From: Arthur LENA <arthur@lena.im>
Date: Mon, Aug 3, 2015 at 9:07 PM
Subject: [Battlemesh] BSS load element patch
To: battlemesh@ml.ninux.org
Hi all!
Attached the patch adding the BSS Load IE to the beacon sent by the ath9k driver (specification can be found @ IEEE802.11-2012 §8.4.2.30). It fills the channel utilization field (based on cycles counters read out of the chipsets) and the station count field. This patch applies successfully to the compat-wireless package in the OpenWRT build environment (trunk r45674) and was tested on the WDR4300. All comments are welcome!!
Cheers
Arthur
Attached the patch adding the BSS Load IE to the beacon sent by the ath9k driver (specification can be found @ IEEE802.11-2012 §8.4.2.30). It fills the channel utilization field (based on cycles counters read out of the chipsets) and the station count field. This patch applies successfully to the compat-wireless package in the OpenWRT build environment (trunk r45674) and was tested on the WDR4300. All comments are welcome!!
Cheers
Arthur
_______________________________________________
Battlemesh mailing list
Battlemesh@ml.ninux.org
http://ml.ninux.org/mailman/listinfo/battlemesh