It does. On 21 July 2018 at 20:02, Dave Taht wrote: > In other news: > > https://github.com/tohojo/sqm-scripts/issues/68 > > does the ER4 have act_police? > > On Sat, Jul 21, 2018 at 10:55 AM Arie wrote: > > > > It's Ziggo NL/Liberty Global. I'm surprised by the reported latency in > the fast.com test. Both the site and the flent ping test report about the > same 60-ish ms. DSLReports and flent RRUL report way more bufferbloat, so > I guess those stress my connection more than fast.com > > > > > > On 21 July 2018 at 19:45, Dave Taht wrote: > >> > >> Thank you. At least for your ISP (?), at 250mbit, you can hold the > >> damage down to something reasonable, and certainly you are winning big > >> on the upload. > >> > >> Good to know the ER4 can keep up, also. > >> On Sat, Jul 21, 2018 at 10:36 AM Arie wrote: > >> > > >> > Unshaped reno attached. > >> > > >> > On 21 July 2018 at 19:27, Dave Taht wrote: > >> >> > >> >> Yours is not as horrific as mine in either case. > >> >> > >> >> Can you provide an unshaped result as well? > >> >> > >> >> > >> >> On Sat, Jul 21, 2018 at 10:24 AM Arie wrote: > >> >> > > >> >> > Two more data points. Shaped my connection to 250Mbit out of the > advertised 250Mbit (my usual setting) and shaped to 200Mbit out of the > 250Mbit. This is a pre-linux-net-next cake running on an Edgemax ER4 with > kernel 3.10.107-UBNT. > >> >> > > >> >> > The regular spikes in ICMP ping is due to the crappy Puma 6 > chipset in the cable modem. UDP is not affected. > >> >> > > >> >> > On 21 July 2018 at 19:20, Georgios Amanakis > wrote: > >> >> >> > >> >> >> On Sat, 2018-07-21 at 09:09 -0700, Dave Taht wrote: > >> >> >> > > >> >> >> > 1) Can someone else on a cablemodem (even without the latest > cake, > >> >> >> > this happens to me on older cake and fq_codel) try this test? > >> >> >> > > >> >> >> > >> >> >> I just tried this on my cable comcast connection. I set ingress > to ~80% > >> >> >> of what fast.com reports when no shaper is in place. > >> >> >> > >> >> >> #tc qdisc add dev ens4 root handle 8011 cake bandwidth 16000kbit > dual- > >> >> >> dsthost docsis ingress > >> >> >> #tc qdisc add dev ens3 root handle 8012 cake bandwidth 2500kbit > dual- > >> >> >> srchost nat docsis ack-filter > >> >> >> > >> >> >> I got the same result as you. This is using latest cake. > >> >> >> > >> >> >> Georgios > >> >> >> > >> >> >> _______________________________________________ > >> >> >> Cake mailing list > >> >> >> Cake@lists.bufferbloat.net > >> >> >> https://lists.bufferbloat.net/listinfo/cake > >> >> >> > >> >> > > >> >> > _______________________________________________ > >> >> > Cake mailing list > >> >> > Cake@lists.bufferbloat.net > >> >> > https://lists.bufferbloat.net/listinfo/cake > >> >> > >> >> > >> >> > >> >> -- > >> >> > >> >> Dave Täht > >> >> CEO, TekLibre, LLC > >> >> http://www.teklibre.com > >> >> Tel: 1-669-226-2619 > >> > > >> > > >> > >> > >> -- > >> > >> Dave Täht > >> CEO, TekLibre, LLC > >> http://www.teklibre.com > >> Tel: 1-669-226-2619 > > > > > > > -- > > Dave Täht > CEO, TekLibre, LLC > http://www.teklibre.com > Tel: 1-669-226-2619 >