Re: [Cerowrt-devel] routing

[Dave Taht <dave.taht@gmail.com>]

What I typically do (after renumbering each device to be on a unique
range, as you did),
is:

http://www.bufferbloat.net/projects/cerowrt/wiki/Setting_up_an_interior_gateway_router

There is no need to setup static routes at all, babel takes care of it.

You do have to tell your exterior router to export the default route,
as per a link on the above.


On Fri, Oct 24, 2014 at 6:29 AM, Dane Medic <dm70dm@gmail.com> wrote:
> Hi,
>
> question:
>
> if I use 3 cerowrt routers and connect them together from lan port to wan
> port in chain, is it correct way to set a static IP on the last two routers
> WAN ports and add routes from first one like so?
>
> route add -net 172.20.21.0 netmask 255.255.255.224 dev se00 gateway
> 172.20.21.5
> route add -net 172.20.21.64 netmask 255.255.255.224 dev se00 gateway
> 172.20.21.5
> route add -net 172.20.22.0 netmask 255.255.255.224 dev se00 gateway
> 172.20.21.5
> route add -net 172.20.22.64 netmask 255.255.255.224 dev se00 gateway
> 172.20.21.5
>
> or is there better solution? Do I have to set different route disatnce?
>
>
> Cheers,
>
> Dane
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>



-- 
Dave Täht

thttp://www.bufferbloat.net/projects/bloat/wiki/Upcoming_Talks