* [Cerowrt-devel] tuning up the ath10k in the ubnt products
2020-03-30 15:33 ` Dave Taht
@ 2020-03-30 16:17 ` Dave Taht
2020-03-30 18:19 ` [Cerowrt-devel] ath10k test of openwrt head Dave Taht
1 sibling, 0 replies; 6+ messages in thread
From: Dave Taht @ 2020-03-30 16:17 UTC (permalink / raw)
To: Toke Høiland-Jørgensen; +Cc: cerowrt-devel, Make-Wifi-fast
As debris from the original project, I had a half dozen ubnt mesh
(pro, lite, mesh) boxes, "bricked", and I'd felt at the time the only
way to bring them back to life was to solder a header onto each and
recreate them via the serial port. I'd disassembled a bunch but my
tired old eyes wouldn't let me get the dang pins back on easily.
It turns out that the "reflash the OEM firmware" method, "just
works". (see near the bottom of:
https://openwrt.org/toh/ubiquiti/unifiac ) -
w00t! now that the basic AQL support has landed (yesterday) for the
ath10k-ct in openwrt I was kind of inspired to do a build of my own,
folding back in things I cared about that aren't in the default build
(babel, dnsmasq-dnssec).
The PTSD from all that time "having to build the donuts'... barely had
time to kick in. time for some comparative benchmarks!
and who knows? perhaps I'll (we'll?) get around to
* cutting the codel target to something less on 5ghz
* Fiddling with sce and trying out the optimizations in fq_codel_fast
* Getting back on top of the iwl (specifically ax200) products
* poking into multi-core shaping
* etc (for a large value of etc. Has source specific ipv6 RA landed
anywhere yet? dns-sd?)
...
Elsewhere... Trying to get more ubnt edgerouter folk to try cake...
https://www.reddit.com/r/Ubiquiti/comments/fqmrxt/smart_queue_speed_setting/
https://www.reddit.com/r/HomeNetworking/comments/fp70rh/combatting_bufferbloat/
Thx lochnair for getting the build server back up
On Mon, Mar 30, 2020 at 8:33 AM Dave Taht <dave.taht@gmail.com> wrote:
>
> On Mon, Mar 30, 2020 at 3:35 AM Toke Høiland-Jørgensen <toke@toke.dk> wrote:
> >
> > Dave Taht <dave.taht@gmail.com> writes:
> >
> > > well, aqm is engaging, but waaay too late - 2-3 sec latencies on a
> > > given 10mbit wifi test.
> >
> > So this would be without AQL, right?
>
> Well I thought the code was in that build which is what triggered me
> to try. Turned out it landed a few hours later.
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=5c57d15aed3ed7fd5ed077833044660df52c1bf4
>
>
> hours later.
> >
> > -Toke
>
>
>
> --
> Make Music, Not War
>
> Dave Täht
> CTO, TekLibre, LLC
> http://www.teklibre.com
> Tel: 1-831-435-0729
--
Make Music, Not War
Dave Täht
CTO, TekLibre, LLC
http://www.teklibre.com
Tel: 1-831-435-0729
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Cerowrt-devel] ath10k test of openwrt head
2020-03-30 15:33 ` Dave Taht
2020-03-30 16:17 ` [Cerowrt-devel] tuning up the ath10k in the ubnt products Dave Taht
@ 2020-03-30 18:19 ` Dave Taht
2020-03-31 9:08 ` Toke Høiland-Jørgensen
1 sibling, 1 reply; 6+ messages in thread
From: Dave Taht @ 2020-03-30 18:19 UTC (permalink / raw)
To: Toke Høiland-Jørgensen; +Cc: cerowrt-devel
I just wanted to say I just tested that last openwrt patch... and it
was *beautiful*. I went from where
a load test could crack 3 seconds on the uap mesh router... and
disable the babel protocol, to 20ms....
/me wipes away tear of joy
On Mon, Mar 30, 2020 at 8:33 AM Dave Taht <dave.taht@gmail.com> wrote:
>
> On Mon, Mar 30, 2020 at 3:35 AM Toke Høiland-Jørgensen <toke@toke.dk> wrote:
> >
> > Dave Taht <dave.taht@gmail.com> writes:
> >
> > > well, aqm is engaging, but waaay too late - 2-3 sec latencies on a
> > > given 10mbit wifi test.
> >
> > So this would be without AQL, right?
>
> Well I thought the code was in that build which is what triggered me
> to try. Turned out it landed a few hours later.
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=5c57d15aed3ed7fd5ed077833044660df52c1bf4
>
>
> hours later.
> >
> > -Toke
>
>
>
> --
> Make Music, Not War
>
> Dave Täht
> CTO, TekLibre, LLC
> http://www.teklibre.com
> Tel: 1-831-435-0729
--
Make Music, Not War
Dave Täht
CTO, TekLibre, LLC
http://www.teklibre.com
Tel: 1-831-435-0729
^ permalink raw reply [flat|nested] 6+ messages in thread