Re: [Cerowrt-devel] bql-37 is out - field report

Re: [Cerowrt-devel] bql-37 is out - field report

[Richard Brown]

[-- Attachment #1: Type: text/plain, Size: 691 bytes --]

Dave,

Congratulations. I installed on my spare router last night and have a couple observations:

The only tremendously user visible change is that
multicast dns worked out so well that it's enabled
by default on all interfaces except the default gw.

Success! I was able to talk to my mDNS printer from other non-secure networks. I did not test secure networks.

...
While there has a been a lot else changed 'under the hood', most
of the new-est pieces are still flying in loose formation.

That said, this seems stable enough for day to day use
as a secondary router. I need to write up a bit more
doc on how to do that well.

Excellent! I look forward to it.

Rich

[-- Attachment #2: Type: text/html, Size: 2120 bytes --]

[Cerowrt-devel] Scripting CeroWrt config

[Richard Brown]

Folks,

I make a number of changes to the router each time I install new firmware. Specifically:

- I install the snmpd and fprobe packages
- I start and enable snmpd
- I configure fprobe to send data to my InterMapper server for monitoring, and add that command to the startup script
- At some point, I may want to change from 172.30.42.x addresses to my "normal" network address range (192.168.2.x).

What's the best way to script this? I'm quite content to paste in a set of commands over ssh, but wonder if there's another way... (Would save/restore do all this?)

Thanks!

Rich

Re: [Cerowrt-devel] Scripting CeroWrt config

[Dave Taht]

On Thu, Feb 9, 2012 at 11:25 PM, Richard Brown
<richard.e.brown@dartware.com> wrote:
> Folks,
>
> I make a number of changes to the router each time I install new firmware. Specifically:
>
> - I install the snmpd and fprobe packages
> - I start and enable snmpd
> - I configure fprobe to send data to my InterMapper server for monitoring, and add that command to the startup script
> - At some point, I may want to change from 172.30.42.x addresses to my "normal" network address range (192.168.2.x).

I have a similar need to script things better. The uci interface can
be quite cool.
I would suggest playing with that.

example:

uci show network

There is decent doc on that on the openwrt web site.

>
> What's the best way to script this?

#!/bin/sh

opkg update
opkg install snmpd fprobe
sed -i s/172.30.42/192.168.2/g /etc/config/* /etc/babeld.conf (etc -
the full string is on the wiki)

# etc, etc

# and wip for me...
opkg install ipv6policy
net=`generate-rfc4193-addr se00`
parse_network_somehow
get a string of useful networks
uci set network.se00.ip6addr=whatever/64
uci set network.sw00.ip6addr=whatever/64
stick in dns somehow

etc. the ash shell is quite limited so I'd suggest developing your
script on the box.


>I'm quite content to paste in a set of commands over ssh, but wonder if there's another way... (Would save/restore do all this?)

I'm not, and I agree, this gets very tedious after a while.
I'm very glad I use a routing protocol, because keeping
bloatlab #1 operational without it is nearly impossible.

(as it is, I reflash one box, wait for it to appear anew,
 change everything, reboot it, do another one)

and for all that I've 'lost' 2 of the 8 boxes on that network
(in california) and don't know which ones they are!!

save/restore is unlikely to be a good idea at this point. Too much
stuff changing.

What I do for my much more complex configurations (includes ipv6
and I'd like very much to make it more generic)

i snarf a copy of the default config via scp to my main machine
check all that in git
make the 'perfect' configuration
check all those changes into git

build a new box
snarf it
do diffs...


I'm also working on a generic set of testbed tools for
creating ipv6 ula addresses and getting them into dns.



>
> Thanks!
>
> Rich
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel



-- 
Dave Täht
SKYPE: davetaht
US Tel: 1-239-829-5608
FR Tel: 0638645374
http://www.bufferbloat.net