[Cerowrt-devel] more mt7621 gear

[Cerowrt-devel] more mt7621 gear

[Dave Taht]

https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee

chris, you get anything in worth hacking on yet?

-- 
Dave Täht
Let's go make home routers and wifi faster! With better software!
http://blog.cerowrt.org

Re: [Cerowrt-devel] more mt7621 gear

[Christopher Waid]

On 2016-04-25 06:37 PM, Dave Taht wrote:
> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
> 
> chris, you get anything in worth hacking on yet?

Yes- I think so. Didn't I send an email about this already? I don't 
think anyone responded though. Or maybe I failed to read the responses. 
I asked if anybody would like me to send them a mediatek chipset based 
router board. If people did email me please let me know again who you 
are. I know we didn't send out any of the router boards. I got 5 of them 
I believe.

I'm currently flying back from the [GNU]LinuxFest North West event... 
but if people provide me addresses I can send out some sample router 
boards to start playing with.

I also got some USB mediatek chipset based wifi dongles in as well I 
believe. I forget how many of these I got. I also am brining in some 
PCIE mediatek cards theoretically although I'm unsure if we're actually 
getting our hands on these. I think the orders might have been canceled 
or something- or maybe I just didn't follow up on checking the goods 
shipped.

Re: [Cerowrt-devel] more mt7621 gear

[Dave Taht]

Please send 1 mediatek router (and pcie card when you get 'em) to:

Dave Taht & Lorna Reed
225 11th Ave apt 302
San Francisco, Ca, 94118-2167

I don't think I have time for the usb version.

I am standardizing on this for my upcoming work. It's pretty darn
libre, perhaps you could become a reseller of this also....

http://pcengines.ch/apu2c4.htm

On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
<chris@thinkpenguin.com> wrote:
> On 2016-04-25 06:37 PM, Dave Taht wrote:
>>
>>
>> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
>>
>> chris, you get anything in worth hacking on yet?
>
>
> Yes- I think so. Didn't I send an email about this already? I don't think
> anyone responded though. Or maybe I failed to read the responses. I asked if
> anybody would like me to send them a mediatek chipset based router board. If
> people did email me please let me know again who you are. I know we didn't
> send out any of the router boards. I got 5 of them I believe.
>
> I'm currently flying back from the [GNU]LinuxFest North West event... but if
> people provide me addresses I can send out some sample router boards to
> start playing with.
>
> I also got some USB mediatek chipset based wifi dongles in as well I
> believe. I forget how many of these I got. I also am brining in some PCIE
> mediatek cards theoretically although I'm unsure if we're actually getting
> our hands on these. I think the orders might have been canceled or
> something- or maybe I just didn't follow up on checking the goods shipped.



-- 
Dave Täht
Let's go make home routers and wifi faster! With better software!
http://blog.cerowrt.org

Re: [Cerowrt-devel] more mt7621 gear

[Outback Dingo]

[-- Attachment #1: Type: text/plain, Size: 2260 bytes --]

guys,

I am in china right now, i can probably source this in a day, let me know
if you want me to get one for you and ill forward it, im going to try to
order one today for myself

On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com> wrote:

> Please send 1 mediatek router (and pcie card when you get 'em) to:
>
> Dave Taht & Lorna Reed
> 225 11th Ave apt 302
> San Francisco, Ca, 94118-2167
>
> I don't think I have time for the usb version.
>
> I am standardizing on this for my upcoming work. It's pretty darn
> libre, perhaps you could become a reseller of this also....
>
> http://pcengines.ch/apu2c4.htm
>
> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
> <chris@thinkpenguin.com> wrote:
> > On 2016-04-25 06:37 PM, Dave Taht wrote:
> >>
> >>
> >>
> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
> >>
> >> chris, you get anything in worth hacking on yet?
> >
> >
> > Yes- I think so. Didn't I send an email about this already? I don't think
> > anyone responded though. Or maybe I failed to read the responses. I
> asked if
> > anybody would like me to send them a mediatek chipset based router
> board. If
> > people did email me please let me know again who you are. I know we
> didn't
> > send out any of the router boards. I got 5 of them I believe.
> >
> > I'm currently flying back from the [GNU]LinuxFest North West event...
> but if
> > people provide me addresses I can send out some sample router boards to
> > start playing with.
> >
> > I also got some USB mediatek chipset based wifi dongles in as well I
> > believe. I forget how many of these I got. I also am brining in some PCIE
> > mediatek cards theoretically although I'm unsure if we're actually
> getting
> > our hands on these. I think the orders might have been canceled or
> > something- or maybe I just didn't follow up on checking the goods
> shipped.
>
>
>
> --
> Dave Täht
> Let's go make home routers and wifi faster! With better software!
> http://blog.cerowrt.org
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>

[-- Attachment #2: Type: text/html, Size: 3365 bytes --]

Re: [Cerowrt-devel] more mt7621 gear

[Dave Taht]

detailed documentation on the chipset would be nice... in any language....

On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo <outbackdingo@gmail.com> wrote:
> guys,
>
> I am in china right now, i can probably source this in a day, let me know if
> you want me to get one for you and ill forward it, im going to try to order
> one today for myself
>
> On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com> wrote:
>>
>> Please send 1 mediatek router (and pcie card when you get 'em) to:
>>
>> Dave Taht & Lorna Reed
>> 225 11th Ave apt 302
>> San Francisco, Ca, 94118-2167
>>
>> I don't think I have time for the usb version.
>>
>> I am standardizing on this for my upcoming work. It's pretty darn
>> libre, perhaps you could become a reseller of this also....
>>
>> http://pcengines.ch/apu2c4.htm
>>
>> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
>> <chris@thinkpenguin.com> wrote:
>> > On 2016-04-25 06:37 PM, Dave Taht wrote:
>> >>
>> >>
>> >>
>> >> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
>> >>
>> >> chris, you get anything in worth hacking on yet?
>> >
>> >
>> > Yes- I think so. Didn't I send an email about this already? I don't
>> > think
>> > anyone responded though. Or maybe I failed to read the responses. I
>> > asked if
>> > anybody would like me to send them a mediatek chipset based router
>> > board. If
>> > people did email me please let me know again who you are. I know we
>> > didn't
>> > send out any of the router boards. I got 5 of them I believe.
>> >
>> > I'm currently flying back from the [GNU]LinuxFest North West event...
>> > but if
>> > people provide me addresses I can send out some sample router boards to
>> > start playing with.
>> >
>> > I also got some USB mediatek chipset based wifi dongles in as well I
>> > believe. I forget how many of these I got. I also am brining in some
>> > PCIE
>> > mediatek cards theoretically although I'm unsure if we're actually
>> > getting
>> > our hands on these. I think the orders might have been canceled or
>> > something- or maybe I just didn't follow up on checking the goods
>> > shipped.
>>
>>
>>
>> --
>> Dave Täht
>> Let's go make home routers and wifi faster! With better software!
>> http://blog.cerowrt.org
>> _______________________________________________
>> Cerowrt-devel mailing list
>> Cerowrt-devel@lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
>



-- 
Dave Täht
Let's go make home routers and wifi faster! With better software!
http://blog.cerowrt.org

Re: [Cerowrt-devel] more mt7621 gear

[Outback Dingo]

[-- Attachment #1: Type: text/plain, Size: 3222 bytes --]

router itself
http://cn.made-in-china.com/showroom/szzbtdz/product-detailUMVJbARKZCkv/ZBT-WG3526%E6%99%BA%E5%8D%9A%E9%80%9A%E9%AB%98%E7%AB%AF%E5%8F%8C%E9%A2%91%E5%A4%A7%E5%8A%9F%E7%8E%87%E6%99%BA%E8%83%BD%E6%97%A0%E7%BA%BF%E8%B7%AF%E7%94%B1%E5%99%A8%E5%AE%9A%E5%88%B6OEM.html

chip set http://ftp.mqmaker.com/WiTi/Docs/Hardware/MT7621.pdf

On Tue, Apr 26, 2016 at 4:38 AM, Dave Taht <dave.taht@gmail.com> wrote:

> detailed documentation on the chipset would be nice... in any language....
>
> On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo <outbackdingo@gmail.com>
> wrote:
> > guys,
> >
> > I am in china right now, i can probably source this in a day, let me
> know if
> > you want me to get one for you and ill forward it, im going to try to
> order
> > one today for myself
> >
> > On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com> wrote:
> >>
> >> Please send 1 mediatek router (and pcie card when you get 'em) to:
> >>
> >> Dave Taht & Lorna Reed
> >> 225 11th Ave apt 302
> >> San Francisco, Ca, 94118-2167
> >>
> >> I don't think I have time for the usb version.
> >>
> >> I am standardizing on this for my upcoming work. It's pretty darn
> >> libre, perhaps you could become a reseller of this also....
> >>
> >> http://pcengines.ch/apu2c4.htm
> >>
> >> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
> >> <chris@thinkpenguin.com> wrote:
> >> > On 2016-04-25 06:37 PM, Dave Taht wrote:
> >> >>
> >> >>
> >> >>
> >> >>
> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
> >> >>
> >> >> chris, you get anything in worth hacking on yet?
> >> >
> >> >
> >> > Yes- I think so. Didn't I send an email about this already? I don't
> >> > think
> >> > anyone responded though. Or maybe I failed to read the responses. I
> >> > asked if
> >> > anybody would like me to send them a mediatek chipset based router
> >> > board. If
> >> > people did email me please let me know again who you are. I know we
> >> > didn't
> >> > send out any of the router boards. I got 5 of them I believe.
> >> >
> >> > I'm currently flying back from the [GNU]LinuxFest North West event...
> >> > but if
> >> > people provide me addresses I can send out some sample router boards
> to
> >> > start playing with.
> >> >
> >> > I also got some USB mediatek chipset based wifi dongles in as well I
> >> > believe. I forget how many of these I got. I also am brining in some
> >> > PCIE
> >> > mediatek cards theoretically although I'm unsure if we're actually
> >> > getting
> >> > our hands on these. I think the orders might have been canceled or
> >> > something- or maybe I just didn't follow up on checking the goods
> >> > shipped.
> >>
> >>
> >>
> >> --
> >> Dave Täht
> >> Let's go make home routers and wifi faster! With better software!
> >> http://blog.cerowrt.org
> >> _______________________________________________
> >> Cerowrt-devel mailing list
> >> Cerowrt-devel@lists.bufferbloat.net
> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
> >
> >
>
>
>
> --
> Dave Täht
> Let's go make home routers and wifi faster! With better software!
> http://blog.cerowrt.org
>

[-- Attachment #2: Type: text/html, Size: 5287 bytes --]

Re: [Cerowrt-devel] more mt7621 gear

[Dave Taht]

340 bucks each, am I reading it right?

as data sheets go, that's not bad (there are more in that dir), but
what I wanted was the register sets for the wifi and cpu chips.

On Mon, Apr 25, 2016 at 8:57 PM, Outback Dingo <outbackdingo@gmail.com> wrote:
> router itself
> http://cn.made-in-china.com/showroom/szzbtdz/product-detailUMVJbARKZCkv/ZBT-WG3526%E6%99%BA%E5%8D%9A%E9%80%9A%E9%AB%98%E7%AB%AF%E5%8F%8C%E9%A2%91%E5%A4%A7%E5%8A%9F%E7%8E%87%E6%99%BA%E8%83%BD%E6%97%A0%E7%BA%BF%E8%B7%AF%E7%94%B1%E5%99%A8%E5%AE%9A%E5%88%B6OEM.html
>
> chip set http://ftp.mqmaker.com/WiTi/Docs/Hardware/MT7621.pdf
>
> On Tue, Apr 26, 2016 at 4:38 AM, Dave Taht <dave.taht@gmail.com> wrote:
>>
>> detailed documentation on the chipset would be nice... in any language....
>>
>> On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo <outbackdingo@gmail.com>
>> wrote:
>> > guys,
>> >
>> > I am in china right now, i can probably source this in a day, let me
>> > know if
>> > you want me to get one for you and ill forward it, im going to try to
>> > order
>> > one today for myself
>> >
>> > On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com> wrote:
>> >>
>> >> Please send 1 mediatek router (and pcie card when you get 'em) to:
>> >>
>> >> Dave Taht & Lorna Reed
>> >> 225 11th Ave apt 302
>> >> San Francisco, Ca, 94118-2167
>> >>
>> >> I don't think I have time for the usb version.
>> >>
>> >> I am standardizing on this for my upcoming work. It's pretty darn
>> >> libre, perhaps you could become a reseller of this also....
>> >>
>> >> http://pcengines.ch/apu2c4.htm
>> >>
>> >> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
>> >> <chris@thinkpenguin.com> wrote:
>> >> > On 2016-04-25 06:37 PM, Dave Taht wrote:
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
>> >> >>
>> >> >> chris, you get anything in worth hacking on yet?
>> >> >
>> >> >
>> >> > Yes- I think so. Didn't I send an email about this already? I don't
>> >> > think
>> >> > anyone responded though. Or maybe I failed to read the responses. I
>> >> > asked if
>> >> > anybody would like me to send them a mediatek chipset based router
>> >> > board. If
>> >> > people did email me please let me know again who you are. I know we
>> >> > didn't
>> >> > send out any of the router boards. I got 5 of them I believe.
>> >> >
>> >> > I'm currently flying back from the [GNU]LinuxFest North West event...
>> >> > but if
>> >> > people provide me addresses I can send out some sample router boards
>> >> > to
>> >> > start playing with.
>> >> >
>> >> > I also got some USB mediatek chipset based wifi dongles in as well I
>> >> > believe. I forget how many of these I got. I also am brining in some
>> >> > PCIE
>> >> > mediatek cards theoretically although I'm unsure if we're actually
>> >> > getting
>> >> > our hands on these. I think the orders might have been canceled or
>> >> > something- or maybe I just didn't follow up on checking the goods
>> >> > shipped.
>> >>
>> >>
>> >>
>> >> --
>> >> Dave Täht
>> >> Let's go make home routers and wifi faster! With better software!
>> >> http://blog.cerowrt.org
>> >> _______________________________________________
>> >> Cerowrt-devel mailing list
>> >> Cerowrt-devel@lists.bufferbloat.net
>> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>> >
>> >
>>
>>
>>
>> --
>> Dave Täht
>> Let's go make home routers and wifi faster! With better software!
>> http://blog.cerowrt.org
>
>



-- 
Dave Täht
Let's go make home routers and wifi faster! With better software!
http://blog.cerowrt.org

Re: [Cerowrt-devel] more mt7621 gear

[Outback Dingo]

[-- Attachment #1: Type: text/plain, