[Cerowrt-devel] cerowrt-3.10.24-7 "North Pole" development release available

[Cerowrt-devel] cerowrt-3.10.24-7 "North Pole" development release available

[Dave Taht]

+ latest "AQM" code (thx Sebastian!)
+ fix for the major kernel trap (thx Robert!)
+ babels src routing support by default (thx Matthieu & babel team!)
+ dnsmasq reload fixes (thx jow!)
+ resync with openwrt (thx #openwrt)
+ Fix for WMM mode in wifi (old patch accidentally dropped)
+ quagga still available as a separate package

- untested as a whole (only in pieces)
- There may be more kernel traps lurking
- babels doesn't redistribute /27s for some reason (and there is no src
specific routing support in the scripts as yet, either)
- I chickened out and didn't remove the dnsmasq restart from rc.local
- Still working on ipv6  stuff (I did test a HE tunnel, which, after
  disabling 6relayd and uncommenting everything in /etc/dnsmasq.conf
  "just worked")

Get it at:

http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.24-7/

But I expect I'll get another one out before the new year.

I'd like to settle on some name to replace "AQM" over the holiday.

-- 
Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html

Re: [Cerowrt-devel] cerowrt-3.10.24-7 "North Pole" development release available

[Dave Taht]

I installed this remotely to the yurtlab and the box didn't magically
reappear. Be cautious with this.

I'll be stopping in there tomorrow (monday)

On Sun, Dec 22, 2013 at 8:46 PM, Dave Taht <dave.taht@gmail.com> wrote:
> + latest "AQM" code (thx Sebastian!)
> + fix for the major kernel trap (thx Robert!)
> + babels src routing support by default (thx Matthieu & babel team!)
> + dnsmasq reload fixes (thx jow!)
> + resync with openwrt (thx #openwrt)
> + Fix for WMM mode in wifi (old patch accidentally dropped)
> + quagga still available as a separate package
>
> - untested as a whole (only in pieces)
> - There may be more kernel traps lurking
> - babels doesn't redistribute /27s for some reason (and there is no src
> specific routing support in the scripts as yet, either)
> - I chickened out and didn't remove the dnsmasq restart from rc.local
> - Still working on ipv6  stuff (I did test a HE tunnel, which, after
>   disabling 6relayd and uncommenting everything in /etc/dnsmasq.conf
>   "just worked")
>
> Get it at:
>
> http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.24-7/
>
> But I expect I'll get another one out before the new year.
>
> I'd like to settle on some name to replace "AQM" over the holiday.
>
> --
> Dave Täht
>
> Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html



-- 
Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html

Re: [Cerowrt-devel] cerowrt-3.10.24-7 "North Pole" development release available

[Toke Høiland-Jørgensen]

[-- Attachment #1: Type: text/plain, Size: 206 bytes --]

Dave Taht <dave.taht@gmail.com> writes:

> Get it at:
>
> http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.24-7/

Did you push the updated source to Github? I see new-ish code but no tags?

-Toke

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 489 bytes --]

Re: [Cerowrt-devel] cerowrt-3.10.24-7 "North Pole" development release available

[Rich Brown]

Dave,

>  installed this remotely to the yurtlab and the box didn't magically
> reappear. Be cautious with this.
> 
> I'll be stopping in there tomorrow (monday)

I can confirm a problem.I installed 3.10.24-7 on my WNDR3800 secondary router (hoping to get screen shots for the AQM GUI). It doesn’t seem to be responding, even after waiting ~15 minutes after the TFTP upgrade.

The lights look normal-ish on the front panel (although I don’t usually look at it so can’t say for sure). I cannot get a DHCP address on the Ethernet LAN interface, and when I configure my laptop’s Ethernet for 172.30.42.2, I can’t ping it the router.

I also tried power cycling the router. Same results.  Wireshark doesn’t show any data coming out of the router on the Ethernet.

Back to 3.10.24-5.

Rich

Re: [Cerowrt-devel] cerowrt-3.10.24-7 "North Pole" development release available

[Dave Taht]

ok, I moved that build to a "bad" subdir. Sorry, looks like santa
drank too much eggnog over the weekend.



On Mon, Dec 23, 2013 at 5:26 AM, Rich Brown <richb.hanover@gmail.com> wrote:
> Dave,
>
>>  installed this remotely to the yurtlab and the box didn't magically
>> reappear. Be cautious with this.
>>
>> I'll be stopping in there tomorrow (monday)
>
> I can confirm a problem.I installed 3.10.24-7 on my WNDR3800 secondary router (hoping to get screen shots for the AQM GUI). It doesn’t seem to be responding, even after waiting ~15 minutes after the TFTP upgrade.
>
> The lights look normal-ish on the front panel (although I don’t usually look at it so can’t say for sure). I cannot get a DHCP address on the Ethernet LAN interface, and when I configure my laptop’s Ethernet for 172.30.42.2, I can’t ping it the router.
>
> I also tried power cycling the router. Same results.  Wireshark doesn’t show any data coming out of the router on the Ethernet.
>
> Back to 3.10.24-5.
>
> Rich



-- 
Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html