A race condition appears to have crept in...
---------- Forwarded message ----------
From: "Dave Taht" <dave.taht@gmail.com>
Date: Dec 27, 2013 10:47 AM
Subject: Re: [Cerowrt-devel] CeroWrt 3.10.24-8 badly bloated?
To: "Richard E. Brown" <richb.hanover@gmail.com>
Cc:

Probably didn't start sqm properly

Restart it by hand via /etc/init.d/sqm restart

tc -s qdisc show dev ge00

Should show htb and fq codel.
On Dec 27, 2013 10:36 AM, "Rich Brown" <richb.hanover@gmail.com> wrote:

> So I screwed up my courage and replaced my 3.10.18-? firmware in my
> primary router with 3.10.24-8. That version had worked well as a secondary,
> so I figured, What the heck… Let’s give it try.
>
> The result was not pretty. I set my link speeds in the SQM page, chose the
> defaults for the Queue Discipline tab, and link layer to ATM with no
> additional overhead for my DSL link.
>
> Ping times to google are normally ~51-54 msec. But when I fired up
> speedtest.net, they jumped to 1500-2500 msec. Is there something I should
> look at before reverting? Thanks.
>
> Rich
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>