From: "Wheelock, Ian" <ian.wheelock@commscope.com>
To: Rich Brown <richb.hanover@gmail.com>,
bloat <bloat@lists.bufferbloat.net>
Subject: Re: [Bloat] tp-link request for SQM
Date: Fri, 3 Dec 2021 14:30:08 +0000 [thread overview]
Message-ID: <B37EDC0B-B8CC-496C-B77C-1C87816DB655@commscope.com> (raw)
In-Reply-To: <5F0C4636-DD20-407F-9775-1FADE533DFA7@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4138 bytes --]
I think for the last bullet in the text below, maybe change or remove the comment completely concerning requesting a specific vendor version of the COMCAST XB6 device, as the particular linked document, quite clearly noted the following on Page 18 (just before next steps)
“All Comcast DOCSIS 3.1 RDK-B-based gateway models have now been updated with DOCSIS- PIE AQM59 and all are achieving dramatically improved working latency.”
From: Bloat <bloat-bounces@lists.bufferbloat.net> on behalf of Rich Brown <richb.hanover@gmail.com>
Date: Friday 3 December 2021 at 13:40
To: bloat <bloat@lists.bufferbloat.net>
Subject: Re: [Bloat] tp-link request for SQM
> On Dec 3, 2021, at 7:00 AM, Dave Täht wrote: > > tp-link, is, so far as I know, the last major home router vendor NOT > shipping a SQM system. Perhaps this could be modded up with someones > with ac
External (richb.hanover@gmail.com<mailto:richb.hanover@gmail.com>)
Report This Email<https://protection.inkyphishfence.com/report?id=Y29tbXNjb3BlL2lhbi53aGVlbG9ja0Bjb21tc2NvcGUuY29tLzQ5NWMzNjM3MTY4MmM4ZDExMDY2YzcxNTk3NDg2ODVkLzE2Mzg1Mzg4MzAuMDQ=#key=ea3e82b04aafc9e2dd8d7ebf9fc6d9e3> FAQ<https://www.inky.com/banner-faq/> Protection by INKY<https://www.inky.com>
> On Dec 3, 2021, at 7:00 AM, Dave Täht wrote:
>
> tp-link, is, so far as I know, the last major home router vendor NOT
> shipping a SQM system. Perhaps this could be modded up with someones
> with accounts?
>
> https://secure-web.cisco.com/11W91PAeuwo-7hdmnL6Jde6PdXAD3imeogsT-s7C65Dx8I2Pu52GH6fV_uVNH9jVI_Nh2Rx3mVkAu2Ng8slvdg_9-hGV5nkDASoWcccJOZssODkfz5dQCluVD0mgvqIPZhwxA0KzmwOQe5WWlmbcXHyIC1L1XzqEhHPCpCenRGklMC5oY_cw1XvkuR1ynlvPJJLAlkQT44CdRcGq4TVf13XcO-nfrXbivS6r3ukba6ymIVnqMpOrAE9jMu4gN3wXcialJqG2uxCn-YT6yId636ExtywLnOxLsdqZmZEvNhvNebWCNOTzPRsX3qVtwW1dGKAjMNGeFPAdkyntrBaD8fw/https%3A%2F%2Fcommunity.tp-link.com%2Fus%2Fhome%2Fforum%2Ftopic%2F511156
Wait... what? Other vendors are providing SQM now? Cool!
How should we change the text on https://secure-web.cisco.com/17ZM6mUWyTGtM6W6dXJch5mpXfxAoz6xcZPXEzMBhosTE82sk1FcjnoVn8sQDIbqXhz-kbp7jXMTr5CJqrqFcJUW6fv56C0hLL2mYTBem0WCbWIyKx2Vbl54iNQLMjhsUajbEJYoX_FwEEOME1uEYDPWpV3Iv5QPGBKzieFMJYUrBcbIN23geFerv9GF9iU31Dtbk01Frbwff68UKfTGlHtAGwU5w9H2zjnstlUSCbGwnDQrfov71zbXWDqN4H2XqPBFMGiOvHFa-4wC2e-gJEW4KIT2blbuoViMM8Sk-fzHiH7D3ywfNxQ0zXG9Iz4m5pvfSIa5B_fuA7A9dfS7EUw/https%3A%2F%2Fwww.bufferbloat.net%2Fprojects%2Fbloat%2Fwiki%2FWhat_can_I_do_about_Bufferbloat%2F that says:
> • Install an off-the-shelf router with SQM: Several commercial router vendors have a clue. Here is a list of those we have found:
>
> • IQrouter provides a good setup wizard for configuring SQM, and automatically tunes its settings. IQrouter v3 is good to about 350 mbps. (Version 2 was good for 200-250 mbps.)
> • Ubiquiti gear has fq_codel settings. People say its EdgeRouter will handle over 400 mbps.
> • The eero mesh routers list SQM as a feature. Their third generation devices support SQM at speeds up to a gigabit/second as of November 2021.
> • Many other mesh router vendors claim to solve bufferbloat. Check their spec’s or ask them about latency.
> • Untangle NG Firewall has fq_codel settings.
> • ipfire.org has fq_codel settings.
> • If you’re a Comcast/Xfinity customer, see if you can get the XB6 / CGM4140COM cable modem that has PIE enabled.
> Read p13 of Improving Latency with Active Queue Management (AQM) During COVID-19. for details.
Thanks.
_______________________________________________
Bloat mailing list
Bloat@lists.bufferbloat.net
https://secure-web.cisco.com/1HmA5N75d_XvnakCfiWuf63vdlwXsdLDTm7gwCww5QSntSsN0wavZHAzyITvZtB31x4yw5QI-UuJSpwnzBj5h3Ov-p9jwJaB_yPM-NbWUGVJrsiTF3mSGoq8jPYqs8V61hRoFdYfGDmoV9miQwLYONzPWSCa5J7UNi2cap1M8qSUQUFkOhtC58VPKM_CwQ-QR6DWHMcOglyofPuK7xjZl8jlp64nx4vlRP33_x3GO2My60WYAQd39aG3NixxHnfHeVKrIL9gwAE9STeTo4csI7y8jDO0FdavdV1h97H9EGw8cZKUpVKy_ID7t9LgF7ekpKwHFgRSE8MYhkBWxY7XmEQ/https%3A%2F%2Flists.bufferbloat.net%2Flistinfo%2Fbloat
[-- Attachment #2: Type: text/html, Size: 9169 bytes --]
next prev parent reply other threads:[~2021-12-03 14:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <mailman.1000.1638532808.1267.bloat@lists.bufferbloat.net>
2021-12-03 13:40 ` Rich Brown
2021-12-03 14:30 ` Wheelock, Ian [this message]
2021-12-03 14:36 ` Dave Taht
2021-12-03 14:35 ` Dave Taht
2021-12-02 18:48 Dave Taht
2021-12-03 10:10 ` Kenneth Porter
2021-12-03 10:40 ` Sebastian Moeller
2021-12-03 12:12 ` Wheelock, Ian
2021-12-03 12:43 ` Kenneth Porter
[not found] ` <A5CB878868B38B2F0660B051@192.168.1.16>
2021-12-03 14:23 ` Dave Taht
2021-12-03 12:38 ` Kenneth Porter
2021-12-03 11:59 ` Luca Muscariello
2021-12-03 14:18 ` Dave Taht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/bloat.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B37EDC0B-B8CC-496C-B77C-1C87816DB655@commscope.com \
--to=ian.wheelock@commscope.com \
--cc=bloat@lists.bufferbloat.net \
--cc=richb.hanover@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox