I’ve uploaded all the files to the router and rebooted and very oddly, “cake" doesn’t show up as a qdisc but “layer_cake.qos” and “piece_of_cake.qos” show up as Queue setup scripts.

Weird.

--
Alec Robertson


On Sat, Jul 25, 2015 at 6:15 PM, Sebastian Moeller <moeller0@gmx.de> wrote:

Hi Alec,


On Jul 25, 2015, at 18:49 , Alec Robertson <alecrobertson13@gmail.com> wrote:

> Well I've already got confused and we haven't even started yet - my apologies.

Then we are off to a good start ;)

>
> When you say "...select cake as qdisc and piece_of_cake.qos as script..." how exactly do you do that?

Ah, this requires luci-app-sqm, you might be able to install this from the router’s GUI or it might be installed already; there should be a SQM tab in the network menu and there you should be able to configure things. http://wiki.openwrt.org/doc/howto/sqm has some advice about how to set things up. Please have a look and let me know what specific questions arise ;)

Best Regards
Sebastian


>
> Again I'm sorry if I'm being silly! :P
>
>
> Yours sincerely,
> Alec Robertson.
>
> On 25 July 2015 at 17:27, Sebastian Moeller <moeller0@gmx.de> wrote:
> Hi Alec,
>
> On Jul 25, 2015, at 17:45 , Alec Robertson <alecrobertson13@gmail.com> wrote:
>
> > Hello,
> >
> > I’ve flashed the OpenWRT image for the TP-Link WDR3600 from 2015-06-23 (http://snapon.lab.bufferbloat.net/~cero3/lupin/ar71xx/) and it has installed correctly.
> >
> > How do I go about setting it up for my UK TalkTalk Fibre connection (using a VDSL modem connected to the TP-Link router: the TP-Link router gets an IP address via DHCP).
> >
> > My sincere apologies if any of this is really obvious and I’ve been silly and missed it.
>
> Maybe try luci-app-sqm and sqm scripts?
> Attached you will find the most recent files for sqm-scripts, just move all the files in the archive to the corresponding locations on your router and the select cake as qdisc and piece_of_cake.qos as script. (You might need a more recent luck-app-sqm, but first try what happens if you try the new scripts). After using the GUI to properly configure your interface you can always run either:
> /etc/init.d/sqm stop
> or
> /etc/init.d/sqm start
> to stop and start sqm-scripts manually. Running:
> tc -d qdisc
> should give you some feedback whether things worked as you intended. If you want to tests this I am happy to help you along the way, just holler where things break ;).
>
> Best Regards
> Sebastian
>
>
> >
> >
> > —
> > Alec Robertson
> > _______________________________________________
> > Cake mailing list
> > Cake@lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/cake
>
>
>
> _______________________________________________
> Cake mailing list
> Cake@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cake