From: David Lang <david@lang.hm>
To: jb <justin@dslr.net>
Cc: bloat@lists.bufferbloat.net
Subject: Re: [Bloat] DSLReports Speed Test has latency measurement built-in
Date: Sun, 19 Apr 2015 00:48:24 -0700 (PDT) [thread overview]
Message-ID: <alpine.DEB.2.02.1504190045570.26044@nftneq.ynat.uz> (raw)
In-Reply-To: <alpine.DEB.2.02.1504190027300.26044@nftneq.ynat.uz>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 4322 bytes --]
On Sun, 19 Apr 2015, David Lang wrote:
> As a start, the ping time during the test that shows up in the results page
> is good, but you should show that on the main screen, not just in the
> results+share tab.
Thinking about it, how about a graph showing the ratio of latency under test to
the initial idle latency along with the bandwidth number?
David Lang
> it looked like the main test was showing when the upload was stalled, (white
> under the line instead of color), but this didn't show up in the report tab.
>
> I also think that the retransmit stats are probably worth watching and doing
> something with. You are trying to drive the line to full capacity, so some
> drops/retransmts are expected. How many re expected vs how many are showing
> up?
>
> http://www.dslreports.com/speedtest/320230 (and now you see my pathetic link)
>
> David Lang
>
>
> On Sun, 19 Apr 2015, jb wrote:
>
>> Date: Sun, 19 Apr 2015 15:26:51 +1000
>> From: jb <justin@dslr.net>
>> To: Dave Taht <dave.taht@gmail.com>, bloat@lists.bufferbloat.net
>> Subject: Re: [Bloat] DSLReports Speed Test has latency measurement built-in
>>
>> The graph below the upload and download is what is new.
>> (unfortunately you do have to be logged into the site to see this)
>> it shows the latency during the upload and download, color coded. (see
>> attached image).
>>
>> In your case during the upload it spiked to ~200ms from ~50ms but it was
>> not so bad. During upload, there were no issues with latency.
>>
>> I don't want to force anyone to sign up, just was making sure not to
>> confuse anonymous users with more information than they knew what to do
>> with. When I'm clear how to present the information, I'll make it available
>> by default, to anyone member or otherwise.
>>
>> Also, regarding your download, it stalled out completely for 5 seconds..
>> Hence the low conclusion as to your actual speed. It picked up to full
>> speed again at the end. It basically went
>> 40 .. 40 .. 40 .. 40 .. 8 .. 8 .. 8 .. 40 .. 40 .. 40
>> which explains why the Latency measurements in blue are not all high.
>> A TCP stall? you may want to re-run or re-run with Chrome or Safari to see
>> if it is reproducible. Normally users on your ISP have flat downloads with
>> no stalls.
>>
>> thanks
>> -Justin
>>
>>
>>
>>> On Sun, Apr 19, 2015 at 2:01 PM, Dave Taht <dave.taht@gmail.com> wrote:
>>>
>>>> What I see here is the same old latency, upload, download series, not
>>>> latency and bandwidth at the same time.
>>>>
>>>> http://www.dslreports.com/speedtest/319616
>>>>
>>>> On Sat, Apr 18, 2015 at 5:57 PM, Rich Brown <richb.hanover@gmail.com>
>>>> wrote:
>>>>> Folks,
>>>>>
>>>>> I am delighted to pass along the news that Justin has added latency
>>>> measurements into the Speed Test at DSLReports.com.
>>>>>
>>>>> Go to: https://www.dslreports.com/speedtest and click the button for
>>>> your Internet link. This controls the number of simultaneous connections
>>>> that get established between your browser and the speedtest server. After
>>>> you run the test, click the green "Results + Share" button to see
>>>> detailed
>>>> info. For the moment, you need to be logged in to see the latency
>>>> results.
>>>> There's a "register" link on each page.
>>>>>
>>>>> The speed test measures latency using websocket pings: Justin says that
>>>> a zero-latency link can give 1000 Hz - faster than a full HTTP ping. I
>>>> just
>>>> ran a test and got 48 msec latency from DSLReports, while ping
>>>> gstatic.com gave 38-40 msec, so they're pretty fast.
