* [Cerowrt-devel] Fwd: [LEDE-DEV] apu2 + Candela firmware/driver LEDE tree is available.
[not found] <5769C386.3080607@candelatech.com>
@ 2016-06-21 23:39 ` Dave Taht
0 siblings, 0 replies; only message in thread
From: Dave Taht @ 2016-06-21 23:39 UTC (permalink / raw)
To: cerowrt-devel
the apu2 has been my main target for a while. I am running ubuntu on
mine for ease of debugging, which required I put in a msata card and
fiddle a bit. I am not trying to make it a full fledged openwrt device
as yet...
... but ben just did (presumably can boot off a sdcard, which would be
cheaper than msata).
I am going to stop cross posting stuff from lede or to lede from now on, also.
---------- Forwarded message ----------
From: Ben Greear <greearb@candelatech.com>
Date: Tue, Jun 21, 2016 at 3:45 PM
Subject: [LEDE-DEV] apu2 + Candela firmware/driver LEDE tree is available.
To: LEDE Development List <lede-dev@lists.infradead.org>
In case someone wants to try out my patches by just cloning a tree:
https://github.com/greearb/lede-source-ct
The README has some notes on how to easily build for the 'apu2' platform,
and normal build infrastructure is supported as well.
I am likely to rebase this often as I have time to sync with upstream.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
--
Dave Täht
Let's go make home routers and wifi faster! With better software!
http://blog.cerowrt.org
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-06-21 23:39 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <5769C386.3080607@candelatech.com>
2016-06-21 23:39 ` [Cerowrt-devel] Fwd: [LEDE-DEV] apu2 + Candela firmware/driver LEDE tree is available Dave Taht
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox