Hello, thanks for your reply.

Looks like most of your options are okay, including the correct “dual” modes and “ingress” mode in the right place. However, I think you need to adjust your bandwidth and overhead settings, otherwise Cake isn’t reliably in control of the bottleneck queues. Try these to begin with:

… bandwidth 850Kbit conservative dual-srchost nat

… bandwidth 15Mbit conservative dual-dsthost nat ingress

That should give you correct operation, and you can fine-tune from there.

Just did quick test with your settings. First thing I noticed is my final download bandwidth is about 12Mbps, Steam on PC1 downloads at 1.4-1.5MB/s while downloading a file on PC2 seems to max out at ~250KB/s. From my understanding I should see each PC download at ~700KB/s, or am I mistaken?

On 20 April 2017 at 17:32, Jonathan Morton <chromatix99@gmail.com> wrote:

> On 20 Apr, 2017, at 18:23, Dendari Marini <dendari92@gmail.com> wrote:
>
> > Could you post the output of calling “tc -s qdisc” here on the list please? That should allow to figure out what you actually told cake to do ;0

> qdisc cake 8001: dev eth0 root refcnt 2 bandwidth 900Kbit diffserv3 dual-srchost nat rtt 100.0ms raw

> qdisc cake 8002: dev ifb4eth0 root refcnt 2 bandwidth 16Mbit diffserv3 dual-dsthost nat ingress rtt 100.0ms raw

Looks like most of your options are okay, including the correct “dual” modes and “ingress” mode in the right place. However, I think you need to adjust your bandwidth and overhead settings, otherwise Cake isn’t reliably in control of the bottleneck queues. Try these to begin with:

… bandwidth 850Kbit conservative dual-srchost nat

… bandwidth 15Mbit conservative dual-dsthost nat ingress

That should give you correct operation, and you can fine-tune from there.

- Jonathan Morton