>>>>>
>>>>> You can leave feedback on this page -
>>>> http://www.dslreports.com/forum/r29910594-FYI-for-general-feedback-on-the-new-speedtest
>>>> - or wait 'til Justin creates a new Bufferbloat topic on the forums.
>>>>>
>>>>> Enjoy!
>>>>>
>>>>> Rich
>>>>> _______________________________________________
>>>>> Bloat mailing list
>>>>> Bloat@lists.bufferbloat.net
>>>>> https://lists.bufferbloat.net/listinfo/bloat
>>>>
>>>>
>>>>
>>>> --
>>>> Dave Täht
>>>> Open Networking needs **Open Source Hardware**
>>>>
>>>> https://plus.google.com/u/0/+EricRaymond/posts/JqxCe2pFr67
>>>> _______________________________________________
>>>> Bloat mailing list
>>>> Bloat@lists.bufferbloat.net
>>>> https://lists.bufferbloat.net/listinfo/bloat
>>>>
>>>
>>>
>
[-- Attachment #2: Type: TEXT/PLAIN, Size: 140 bytes --]
_______________________________________________
Bloat mailing list
Bloat@lists.bufferbloat.net
https://lists.bufferbloat.net/listinfo/bloat
next prev parent reply other threads:[~2015-04-19 7:48 UTC|newest]
Thread overview: 183+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-19 5:26 jb
2015-04-19 7:36 ` David Lang
2015-04-19 7:48 ` David Lang [this message]
2015-04-19 9:33 ` jb
2015-04-19 10:45 ` David Lang
2015-04-19 8:28 ` Alex Burr
2015-04-19 10:20 ` Sebastian Moeller
2015-04-19 10:46 ` Jonathan Morton
2015-04-19 16:30 ` Sebastian Moeller
2015-04-19 17:41 ` Jonathan Morton
2015-04-19 19:40 ` Sebastian Moeller
2015-04-19 20:53 ` Jonathan Morton
2015-04-21 2:56 ` Simon Barber
2015-04-21 4:15 ` jb
2015-04-21 4:47 ` David Lang
2015-04-21 7:35 ` jb
2015-04-21 9:14 ` Steinar H. Gunderson
2015-04-21 14:20 ` David Lang
2015-04-21 14:25 ` David Lang
2015-04-21 14:28 ` David Lang
2015-04-21 22:13 ` jb
2015-04-21 22:39 ` Aaron Wood
2015-04-21 23:17 ` jb
2015-04-22 2:14 ` Simon Barber
2015-04-22 2:56 ` jb
2015-04-22 14:32 ` Simon Barber
2015-04-22 17:35 ` David Lang
2015-04-23 1:37 ` Simon Barber
2015-04-24 16:54 ` David Lang
2015-04-24 17:00 ` Rick Jones
2015-04-21 9:37 ` Jonathan Morton
2015-04-21 10:35 ` jb
2015-04-22 4:04 ` Steinar H. Gunderson
2015-04-22 4:28 ` Eric Dumazet
2015-04-22 8:51 ` [Bloat] RE : " luca.muscariello
2015-04-22 12:02 ` jb
2015-04-22 13:08 ` Jonathan Morton
[not found] ` <14ce17a7810.27f7.e972a4f4d859b00521b2b659602cb2f9@superduper.net>
2015-04-22 14:15 ` Simon Barber
2015-04-22 13:50 ` [Bloat] " Eric Dumazet
2015-04-22 14:09 ` Steinar H. Gunderson
2015-04-22 15:26 ` [Bloat] RE : " luca.muscariello
2015-04-22 15:44 ` [Bloat] " Eric Dumazet
2015-04-22 16:35 ` MUSCARIELLO Luca IMT/OLN
2015-04-22 17:16 ` Eric Dumazet
2015-04-22 17:24 ` Steinar H. Gunderson
2015-04-22 17:28 ` MUSCARIELLO Luca IMT/OLN
2015-04-22 17:45 ` MUSCARIELLO Luca IMT/OLN
2015-04-23 5:27 ` MUSCARIELLO Luca IMT/OLN
2015-04-23 6:48 ` Eric Dumazet
[not found] ` <CAH3Ss96VwE_fWNMOMOY4AgaEnVFtCP3rPDHSudOcHxckSDNMqQ@mail.gmail.com>
2015-04-23 10:08 ` jb
2015-04-24 8:18 ` Sebastian Moeller
2015-04-24 8:29 ` Toke Høiland-Jørgensen
2015-04-24 8:55 ` Sebastian Moeller
2015-04-24 9:02 ` Toke Høiland-Jørgensen
2015-04-24 13:32 ` jb
2015-04-24 13:58 ` Toke Høiland-Jørgensen
2015-04-24 16:51 ` David Lang
2015-04-25 3:15 ` Simon Barber
2015-04-25 4:04 ` Dave Taht
2015-04-25 4:26 ` Simon Barber
2015-04-25 6:03 ` Sebastian Moeller
2015-04-27 16:39 ` Dave Taht
2015-04-28 7:18 ` Sebastian Moeller
2015-04-28 8:01 ` David Lang
2015-04-28 8:19 ` Toke Høiland-Jørgensen
2015-04-28 15:42 ` David Lang
2015-04-28 8:38 ` Sebastian Moeller
2015-04-28 12:09 ` Rich Brown
2015-04-28 15:26 ` David Lang
2015-04-28 15:39 ` David Lang
2015-04-28 11:04 ` Mikael Abrahamsson
2015-04-28 11:49 ` Sebastian Moeller
2015-04-28 12:24 ` Mikael Abrahamsson
2015-04-28 13:44 ` Sebastian Moeller
2015-04-28 19:09 ` Rick Jones
2015-04-28 14:06 ` Dave Taht
2015-04-28 14:02 ` Dave Taht
2015-05-06 5:08 ` Simon Barber
2015-05-06 8:50 ` Sebastian Moeller
2015-05-06 15:30 ` Jim Gettys
2015-05-06 18:03 ` Sebastian Moeller
2015-05-06 20:25 ` Jonathan Morton
2015-05-06 20:43 ` Toke Høiland-Jørgensen
2015-05-07 7:33 ` Sebastian Moeller
2015-05-07 4:29 ` Mikael Abrahamsson
2015-05-07 7:08 ` jb
2015-05-07 7:18 ` Jonathan Morton
2015-05-07 7:24 ` Mikael Abrahamsson
2015-05-07 7:40 ` Sebastian Moeller
2015-05-07 9:16 ` Mikael Abrahamsson
2015-05-07 10:44 ` jb
2015-05-07 11:36 ` Sebastian Moeller
2015-05-07 11:44 ` Mikael Abrahamsson
2015-05-07 13:10 ` Jim Gettys
2015-05-07 13:18 ` Mikael Abrahamsson
2015-05-07 13:14 ` jb
2015-05-07 13:26 ` Neil Davies
2015-05-07 14:45 ` Simon Barber
2015-05-07 22:27 ` Dave Taht
2015-05-07 22:45 ` Dave Taht
2015-05-07 23:09 ` Dave Taht
2015-05-08 2:05 ` jb
2015-05-08 4:16 ` David Lang
2015-05-08 3:54 ` Eric Dumazet
2015-05-08 4:20 ` Dave Taht
2015-05-08 13:20 ` [Bloat] DSLReports Jitter/PDV test Rich Brown
2015-05-08 14:22 ` jb
2015-05-07 7:37 ` [Bloat] DSLReports Speed Test has latency measurement built-in Sebastian Moeller
2015-05-07 7:19 ` Mikael Abrahamsson
2015-05-07 6:19 ` Sebastian Moeller
2015-04-25 3:23 ` Simon Barber
2015-04-24 15:20 ` Bill Ver Steeg (versteb)
2015-04-25 2:24 ` Simon Barber
2015-04-23 10:17 ` renaud sallantin
2015-04-23 14:10 ` Eric Dumazet
2015-04-23 14:38 ` renaud sallantin
2015-04-23 15:52 ` Jonathan Morton
2015-04-23 16:00 ` Simon Barber
2015-04-23 13:17 ` MUSCARIELLO Luca IMT/OLN
2015-04-22 18:22 ` Eric Dumazet
2015-04-22 18:39 ` [Bloat] Pacing --- was " MUSCARIELLO Luca IMT/OLN
2015-04-22 19:05 ` Jonathan Morton
2015-04-22 15:59 ` [Bloat] RE : " Steinar H. Gunderson
2015-04-22 16:16 ` Eric Dumazet
2015-04-22 16:19 ` Dave Taht
2015-04-22 17:15 ` Rick Jones
2015-04-19 12:14 ` [Bloat] " Toke Høiland-Jørgensen
-- strict thread matches above, loose matches on Subject: below --
2015-04-19 12:56 jb
2015-04-19 13:10 ` Toke Høiland-Jørgensen
2015-04-19 13:53 ` jb
2015-04-19 15:38 ` Toke Høiland-Jørgensen
2015-04-19 16:38 ` Toke Høiland-Jørgensen
2015-04-19 17:15 ` Mikael Abrahamsson
2015-04-19 17:43 ` Dave Taht
2015-04-19 19:22 ` Dave Taht
2015-04-23 17:03 ` Dave Taht
2015-04-23 18:04 ` Mikael Abrahamsson
2015-04-23 18:08 ` Jonathan Morton
2015-04-23 20:19 ` jb
2015-04-23 20:39 ` Dave Taht
2015-04-24 21:45 ` Rich Brown
2015-04-25 1:14 ` jb
2015-04-23 21:44 ` Rich Brown
2015-04-23 22:22 ` Dave Taht
2015-04-23 22:29 ` Dave Taht
2015-04-24 1:58 ` Rich Brown
2015-04-24 2:40 ` Dave Taht
2015-04-24 3:20 ` Jim Gettys
2015-04-24 3:39 ` Dave Taht
2015-04-24 4:04 ` Dave Taht
2015-04-24 4:17 ` Dave Taht
2015-04-24 16:13 ` Rick Jones
2015-04-24 5:00 ` jb
2015-04-27 16:28 ` Dave Taht
2015-04-24 16:09 ` Rick Jones
2015-04-24 13:49 ` Pedro Tumusok
2015-04-23 22:51 ` David Lang
2015-04-24 1:38 ` Rich Brown
2015-04-24 4:16 ` Mikael Abrahamsson
2015-04-24 4:24 ` Dave Taht
2015-04-19 17:45 ` Toke Høiland-Jørgensen
2015-04-19 18:26 ` Jonathan Morton
2015-04-19 18:30 ` Toke Høiland-Jørgensen
2015-04-19 19:15 ` Jonathan Morton
2015-04-20 3:15 ` Aaron Wood
2015-04-20 7:00 ` jb
[not found] ` <CACQiMXbF9Uk3H=81at-Z9a2fdYKrRtRorSXRg5dBcPB8-aR4Cw@mail.gmail.com>
2015-04-20 8:11 ` jb
2015-04-19 19:19 ` Mikael Abrahamsson
2015-04-19 21:57 ` Rich Brown
2015-04-19 23:21 ` jb
2015-04-20 14:51 ` David Lang
2015-04-20 15:51 ` Dave Taht
2015-04-20 16:15 ` Dave Taht
2015-04-19 0:57 Rich Brown
2015-04-19 4:01 ` Dave Taht
2015-04-20 14:33 ` Colin Dearborn
2015-04-19 8:29 ` Dave Taht
2015-04-19 8:38 ` Dave Taht
2015-04-19 12:21 ` jb
2015-04-19 9:17 ` MUSCARIELLO Luca IMT/OLN
2015-04-19 12:03 ` jb
2015-04-19 10:53 ` dikshie
2015-04-19 12:11 ` jb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/bloat.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.02.1504190045570.26044@nftneq.ynat.uz \
--to=david@lang.hm \
--cc=bloat@lists.bufferbloat.net \
--cc=justin@dslr.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox