There are multiple threads on the stateless dhcp and dhcp implementation going on here: http://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2013q1/thread.html among other things, "enable-ra" should be getting set in the generated dnsmasq conf file and probably isn't right now. Perhaps it can be manually set? I'm hoping ipv6 support isn't mission critical for anyone? I really wasn't planning on A) breaking it, or B) fixing it - this week. I DO care about exercising the ipv6 portion of the stack a lot though, there are still a few new instruction traps left to kill in the kernel (see bug 419) (dhcpv6 support also has trouble - can't even assign the delegated prefix) On Fri, Jan 18, 2013 at 8:23 AM, Richard Brown wrote: > Dave, Maciej, > > On Jan 17, 2013, at 4:47 PM, > wrote: > > On Thu, Jan 17, 2013 at 1:45 PM, Maciej Soltysiak > wrote: > >> Hi, I configured he.net tunnel according to >> http://wiki.openwrt.org/doc/uci/network6 and works with latest 3.7.2-4. >> >> However I don't understand how my client is supposed get an ip6 address. >> radvd is gone and I don't see anything handing out me an ip6 addr. Who's >> job is it now then? >> > > dnsmasq is supposed to do the job now, but the configuration via openwrt's > config is in flux. There is documentation floating about on > dnsmasq-discuss as well as inside the the dnsmasq-2.66test10 tarball on how > to do it at the command line.... > > > I have the same problem with 3.7.2-4: my HE.net connection works fine, > CeroWrt gets the expected global IPv6 addresses, and each of the five > interfaces (not but not the babel ones) get nice routed global addresses > allocated from my /48. > > But my Mac (using either wired or wireless) doesn't get a v6 address. Do > you have any links to the dnsmasq documentation (a quick google didn't turn > up anything.) Thanks. > > Rich > > _______________________________________________ > Cerowrt-devel mailing list > Cerowrt-devel@lists.bufferbloat.net > https://lists.bufferbloat.net/listinfo/cerowrt-devel > > -- Dave Täht Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html