From: Dave Taht <dave.taht@gmail.com>
To: Alijah Ballard <alijahb@gmail.com>
Cc: cerowrt-devel@lists.bufferbloat.net
Subject: Re: [Cerowrt-devel] Forward between wired and wireless devices
Date: Tue, 30 Apr 2013 08:36:48 -0700 [thread overview]
Message-ID: <CAA93jw4C+YqUvUkereeQN0_4=v4n1y4JT1b=7E4P3E7fh4dG6A@mail.gmail.com> (raw)
In-Reply-To: <CAOGcCtBDYuSyeK78Cdsphv5wNz0tqwLivtuut5Ogc4ZYCd5LFA@mail.gmail.com>
cerowrt feels less buggy than the rest of the internet at this point.
It wasn't always that way!
On Tue, Apr 30, 2013 at 8:26 AM, Alijah Ballard <alijahb@gmail.com> wrote:
> Okay, I think i have found a clue.
>
> I swapped the os sd card. I was running the xbmc raspi os(it is to be a set
> top box). I put in the dev sd card with raspi debian, so i can install
> babeld. And ssh was working again.
>
> damn
>
> seems the issue is rasbmc ssh client
>
> thanks for the help
> Alijah
>
>
> On Tue, Apr 30, 2013 at 9:09 AM, Alijah Ballard <alijahb@gmail.com> wrote:
>>
>> Sorry, the second email was with my laptop directly connected by Ethernet.
>> If both devices are on the same segment (ie, eth, 2.4, 5) I can SSH just
>> fine. I might try SSH into router then out to raspi.
>>
>> On Apr 30, 2013 9:05 AM, "Dave Taht" <dave.taht@gmail.com> wrote:
>>>
>>> Huh? These two boxes should be able to reach each other, they are on
>>> the same lan. They don't?
>>>
>>> you sure you have openssh installed and no fws on the boxes?
>>> openssh-server is not installed by default on ubuntu...
>>>
>>> sake of argument, try installing babeld
>>>
>>> On Tue, Apr 30, 2013 at 6:58 AM, Alijah Ballard <alijahb@gmail.com>
>>> wrote:
>>> > rockape@CavePC:~$ route
>>> > Kernel IP routing table
>>> > Destination Gateway Genmask Flags Metric Ref Use
>>> > Iface
>>> > rockape@CavePC:~$
>>> >
>>> > pi@raspbmc:~$ route
>>> > Kernel IP routing table
>>> > Destination Gateway Genmask Flags Metric Ref Use
>>> > Iface
>>> > pi@raspbmc:~$
>>> >
>>> >
>>> >
>>> > On Tue, Apr 30, 2013 at 8:54 AM, Alijah Ballard <alijahb@gmail.com>
>>> > wrote:
>>> >>
>>> >> It will take a bit to get to the raspi. Its in the living room and I
>>> >> need
>>> >> a hard wire connection to connect.
>>> >>
>>> >> One bit.
>>> >>
>>> >> Alijah
>>> >>
>>> >>
>>> >> On Tue, Apr 30, 2013 at 8:52 AM, Dave Taht <dave.taht@gmail.com>
>>> >> wrote:
>>> >>>
>>> >>> well, this stuff works, I use it all the time, so there's a problem
>>> >>> elsewhere.
>>> >>>
>>> >>> what's the other box's routing table?
>>> >>>
>>> >>> On Tue, Apr 30, 2013 at 6:51 AM, Alijah Ballard <alijahb@gmail.com>
>>> >>> wrote:
>>> >>> > Clean install
>>> >>> >
>>> >>> >
>>> >>> > On Tue, Apr 30, 2013 at 8:50 AM, Dave Taht <dave.taht@gmail.com>
>>> >>> > wrote:
>>> >>> >>
>>> >>> >> just out of curiousity, did you do a clean install of the
>>> >>> >> firmware, or
>>> >>> >> try to preserve original settings?
>>> >>> >>
>>> >>> >> On Mon, Apr 29, 2013 at 7:00 PM, Alijah Ballard
>>> >>> >> <alijahb@gmail.com>
>>> >>> >> wrote:
>>> >>> >> > I have a basic setup. Two laptops, a tower in the closet, and a
>>> >>> >> > raspi as
>>> >>> >> > a
>>> >>> >> > setop box. The raspi is a recent purchase It is directly
>>> >>> >> > connected
>>> >>> >> > to
>>> >>> >> > my
>>> >>> >> > 3800 running CeroWrt Modena 3.7.5-2. I can only connect to other
>>> >>> >> > machines
>>> >>> >> > that are simultaneously on a particular interface. Like the
>>> >>> >> > laptops
>>> >>> >> > on
>>> >>> >> > 2.4
>>> >>> >> > ghz can file share, but can not see the tower on 5 ghz. I really
>>> >>> >> > need to
>>> >>> >> > ssh
>>> >>> >> > into the raspi on eth from 2.4 ghz or 5 ghz. I reinstalled the
>>> >>> >> > firmware,
>>> >>> >> > and
>>> >>> >> > also reset the setting from the system menu.
