Could you set the ingress shaper to 50% of you true ingress rate and try again, please? Also could you post the results of 'tc -d qdisc' with your current settings and with the 50% settings (I will probably ask for more data...)? And finally I believe you are on an ADSL link, what are the sync rates reported by the modem, and which ISP are you with (I ask, as some ISPs actually employ a shaper at their BRAS, so the modem sync rate might not be the actual bottleneck bandwidth). That said, with wrong shaper settings I would rather expect increased latency under load, but not bandwidth violations. Best Regards Sebastian On October 27, 2016 2:16:06 AM GMT+02:00, "G. Amanakis" wrote: >I mean that the ingress limit on WAN (or egress limit on LAN) seems to >be ignored, and the rate bmon and bwm-ng report is the maximum >achievable. I.e. on 450kbyte/s ingress with the limit set at >400kbyte/s, when bittorrent is in use bmon reports 450kbyte/s after >10-20 seconds. > >------------------------------------------------------------------------ > >_______________________________________________ >Cake mailing list >Cake@lists.bufferbloat.net >https://lists.bufferbloat.net/listinfo/cake