From: Dendari Marini <dendari92@gmail.com>
To: Sebastian Moeller <moeller0@gmx.de>, cake@lists.bufferbloat.net
Subject: Re: [Cake] Getting Cake to work better with Steam and similar applications
Date: Thu, 20 Apr 2017 17:23:02 +0200 [thread overview]
Message-ID: <CANCX+3M+bw3X=+WLm99+MshjM38Z0PE4O+X16s2GtKUpsNAmWg@mail.gmail.com> (raw)
In-Reply-To: <F0444D6F-7D4C-4408-9502-91787A1561F6@gmx.de>
[-- Attachment #1: Type: text/plain, Size: 5873 bytes --]
> Could you post the output of calling “tc -s qdisc” here on the list
please? That should allow to figure out what you actually told cake to do ;0
> /home/ubnt$ sudo tc -s qdisc
> qdisc pfifo_fast 0: dev switch0 root refcnt 2 bands 3 priomap 1 2 2 2 1 2
> 0 0 1 1 1 1 1 1 1 1
> Sent 133387235 bytes 191612 pkt (dropped 0, overlimits 0 requeues 0)
> backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev imq0 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0
> 0 1 1 1 1 1 1 1 1
> Sent 288 bytes 9 pkt (dropped 0, overlimits 0 requeues 0)
> backlog 0b 0p requeues 0
> qdisc cake 8001: dev eth0 root refcnt 2 bandwidth 900Kbit diffserv3
> dual-srchost nat rtt 100.0ms raw
> Sent 183589 bytes 1316 pkt (dropped 6, overlimits 627 requeues 0)
> backlog 0b 0p requeues 0
> memory used: 91392b of 4Mb
> capacity estimate: 900Kbit
> Bulk Best Effort Voice
> thresh 56248bit 900Kbit 225Kbit
> target 323.0ms 20.2ms 80.7ms
> interval 646.0ms 115.2ms 161.5ms
> pk_delay 0us 7.8ms 4us
> av_delay 0us 695us 0us
> sp_delay 0us 5us 0us
> pkts 0 1314 8
> bytes 0 188234 336
> way_inds 0 0 0
> way_miss 0 98 1
> way_cols 0 0 0
> drops 0 6 0
> marks 0 0 0
> sp_flows 0 1 0
> bk_flows 0 1 0
> un_flows 0 0 0
> max_len 0 1514 42
> qdisc ingress ffff: dev eth0 parent ffff:fff1 ----------------
> Sent 1396868 bytes 1615 pkt (dropped 0, overlimits 0 requeues 0)
> backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev eth1 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0
> 0 1 1 1 1 1 1 1 1
> Sent 822 bytes 13 pkt (dropped 0, overlimits 0 requeues 0)
> backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev eth2 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0
> 0 1 1 1 1 1 1 1 1
> Sent 822 bytes 13 pkt (dropped 0, overlimits 0 requeues 0)
> backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev eth3 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0
> 0 1 1 1 1 1 1 1 1
> Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
> backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev eth4 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0
> 0 1 1 1 1 1 1 1 1
> Sent 822 bytes 13 pkt (dropped 0, overlimits 0 requeues 0)
> backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev pppoe0 root refcnt 2 bands 3 priomap 1 2 2 2 1 2
> 0 0 1 1 1 1 1 1 1 1
> Sent 23509667 bytes 164606 pkt (dropped 0, overlimits 0 requeues 0)
> backlog 0b 0p requeues 0
> qdisc cake 8002: dev ifb4eth0 root refcnt 2 bandwidth 16Mbit diffserv3
> dual-dsthost nat ingress rtt 100.0ms raw
> Sent 1394936 bytes 1483 pkt (dropped 2, overlimits 1380 requeues 0)
> backlog 0b 0p requeues 0
> memory used: 47872b of 4Mb
> capacity estimate: 16Mbit
> Bulk Best Effort Voice
> thresh 1Mbit 16Mbit 4Mbit
> target 18.2ms 5.0ms 5.0ms
> interval 113.2ms 100.0ms 10.0ms
> pk_delay 0us 979us 8us
> av_delay 0us 277us 0us
> sp_delay 0us 4us 0us
> pkts 0 1479 6
> bytes 0 1396354 360
> way_inds 0 0 0
> way_miss 0 76 1
> way_cols 0 0 0
> drops 0 2 0
> marks 0 0 0
> sp_flows 0 2 0
> bk_flows 0 1 0
> un_flows 0 0 0
> max_len 0 1514 60
Sorry, the formatting isn't that great :\
And yeah I know my upload isn't that great either
On 20 April 2017 at 15:43, Sebastian Moeller <moeller0@gmx.de> wrote:
> Hi,
>
> > On Apr 20, 2017, at 15:39, Dendari Marini <dendari92@gmail.com> wrote:
> >
> > Hello,
> >
> > Not sure if this is the right place, just recently discovered about the
> bufferbloat issue, so I'm still learning new things every day.
