Re: [Cake] cake separate qos for lan

[Allan Pinto <allan316@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1808 bytes --]

> Is the cache inside or outside the point where the router is fitted
 outside..

Cache-Server
       |
internet Gateway ---> L2 switch   --> LInux router with cake - - [ pppoe
connection ]  --> customer



>Also, the command shown will apply a limit to *egress* traffic on the
given port.  If you need to do *ingress* shaping, there’s a different
sequence of commands
i have put the ingress commands, i did not mention them as i did not have
any need of changes there.



On Sun, Mar 27, 2016 at 3:44 AM, Jonathan Morton <chromatix99@gmail.com>
wrote:

>
> > On 26 Mar, 2016, at 17:14, Allan Pinto <allan316@gmail.com> wrote:
> >
> > I'm experimenting in replacing a mikrotik router with plain linux. by
> following the instructions on the cake page, i have setup the following
> line in the /etc/ppp/ip-ip script so that the user will be limited to
> bandwidth using cake.
> >
> > /usr/sbin/tc qdisc add dev $pppdev root cake bandwidth ${BURST_DOWN}bit
> >
> > but i have certain lan traffic available to the customer which should be
> available at higher speed, for eg. cache traffic and i want to set that
> speed to 20mbit default .
> >
> > if i understand correctly i will have to mark traffic coming in from
> that lan source using iptables, can someone guide me how to set bandwidth
> only for that source to be higher.
>
> I’m not certain what your topology is here.  Is the cache inside or
> outside the point where the router is fitted, or is it within the router,
> or off to the side on a separate port?
>
> Also, the command shown will apply a limit to *egress* traffic on the
> given port.  If you need to do *ingress* shaping, there’s a different
> sequence of commands.
>
>  - Jonathan Morton
>
>


-- 
Thanx and regd's.

Allan.

[-- Attachment #2: Type: text/html, Size: 3080 bytes --]