[Bloat] Any non-bloaty 4port or 8port GigE switches?

[Bloat] Any non-bloaty 4port or 8port GigE switches?

[leetminiwheat]

[-- Attachment #1: Type: text/plain, Size: 195 bytes --]

Hi, sorry for the noise here but can anyone recommend a decent non-bloated
4port or 8port GigE switch? something supporting bonding/failover would be
a bonus but not a requirement.

Thanks,
-LMW

[-- Attachment #2: Type: text/html, Size: 250 bytes --]

Re: [Bloat] Any non-bloaty 4port or 8port GigE switches?

[leetminiwheat]

[-- Attachment #1: Type: text/plain, Size: 566 bytes --]

Sorry again for the noise, but maybe the old WNDR3800 can be repurposed for
this? Not sure how to do bonding on it however or if it needs hardware
support in the switch. I think 802.3ad link aggregation requires hardware
support but most switches with those are likely bloaty?

On Sun, Jul 3, 2016 at 6:29 PM, leetminiwheat <LeetMiniWheat@gmail.com>
wrote:

> Hi, sorry for the noise here but can anyone recommend a decent non-bloated
> 4port or 8port GigE switch? something supporting bonding/failover would be
> a bonus but not a requirement.
>
> Thanks,
> -LMW
>

[-- Attachment #2: Type: text/html, Size: 908 bytes --]

Re: [Bloat] Any non-bloaty 4port or 8port GigE switches?

[Michael Richardson]

leetminiwheat <LeetMiniWheat@gmail.com> wrote:
    > Sorry again for the noise, but maybe the old WNDR3800 can be repurposed for
    > this? Not sure how to do bonding on it however or if it needs hardware
    > support in the switch. I think 802.3ad link aggregation requires hardware
    > support but most switches with those are likely bloaty?

No, the 3800 can't do GigE wire speed forwarding on it's 4-port part, and to
do any kind of bonding, etc. requires Linux to be involved, so it would be
even slower.

    > Hi, sorry for the noise here but can anyone recommend a decent
    > non-bloated 4port or 8port GigE switch? something supporting
    > bonding/failover would be a bonus but not a requirement.

I could use the same thing too.

--
]               Never tell me the odds!                 | ipv6 mesh networks [
]   Michael Richardson, Sandelman Software Works        | network architect  [
]     mcr@sandelman.ca  http://www.sandelman.ca/        |   ruby on rails    [

Re: [Bloat] Any non-bloaty 4port or 8port GigE switches?

[Mikael Abrahamsson]

On Sun, 3 Jul 2016, leetminiwheat wrote:

> Hi, sorry for the noise here but can anyone recommend a decent non-bloated
> 4port or 8port GigE switch? something supporting bonding/failover would be
> a bonus but not a requirement.

Do you have bloated gig switches? It's usually problem the other way 
around, these devices typically have 128 kilobyte of buffer shared between 
all ports which is way too little.

-- 
Mikael Abrahamsson    email: swmike@swm.pp.se