Assuming you’re using luci to configure then enabling both show and use advanced configuration & show and use dangerous configurations… then enter ‘ingress’ in the ‘advanced option string to pass to ingress queuing’ will enable ingress mode. Maybe that helps? > On 24 Apr 2018, at 20:04, Jonas Mårtensson wrote: > > > > On Tue, Apr 24, 2018 at 1:45 PM, Toke Høiland-Jørgensen wrote: > Jonas Mårtensson writes: > > > One thing that is still not clear to me from these results: if I run > > cake on an IFB without ingress mode (i.e. the default?), does the MTU > > scaling have any impact on TCP download throughput? > > Odds are that not using ingress mode will make Cake lose control of the > bottleneck (that is what happened when I tried running a quick test), > and so will mess up both latency and throughput as you hit the bloated > upstream link buffer... > > So using cake through sqm-scripts in OpenWRT/LEDE for ingress shaping does not currently work very well then? I guess the sqm-scripts should be updated to actually use ingress mode at some point... > > /Jonas > _______________________________________________ > Cake mailing list > Cake@lists.bufferbloat.net > https://lists.bufferbloat.net/listinfo/cake Cheers, Kevin D-B 012C ACB2 28C6 C53E 9775 9123 B3A2 389B 9DE2 334A