> > Weird. > > -- > Alec Robertson > > > On Sat, Jul 25, 2015 at 6:15 PM, Sebastian Moeller wrote: > > Hi Alec, > > > On Jul 25, 2015, at 18:49 , Alec Robertson wrote: > > > Well I've already got confused and we haven't even started yet - my apologies. > > Then we are off to a good start ;) > > > > > When you say "...select cake as qdisc and piece_of_cake.qos as script..." how exactly do you do that? > > Ah, this requires luci-app-sqm, you might be able to install this from the router’s GUI or it might be installed already; there should be a SQM tab in the network menu and there you should be able to configure things. http://wiki.openwrt.org/doc/howto/sqm has some advice about how to set things up. Please have a look and let me know what specific questions arise ;) > > Best Regards > Sebastian > > > > > > Again I'm sorry if I'm being silly! :P > > > > > > Yours sincerely, > > Alec Robertson. > > > > On 25 July 2015 at 17:27, Sebastian Moeller wrote: > > Hi Alec, > > > > On Jul 25, 2015, at 17:45 , Alec Robertson wrote: > > > > > Hello, > > > > > > I’ve flashed the OpenWRT image for the TP-Link WDR3600 from 2015-06-23 (http://snapon.lab.bufferbloat.net/~cero3/lupin/ar71xx/) and it has installed correctly. > > > > > > How do I go about setting it up for my UK TalkTalk Fibre connection (using a VDSL modem connected to the TP-Link router: the TP-Link router gets an IP address via DHCP). > > > > > > My sincere apologies if any of this is really obvious and I’ve been silly and missed it. > > > > Maybe try luci-app-sqm and sqm scripts? > > Attached you will find the most recent files for sqm-scripts, just move all the files in the archive to the corresponding locations on your router and the select cake as qdisc and piece_of_cake.qos as script. (You might need a more recent luck-app-sqm, but first try what happens if you try the new scripts). After using the GUI to properly configure your interface you can always run either: > > /etc/init.d/sqm stop > > or > > /etc/init.d/sqm start > > to stop and start sqm-scripts manually. Running: > > tc -d qdisc > > should give you some feedback whether things worked as you intended. If you want to tests this I am happy to help you along the way, just holler where things break ;). > > > > Best Regards > > Sebastian > > > > > > > > > > > > > — > > > Alec Robertson > > > _______________________________________________ > > > Cake mailing list > > > Cake@lists.bufferbloat.net > > > https://lists.bufferbloat.net/listinfo/cake > > > > > > > > _______________________________________________ > > Cake mailing list > > Cake@lists.bufferbloat.net > > https://lists.bufferbloat.net/listinfo/cake > > > > _______________________________________________ > Cake mailing list > Cake@lists.bufferbloat.net > https://lists.bufferbloat.net/listinfo/cake