From: Pete Heist <pete@heistp.net>
To: Georgios Amanakis <gamanakis@gmail.com>
Cc: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>,
Cake List <cake@lists.bufferbloat.net>
Subject: Re: [Cake] Cake on openwrt - falling behind
Date: Sat, 30 Jun 2018 23:37:48 +0200 [thread overview]
Message-ID: <CCF53740-8460-48A0-AAAF-18B637D8339E@heistp.net> (raw)
In-Reply-To: <CACvFP_iwPA-vx7PXrZRv27dHrvFMv7giP=VsA-=K2=dtog0R0A@mail.gmail.com>
> On Jun 30, 2018, at 10:58 PM, Georgios Amanakis <gamanakis@gmail.com> wrote:
>
> Usually this is what I do, too. You have to install the base openwrt image you just compiled and then install the two ipks. Otherwise if you go with some other precompiled base image it throws dependency errors.
>
> Did you install the base image you just compiled?
Yes, installed the one that was built into bin/targets/ar71xx/generic:
OpenWrt SNAPSHOT, r7360-e15565a01c
It's the sysupgrade image for OM2P, then I used sysupgrade to install as I’ve done with release builds.
Also not sure if I applied the patches right. I just copied them into the right package directory, but now I’m reading about quilt, if I should have installed them some proper way.
next prev parent reply other threads:[~2018-06-30 21:37 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <mailman.381.1530347349.3512.cake@lists.bufferbloat.net>
2018-06-30 16:37 ` Georgios Amanakis
2018-06-30 17:26 ` Pete Heist
2018-06-30 18:09 ` Georgios Amanakis
2018-06-30 18:55 ` Kevin Darbyshire-Bryant
2018-06-30 19:57 ` Pete Heist
2018-06-30 20:58 ` Georgios Amanakis
2018-06-30 21:37 ` Pete Heist [this message]
2018-06-30 22:43 ` Pete Heist
2018-06-30 23:20 ` Pete Heist
[not found] ` <CACvFP_gkdAPKSEO7j9+cMPqTa-fJYd8XFEEBD6ZzLuVvaNwsvg@mail.gmail.com>
2018-07-01 2:37 ` [Cake] Fwd: " Georgios Amanakis
2018-07-01 7:18 ` [Cake] " Pete Heist
2018-07-01 13:48 ` Pete Heist
2018-07-01 14:02 ` Dave Taht
2018-07-01 15:30 ` Pete Heist
2018-07-01 14:38 ` Kevin Darbyshire-Bryant
2018-07-01 16:54 ` Pete Heist
2018-07-01 19:41 ` Kevin Darbyshire-Bryant
2018-07-02 10:19 ` Pete Heist
2018-07-02 11:38 ` Pete Heist
2018-07-02 11:59 ` Kevin Darbyshire-Bryant
2018-07-02 14:01 ` Pete Heist
2018-07-02 12:03 ` Toke Høiland-Jørgensen
2018-07-02 14:51 ` Pete Heist
2018-07-02 16:14 ` Toke Høiland-Jørgensen
2018-07-02 16:59 ` Kevin Darbyshire-Bryant
2018-07-02 17:04 ` Pete Heist
2018-07-02 17:12 ` Kevin Darbyshire-Bryant
2018-07-02 18:24 ` Pete Heist
2018-07-02 19:31 ` Toke Høiland-Jørgensen
2018-07-02 20:09 ` Pete Heist
2018-07-02 20:11 ` Toke Høiland-Jørgensen
2018-07-02 20:46 ` Pete Heist
[not found] ` <mailman.407.1530550780.3512.cake@lists.bufferbloat.net>
2018-07-02 17:50 ` Kevin Darbyshire-Bryant
2018-07-02 19:33 ` Toke Høiland-Jørgensen
2018-07-02 19:36 ` Kevin Darbyshire-Bryant
2018-07-02 19:39 ` Toke Høiland-Jørgensen
2018-07-02 20:03 ` [Cake] cake at 60gbit Dave Taht
2018-07-02 20:09 ` Toke Høiland-Jørgensen
2018-07-02 21:16 ` Pete Heist
2018-07-02 21:35 ` Toke Høiland-Jørgensen
2018-07-02 22:07 ` Georgios Amanakis
2018-07-02 22:12 ` Dave Taht
2018-07-02 23:48 ` Georgios Amanakis
2018-07-02 22:23 ` Toke Høiland-Jørgensen
2018-07-03 7:35 ` Pete Heist
2018-07-03 9:18 ` Jonathan Morton
2018-07-03 9:57 ` Pete Heist
2018-07-03 10:27 ` Toke Høiland-Jørgensen
2018-07-03 10:41 ` Pete Heist
2018-07-05 22:31 ` Toke Høiland-Jørgensen
2018-07-05 23:48 ` Georgios Amanakis
2018-07-06 1:21 ` Dave Taht
2018-07-06 2:55 ` George Amanakis
2018-07-06 3:06 ` George Amanakis
2018-07-06 9:22 ` Toke Høiland-Jørgensen
2018-07-06 9:21 ` Toke Høiland-Jørgensen
2018-07-06 8:55 ` Pete Heist
2018-07-06 9:29 ` Toke Høiland-Jørgensen
2018-07-06 10:00 ` Pete Heist
2018-07-06 10:46 ` Toke Høiland-Jørgensen
2018-07-06 11:33 ` Toke Høiland-Jørgensen
2018-07-06 11:43 ` Jonathan Morton
2018-07-06 11:48 ` Toke Høiland-Jørgensen
2018-07-06 11:58 ` Pete Heist
2018-07-06 12:04 ` Toke Høiland-Jørgensen
2018-07-02 18:39 ` [Cake] Cake on openwrt - falling behind Dave Taht
2018-07-02 19:11 ` Kevin Darbyshire-Bryant
2018-07-02 19:23 ` Toke Høiland-Jørgensen
2018-07-02 19:27 ` Dave Taht
2018-07-02 19:38 ` Toke Høiland-Jørgensen
2018-07-02 20:05 ` Toke Høiland-Jørgensen
2018-07-02 19:31 ` Pete Heist
[not found] ` <mailman.397.1530474091.3512.cake@lists.bufferbloat.net>
2018-07-01 23:55 ` Dave Taht
2018-07-02 0:05 ` Dave Taht
[not found] ` <mailman.392.1530455913.3512.cake@lists.bufferbloat.net>
2018-07-01 15:17 ` Jonathan Morton
[not found] ` <mailman.384.1530384918.3512.cake@lists.bufferbloat.net>
2018-07-01 9:46 ` Magnus Olsson
2018-07-01 12:34 ` Kevin Darbyshire-Bryant
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/cake.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CCF53740-8460-48A0-AAAF-18B637D8339E@heistp.net \
--to=pete@heistp.net \
--cc=cake@lists.bufferbloat.net \
--cc=gamanakis@gmail.com \
--cc=kevin@darbyshire-bryant.me.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox