2016-01-20 17:54 GMT+01:00 Brandon Applegate : > > On Jan 20, 2016, at 11:47 AM, Etienne Champetier < > champetier.etienne@gmail.com> wrote: > > Hi Brandon, > > e quickly read the thread (maybe too quickly), > > from what i remember for virtual interface txqueuelen is 0 by default, so > nothing work as expected > can you check the txqueuelen with ip -a ? > (i've found no reference to txqueuelen in sqm-scripts) > > see also > https://wiki.openwrt.org/doc/howto/packet.scheduler/packet.scheduler#tips > > > I haven’t done anything manually to change txqueuelen. Whatever is here > is default (1000 on eth) or I assume set by sqm-scripts / tc (32). > > I believe this is the output you are looking for: > > — > > 1: lo: mtu 65536 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > 2: eth1: mtu 1500 qdisc fq_codel state > UP qlen 1000 > link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff > 3: eth0: mtu 1500 qdisc fq_codel state > UP qlen 1000 > link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff > 4: eth0.666@eth0: mtu 1500 qdisc htb > state UP > link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff > 5: eth0.10@eth0: mtu 1500 qdisc noqueue > state UP > link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff > 6: eth0.11@eth0: mtu 1500 qdisc noqueue > state UP > link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff > 7: ifb0: mtu 1500 qdisc noop state DOWN qlen 32 > link/ether 52:18:cd:a7:ad:71 brd ff:ff:ff:ff:ff:ff > 8: ifb1: mtu 1500 qdisc noop state DOWN qlen 32 > link/ether 5e:f0:86:88:8d:8e brd ff:ff:ff:ff:ff:ff > 11: ifb4eth0.666: mtu 1500 qdisc htb state > UNKNOWN qlen 32 > link/ether 86:68:83:69:2e:b2 brd ff:ff:ff:ff:ff:ff > — > > no qlen means 0 I think maybe try ip link set eth0.666 txqueuelen 1000