>>> >>> >> >
>>> >>> >> > In other news this has greatly improved skype and youtube.
>>> >>> >> >
>>> >>> >> > Thanks
>>> >>> >> > Alijah
>>> >>> >> >
>>> >>> >> > _______________________________________________
>>> >>> >> > Cerowrt-devel mailing list
>>> >>> >> > Cerowrt-devel@lists.bufferbloat.net
>>> >>> >> > https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>> >>> >> >
>>> >>> >>
>>> >>> >>
>>> >>> >>
>>> >>> >> --
>>> >>> >> Dave Täht
>>> >>> >>
>>> >>> >> Fixing bufferbloat with cerowrt:
>>> >>> >> http://www.teklibre.com/cerowrt/subscribe.html
>>> >>> >
>>> >>> >
>>> >>>
>>> >>>
>>> >>>
>>> >>> --
>>> >>> Dave Täht
>>> >>>
>>> >>> Fixing bufferbloat with cerowrt:
>>> >>> http://www.teklibre.com/cerowrt/subscribe.html
>>> >>
>>> >>
>>> >
>>>
>>>
>>>
>>> --
>>> Dave Täht
>>>
>>> Fixing bufferbloat with cerowrt:
>>> http://www.teklibre.com/cerowrt/subscribe.html
>
>
--
Dave Täht
Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html
next prev parent reply other threads:[~2013-04-30 15:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-30 2:00 Alijah Ballard
2013-04-30 7:58 ` Dave Taht
[not found] ` <CAA93jw5FA4K6Xj7PD+spE_WcsVzZqkUs1m3YmSCd8fKV43-rzA@mail.gmail.com>
[not found] ` <CAOGcCtBBTv0ass78055_m2=UviJTFD75eXGyhy=jOT_zU+oX4w@mail.gmail.com>
[not found] ` <CAA93jw6s5yAo-V+f3=Yqjzbn8c60FcF5LLxYa1B015ibG6tsJQ@mail.gmail.com>
[not found] ` <CAOGcCtAMgG-GtYPnbsv0j+RnObLw6rVjbp17kJ4HE3G755nznQ@mail.gmail.com>
[not found] ` <CAOGcCtA+Ek+GwqWUfvCsrmZiP=gjdRZsGxeqCsLBxLbTqZ6miQ@mail.gmail.com>
2013-04-30 13:47 ` Dave Taht
[not found] ` <CAA93jw5Zsx3aCbw_JJQX=DoLE36SmW0pp4=z_afqiji3Qp_SFA@mail.gmail.com>
[not found] ` <CAOGcCtDLkH=wDJKuNisEZWHdBGFfpMrSTRiDmqT65BVqkOvZ3w@mail.gmail.com>
[not found] ` <CAA93jw6fJWQDa7tkLWcN-o3n_gwksdO8q+DGa1dqyt410cWWgw@mail.gmail.com>
[not found] ` <CAOGcCtA8qjU7OSo-rjtB_ORuxrSHpJjS9iga1s4oS6AMgZnixQ@mail.gmail.com>
[not found] ` <CAOGcCtD-VDtMU+gBZtTtF_=_6-onmBmnB9gfEJSYNJFaA2haTg@mail.gmail.com>
[not found] ` <CAA93jw4O0PY1eCqLZovvQknwN-tp_XrOyZ1OeucyP3mpTSjj+w@mail.gmail.com>
[not found] ` <CAOGcCtCr_POqQcGUigvYKn3ebyjvbgzXcwhKx6N9DTewScY1Og@mail.gmail.com>
2013-04-30 15:26 ` Alijah Ballard
2013-04-30 15:36 ` Dave Taht [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-03-16 0:27 Kai Yang
2013-03-16 0:29 ` Dave Taht
[not found] ` <CADgGS_sM5az7N5RMKvM7UaxWOPgoanYtZCxyV5LNtg36DGfN0w@mail.gmail.com>
[not found] ` <CAA93jw7o_vACAVmbCnCzvMNSSOyVuK2iFkEWEGnu5T71SAJ6Qw@mail.gmail.com>
[not found] ` <CADgGS_sBj66dkSuQNURbS87WCW9qgQ-Z3m2DVbAXM4RNRbVbLQ@mail.gmail.com>
[not found] ` <CAA93jw7o+YMysnqanPyDnQRiZLU--TsNoNMGUa-Z23LFc39pEw@mail.gmail.com>
[not found] ` <CADgGS_sY35+ttkbnT_yTNXXHwcnQL_kqgUx2Emh7tDcVCFc_dg@mail.gmail.com>
[not found] ` <CAA93jw6L1VAPeEeEF_Cvp_+wGd4mCgo8LW_TG+T_M4x=Mnoyvg@mail.gmail.com>
2013-03-16 3:11 ` Kai Yang
2013-03-16 0:50 ` Dave Taht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/cerowrt-devel.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAA93jw4C+YqUvUkereeQN0_4=v4n1y4JT1b=7E4P3E7fh4dG6A@mail.gmail.com' \
--to=dave.taht@gmail.com \
--cc=alijahb@gmail.com \
--cc=cerowrt-devel@lists.bufferbloat.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox