From: Georgios Amanakis <gamanakis@gmail.com>
To: Dave Taht <dave.taht@gmail.com>
Cc: Cake List <cake@lists.bufferbloat.net>
Subject: Re: [Cake] cake flenter results round 3
Date: Fri, 1 Dec 2017 14:29:00 -0500 [thread overview]
Message-ID: <CACvFP_hDLL7V149f1wGW6LUzNy50WO9dLYYMabYJcu2k_nh9Eg@mail.gmail.com> (raw)
In-Reply-To: <CAA93jw7oGMx_f8qzTQJomfgiiz39T5iw_Axu5nLRndniTLgeJg@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2292 bytes --]
cake vs sfq and fq_codel looks great! You already have fq_codel in the
graphs, do you mean codel?
In terms of simulating CMTS I am trying to simulate a cable connection.
Is the following reasonable?
===========8<===========
servers --- delay --- isp --- mbox --- clients
delay:
tc qdisc replace dev delay.r root netem delay ZZms rate XXXmbit limit 100000
tc qdisc replace dev delay.l root netem delay ZZms rate XXXmbit limit 100000
isp:
tc qdisc replace dev isp.l root bfifo limit 1024k
tc qdisc replace dev isp.r root bfifo limit 1024k
mbox:
tc qdisc replace dev mbox.l root cake bandwidth YYYmbit
tc qdisc replace dev mbox.r root cake bandwidth YYYmbit
===========8<===========
George
On Fri, Dec 1, 2017 at 2:23 PM, Dave Taht <dave.taht@gmail.com> wrote:
> That's really hard to argue with. An fq_codel same conditions (and
> pfifo and pie) might be interesting here.
>
> On Thu, Nov 30, 2017 at 9:13 AM, Georgios Amanakis <gamanakis@gmail.com>
> wrote:
> > I gave high RTT with high bandwidth a try:
> > server -- delay -- mbox -- client
> > netserver 300/300ms 45/900mbit flent
> >
> > I had to run flent with "-s 0.61" in order to avoid errors with fping
> dying
> > prematurely.
> > Comparing noack, ack, and ack-aggressive, ack seems to give the highest
> > download rates.
> > Cake was setup with "rtt 600ms".
> >
> > George
> >
> > On Wed, Nov 29, 2017 at 6:25 PM, Jonathan Morton <chromatix99@gmail.com>
> > wrote:
> >>
> >> High RTT with relatively high bandwidth is traditionally considered
> >> challenging, and is representative of Australasian and satellite
> >> connections. Definitely do some of those.
> >>
> >> Low bandwidth should also be interesting. DSL at 4/1 Mbit is typical
> >> entry level package here.
> >>
> >> - Jonathan Morton
> >>
> >>
> >> _______________________________________________
> >> Cake mailing list
> >> Cake@lists.bufferbloat.net
> >> https://lists.bufferbloat.net/listinfo/cake
> >>
> >
> >
> > _______________________________________________
> > Cake mailing list
> > Cake@lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/cake
> >
>
>
>
> --
>
> Dave Täht
> CEO, TekLibre, LLC
> http://www.teklibre.com
> Tel: 1-669-226-2619
>
[-- Attachment #2: Type: text/html, Size: 3915 bytes --]
next prev parent reply other threads:[~2017-12-01 19:29 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-29 23:18 Pete Heist
2017-11-29 23:25 ` Jonathan Morton
2017-11-30 17:13 ` Georgios Amanakis
2017-11-30 17:22 ` Jonathan Morton
2017-11-30 18:07 ` Georgios Amanakis
2017-11-30 18:13 ` Jonathan Morton
2017-11-30 18:17 ` Georgios Amanakis
2017-11-30 18:27 ` Jonathan Morton
2017-11-30 18:32 ` Georgios Amanakis
2017-12-01 18:09 ` Dave Taht
2017-12-01 18:21 ` Dave Taht
2017-11-30 20:17 ` Georgios Amanakis
2017-11-30 21:06 ` Georgios Amanakis
2017-11-30 18:01 ` Dave Taht
2017-11-30 21:03 ` Toke Høiland-Jørgensen
2017-11-30 21:11 ` Georgios Amanakis
2017-11-30 21:29 ` Georgios Amanakis
2017-11-30 21:38 ` Toke Høiland-Jørgensen
2017-11-30 21:58 ` Georgios Amanakis
2017-12-01 0:46 ` Cannot install tc-adv(for cake) on Fedora 27 Yutaka
[not found] ` <mailman.1238.1512089192.3609.cake@lists.bufferbloat.net>
2017-12-01 1:40 ` [Cake] " Jonathan Morton
2017-12-01 1:52 ` Bret Towe
[not found] ` <CAJq5cE0u2f0OnC-Tv5pLed8QUkWj+296gokBhKDLwa9adJ6CPA@mail.gmail.com>
[not found] ` <CAJq5cE0kj3RekGBCoRXFhtpDLBreZmRXte6vzAO589jTBXvPbw@mail.gmail.com>
2017-12-01 3:32 ` Jonathan Morton
2017-12-01 4:10 ` Bret Towe
2017-12-01 1:53 ` Yutaka
2017-12-01 12:49 ` [Cake] cake flenter results round 3 Toke Høiland-Jørgensen
2017-11-30 21:32 ` Toke Høiland-Jørgensen
2017-11-30 21:34 ` Georgios Amanakis
2017-12-01 19:23 ` Dave Taht
2017-12-01 19:29 ` Georgios Amanakis [this message]
2017-12-01 19:45 ` Dave Taht
2017-12-01 19:46 ` Dave Taht
2017-12-01 21:41 ` Georgios Amanakis
2017-12-02 1:23 ` Dave Taht
[not found] ` <CACvFP_hJJ22_Y032GzAe1rPpDFZK_Fbe+4Pqw9zBXntyaqUAkQ@mail.gmail.com>
2017-12-02 1:25 ` [Cake] Fwd: " Georgios Amanakis
2017-12-02 1:31 ` [Cake] " Georgios Amanakis
2017-12-02 1:37 ` Georgios Amanakis
2017-12-02 1:41 ` Dave Taht
2017-12-02 17:47 ` George Amanakis
2017-12-02 17:59 ` Dave Taht
2017-12-02 18:30 ` George Amanakis
2017-12-02 18:41 ` Dave Taht
2017-12-02 18:34 ` Dave Taht
2017-12-02 23:50 ` Georgios Amanakis
2018-01-02 22:54 ` Kristjan Onu
2018-01-07 20:23 ` Kristjan Onu
2017-11-30 6:28 ` Dave Taht
2017-11-30 19:26 ` Cannot Install cake qdisc to CentOS7 Yutaka
[not found] ` <mailman.1227.1512070029.3609.cake@lists.bufferbloat.net>
[not found] ` <CACvFP_hnRgCsV4NiZT66xfiEjzh_jsT_u_kPjQ0XxzGpHRLi3A@mail.gmail.com>
2017-11-30 19:40 ` [Cake] " Yutaka
2017-11-30 19:40 ` Yutaka
2017-12-01 19:08 ` [Cake] cake flenter results round 3 Dave Taht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/cake.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CACvFP_hDLL7V149f1wGW6LUzNy50WO9dLYYMabYJcu2k_nh9Eg@mail.gmail.com \
--to=gamanakis@gmail.com \
--cc=cake@lists.bufferbloat.net \
--cc=dave.taht@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox