From: Pete Heist <pete@heistp.net>
To: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Cc: Cake List <cake@lists.bufferbloat.net>
Subject: Re: [Cake] Cake on openwrt - falling behind
Date: Sun, 1 Jul 2018 18:54:46 +0200 [thread overview]
Message-ID: <DD0F4A27-F63A-4CB2-889E-9AF94C963A27@heistp.net> (raw)
In-Reply-To: <94C9790F-E9BC-4D59-9845-17C305E4B910@darbyshire-bryant.me.uk>
[-- Attachment #1: Type: text/plain, Size: 1275 bytes --]
> On Jul 1, 2018, at 4:38 PM, Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> wrote:
>
> I haven’t looked yet to see if working archs define ‘CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS’ and non working archs don’t….but to me it’s an obvious place to start poking, as we clearly have some/most archs wher the iproute/tc & cake code talk well….and one arch where they don’t…. to me that sort of rules out tc/cake doing anything silly.
I tried a hail mary and compiled with CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y, but didn’t see a change. Don’t take that for 100% because CONFIG_IKCONFIG_PROC wasn’t set when I went so I can’t prove it’s actually set. Anyway, I’ll probably get back to narrowing down a few basics so I understand it better.
> There’s a ‘kmon-nlmon’ that allows you to create a virtual network interface for the netlink packets and thus capture (tcpdump) and export to wireshark for dissection. I had a look at that a few weeks ago but my head exploded and have only just recovered enough to start looking at this problem again….
Cool, I might eventually get to that point. My head also approached some thermal limits last night with this unfamiliar build system but it’s getting a little better… :)
[-- Attachment #2: Type: text/html, Size: 2903 bytes --]
next prev parent reply other threads:[~2018-07-01 16:54 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <mailman.381.1530347349.3512.cake@lists.bufferbloat.net>
2018-06-30 16:37 ` Georgios Amanakis
2018-06-30 17:26 ` Pete Heist
2018-06-30 18:09 ` Georgios Amanakis
2018-06-30 18:55 ` Kevin Darbyshire-Bryant
2018-06-30 19:57 ` Pete Heist
2018-06-30 20:58 ` Georgios Amanakis
2018-06-30 21:37 ` Pete Heist
2018-06-30 22:43 ` Pete Heist
2018-06-30 23:20 ` Pete Heist
[not found] ` <CACvFP_gkdAPKSEO7j9+cMPqTa-fJYd8XFEEBD6ZzLuVvaNwsvg@mail.gmail.com>
2018-07-01 2:37 ` [Cake] Fwd: " Georgios Amanakis
2018-07-01 7:18 ` [Cake] " Pete Heist
2018-07-01 13:48 ` Pete Heist
2018-07-01 14:02 ` Dave Taht
2018-07-01 15:30 ` Pete Heist
2018-07-01 14:38 ` Kevin Darbyshire-Bryant
2018-07-01 16:54 ` Pete Heist [this message]
2018-07-01 19:41 ` Kevin Darbyshire-Bryant
2018-07-02 10:19 ` Pete Heist
2018-07-02 11:38 ` Pete Heist
2018-07-02 11:59 ` Kevin Darbyshire-Bryant
2018-07-02 14:01 ` Pete Heist
2018-07-02 12:03 ` Toke Høiland-Jørgensen
2018-07-02 14:51 ` Pete Heist
2018-07-02 16:14 ` Toke Høiland-Jørgensen
2018-07-02 16:59 ` Kevin Darbyshire-Bryant
2018-07-02 17:04 ` Pete Heist
2018-07-02 17:12 ` Kevin Darbyshire-Bryant
2018-07-02 18:24 ` Pete Heist
2018-07-02 19:31 ` Toke Høiland-Jørgensen
2018-07-02 20:09 ` Pete Heist
2018-07-02 20:11 ` Toke Høiland-Jørgensen
2018-07-02 20:46 ` Pete Heist
[not found] ` <mailman.407.1530550780.3512.cake@lists.bufferbloat.net>
2018-07-02 17:50 ` Kevin Darbyshire-Bryant
2018-07-02 19:33 ` Toke Høiland-Jørgensen
2018-07-02 19:36 ` Kevin Darbyshire-Bryant
2018-07-02 19:39 ` Toke Høiland-Jørgensen
2018-07-02 20:03 ` [Cake] cake at 60gbit Dave Taht
2018-07-02 20:09 ` Toke Høiland-Jørgensen
2018-07-02 21:16 ` Pete Heist
2018-07-02 21:35 ` Toke Høiland-Jørgensen
2018-07-02 22:07 ` Georgios Amanakis
2018-07-02 22:12 ` Dave Taht
2018-07-02 23:48 ` Georgios Amanakis
2018-07-02 22:23 ` Toke Høiland-Jørgensen
2018-07-03 7:35 ` Pete Heist
2018-07-03 9:18 ` Jonathan Morton
2018-07-03 9:57 ` Pete Heist
2018-07-03 10:27 ` Toke Høiland-Jørgensen
2018-07-03 10:41 ` Pete Heist
2018-07-05 22:31 ` Toke Høiland-Jørgensen
2018-07-05 23:48 ` Georgios Amanakis
2018-07-06 1:21 ` Dave Taht
2018-07-06 2:55 ` George Amanakis
2018-07-06 3:06 ` George Amanakis
2018-07-06 9:22 ` Toke Høiland-Jørgensen
2018-07-06 9:21 ` Toke Høiland-Jørgensen
2018-07-06 8:55 ` Pete Heist
2018-07-06 9:29 ` Toke Høiland-Jørgensen
2018-07-06 10:00 ` Pete Heist
2018-07-06 10:46 ` Toke Høiland-Jørgensen
2018-07-06 11:33 ` Toke Høiland-Jørgensen
2018-07-06 11:43 ` Jonathan Morton
2018-07-06 11:48 ` Toke Høiland-Jørgensen
2018-07-06 11:58 ` Pete Heist
2018-07-06 12:04 ` Toke Høiland-Jørgensen
2018-07-02 18:39 ` [Cake] Cake on openwrt - falling behind Dave Taht
2018-07-02 19:11 ` Kevin Darbyshire-Bryant
2018-07-02 19:23 ` Toke Høiland-Jørgensen
2018-07-02 19:27 ` Dave Taht
2018-07-02 19:38 ` Toke Høiland-Jørgensen
2018-07-02 20:05 ` Toke Høiland-Jørgensen
2018-07-02 19:31 ` Pete Heist
[not found] ` <mailman.397.1530474091.3512.cake@lists.bufferbloat.net>
2018-07-01 23:55 ` Dave Taht
2018-07-02 0:05 ` Dave Taht
[not found] ` <mailman.392.1530455913.3512.cake@lists.bufferbloat.net>
2018-07-01 15:17 ` Jonathan Morton
[not found] ` <mailman.384.1530384918.3512.cake@lists.bufferbloat.net>
2018-07-01 9:46 ` Magnus Olsson
2018-07-01 12:34 ` Kevin Darbyshire-Bryant
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/cake.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DD0F4A27-F63A-4CB2-889E-9AF94C963A27@heistp.net \
--to=pete@heistp.net \
--cc=cake@lists.bufferbloat.net \
--cc=kevin@darbyshire-bryant.me.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox