Re: [Cerowrt-devel] Good news with 3.3.8-6 (was: Still trouble with 6in4 tunnel)

[Dave Taht <dave.taht@gmail.com>]

On Tue, Jun 19, 2012 at 10:29 PM, Richard Brown
<richard.e.brown@dartware.com> wrote:
> Good news on the IPv6 tunneling front. A 6in4 tunnel to Hurricane Electric's Tunnelbroker.net simply works out of the box for build 3.3.8-6.
>
> Use the script at the bottom of the page below to establish the tunnel. Copy the info from the Tunnelbroker web page to the script and run the script. CeroWrt will establish the tunnel and assign IPv6 addresses to each of the interfaces. The script and instructions are at:
>
> http://www.bufferbloat.net/projects/cerowrt/wiki/IPv6_Tunnel
>
> NB The script does not assign an IPv6 address to either of the babel interfaces: I could not test it, so I left those lines commented out.

Babel interfaces use the same /128 for all interfaces. What I
typically do with a 48 available is is

2001:XXXX:YYYY:bab1::1/128

And then give ahcp
2001:XXXX:YYYY:bab1::2/64

to distribute.

And this script can be automated somewhat more, but I'm delighted to
hear it works now...

>
> Best regards,
>
> Rich Brown
> Hanover, NH USA
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel



-- 
Dave Täht
SKYPE: davetaht
http://ronsravings.blogspot.com/