> >
> > I bought an Ubiquiti EdgeRouter X just for this and for the most part
> the built-in Smart Queue (which uses fq_codel + HTB) works wonderfully but
> there are some applications which still give me issues.
> >
> > In particular I'm currently trying to resolve these issues with Steam,
> which doesn't seem to be affected much by the Smart Queue. Someone
> suggested to use Cake Cobalt, which I'm currently using, but I can't seem
> to get any better result.
> >
> > From my understanding I should at least get fairer per-host bandwidth,
> but when one PC is downloading with Steam the other will only receive ~15%
> of the total bandwidth.
>
> Could you post the output of calling “tc -s qdisc” here on the
> list please? That should allow to figure out what you actually told cake to
> do ;0
>
>
> >
> > My connection isn't really fast (just 16/0.9 Mbitps ADSL)
>
> That uplink is going to be painful no matter what.
>
> Best Regards
>
> > and I have only two PCs connected via ethernet to the EdgeRouter X plus
> a WiFi access point which is mainly used by smartphones. I haven't done any
> particular change to the ER-X so for the most is kinda stock.
> >
> > Any advice?
> > _______________________________________________
> > Cake mailing list
> > Cake@lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/cake
>
>
[-- Attachment #2: Type: text/html, Size: 7442 bytes --]
next prev parent reply other threads:[~2017-04-20 15:23 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-20 13:39 Dendari Marini
2017-04-20 13:43 ` Sebastian Moeller
2017-04-20 15:23 ` Dendari Marini [this message]
2017-04-20 15:32 ` Jonathan Morton
2017-04-20 16:05 ` Dendari Marini
2017-04-20 17:12 ` Andy Furniss
2017-04-20 17:36 ` Jonathan Morton
2017-04-20 18:35 ` Sebastian Moeller
2017-04-20 18:36 ` Sebastian Moeller
2017-04-21 8:34 ` Dendari Marini
2017-04-21 13:25 ` Sebastian Moeller
2017-04-21 13:27 ` Dendari Marini
2017-04-22 8:25 ` Dendari Marini
2017-04-22 9:36 ` Jonathan Morton
2017-04-22 12:50 ` xnoreq
2017-04-22 13:41 ` Tristan Seligmann
2017-04-22 13:51 ` Andy Furniss
2017-04-22 14:03 ` Andy Furniss
2017-04-22 16:38 ` Andy Furniss
2017-04-22 16:45 ` Dave Taht
2017-04-22 17:00 ` Tristan Seligmann
2017-04-22 20:24 ` Andy Furniss
2017-04-22 16:47 ` Sebastian Moeller
2017-04-22 21:56 ` Dendari Marini
2017-04-22 22:15 ` Sebastian Moeller
2017-04-23 12:32 ` David Lang
2017-04-24 7:55 ` Sebastian Moeller
2017-04-24 8:41 ` Dendari Marini
2017-04-24 11:34 ` Sebastian Moeller
2017-04-24 12:08 ` Dendari Marini
2017-04-24 12:35 ` Sebastian Moeller
2017-04-24 13:49 ` Dendari Marini
2017-04-24 15:42 ` Sebastian Moeller
2017-04-24 17:32 ` Sebastian Moeller
2017-04-25 10:26 ` Andy Furniss
2017-04-25 11:24 ` Dendari Marini
2017-04-25 12:58 ` Andy Furniss
2017-04-25 18:22 ` Dendari Marini
2017-04-25 19:10 ` Jonathan Morton
2017-04-25 20:44 ` Dendari Marini
2017-04-25 21:32 ` Andy Furniss
2017-04-25 22:33 ` Benjamin Cronce
2017-04-28 15:37 ` Dendari Marini
2017-04-29 15:11 ` Andy Furniss
2017-04-29 17:30 ` Jonathan Morton
2017-04-29 18:29 ` Andy Furniss
2017-04-30 0:05 ` Andy Furniss
2017-05-01 5:50 ` Jonathan Morton
2017-05-01 11:32 ` Andy Furniss
2017-05-01 12:08 ` Jonathan Morton
2017-05-01 13:03 ` Andy Furniss
2017-05-01 13:11 ` Jonathan Morton
2017-05-01 14:46 ` Andy Furniss
2017-04-25 21:06 ` Andy Furniss
2017-04-25 21:16 ` Neil Shepperd
2017-04-25 21:37 ` Andy Furniss
2017-04-25 21:43 ` Sebastian Moeller
2017-04-25 22:06 ` Andy Furniss
2017-04-25 22:29 ` Andy Furniss
2017-04-25 22:32 ` Andy Furniss
2017-04-22 22:35 ` Andy Furniss
2017-04-22 14:12 ` Sebastian Moeller
2017-04-20 18:16 ` Sebastian Moeller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/cake.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CANCX+3M+bw3X=+WLm99+MshjM38Z0PE4O+X16s2GtKUpsNAmWg@mail.gmail.com' \
--to=dendari92@gmail.com \
--cc=cake@lists.bufferbloat.net \
--cc=moeller0@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox