Re: [Cake] How to test Cake on TP-Link WDR3600

["Alec Robertson" <alecrobertson13@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 2977 bytes --]

I’ve uploaded all the files to the router and rebooted and very oddly, “cake" doesn’t show up as a qdisc but “layer_cake.qos” and “piece_of_cake.qos” show up as Queue setup scripts.


Weird.


--
Alec Robertson

On Sat, Jul 25, 2015 at 6:15 PM, Sebastian Moeller <moeller0@gmx.de>
wrote:

> Hi Alec,
> On Jul 25, 2015, at 18:49 , Alec Robertson <alecrobertson13@gmail.com> wrote:
>> Well I've already got confused and we haven't even started yet - my apologies.
> Then we are off to a good start ;)
>> 
>> When you say "...select cake as qdisc and piece_of_cake.qos as script..." how exactly do you do that?
> 	Ah, this requires luci-app-sqm, you might be able to install this from the router’s GUI or it might be installed already; there should be a SQM tab in the network menu and there you should be able to configure things. http://wiki.openwrt.org/doc/howto/sqm has some advice about how to set things up. Please have a look and let me know what specific questions arise ;)
> Best Regards
> 	Sebastian
>> 
>> Again I'm sorry if I'm being silly! :P
>> 
>> 
>> Yours sincerely,
>> Alec Robertson.
>> 
>> On 25 July 2015 at 17:27, Sebastian Moeller <moeller0@gmx.de> wrote:
>> Hi Alec,
>> 
>> On Jul 25, 2015, at 17:45 , Alec Robertson <alecrobertson13@gmail.com> wrote:
>> 
>> > Hello,
>> >
>> > I’ve flashed the OpenWRT image for the TP-Link WDR3600 from 2015-06-23 (http://snapon.lab.bufferbloat.net/~cero3/lupin/ar71xx/) and it has installed correctly.
>> >
>> > How do I go about setting it up for my UK TalkTalk Fibre connection (using a VDSL modem connected to the TP-Link router: the TP-Link router gets an IP address via DHCP).
>> >
>> > My sincere apologies if any of this is really obvious and I’ve been silly and missed it.
>> 
>>         Maybe try luci-app-sqm and sqm scripts? 
>> Attached you will find the most recent files for sqm-scripts, just move all the files in the archive to the corresponding locations on your router and the select cake as qdisc and piece_of_cake.qos as script. (You might need a more recent luck-app-sqm, but first try what happens if you try the new scripts). After using the GUI to properly configure your interface you can always run either:
>> /etc/init.d/sqm stop
>> or
>> /etc/init.d/sqm start
>> to stop and start sqm-scripts manually. Running:
>> tc -d qdisc
>> should give you some feedback whether things worked as you intended. If you want to tests this I am happy to help you along the way, just holler where things break ;).
>> 
>> Best Regards
>>         Sebastian
>> 
>> 
>> >
>> >
>> > —
>> > Alec Robertson
>> > _______________________________________________
>> > Cake mailing list
>> > Cake@lists.bufferbloat.net
>> > https://lists.bufferbloat.net/listinfo/cake
>> 
>> 
>> 
>> _______________________________________________
>> Cake mailing list
>> Cake@lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/cake

[-- Attachment #2: Type: text/html, Size: 3884 bytes --]