Hi Alec,

On Jul 25, 2015, at 17:45 , Alec Robertson <alecrobertson13@gmail.com> wrote:

> Hello,
>
> I’ve flashed the OpenWRT image for the TP-Link WDR3600 from 2015-06-23 (http://snapon.lab.bufferbloat.net/~cero3/lupin/ar71xx/) and it has installed correctly.
>
> How do I go about setting it up for my UK TalkTalk Fibre connection (using a VDSL modem connected to the TP-Link router: the TP-Link router gets an IP address via DHCP).
>
> My sincere apologies if any of this is really obvious and I’ve been silly and missed it.

        Maybe try luci-app-sqm and sqm scripts?
Attached you will find the most recent files for sqm-scripts, just move all the files in the archive to the corresponding locations on your router and the select cake as qdisc and piece_of_cake.qos as script. (You might need a more recent luck-app-sqm, but first try what happens if you try the new scripts). After using the GUI to properly configure your interface you can always run either:
/etc/init.d/sqm stop
or
/etc/init.d/sqm start
to stop and start sqm-scripts manually. Running:
tc -d qdisc
should give you some feedback whether things worked as you intended. If you want to tests this I am happy to help you along the way, just holler where things break ;).

Best Regards
        Sebastian


>
>
> —
> Alec Robertson
> _______________________________________________
> Cake mailing list
> Cake@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cake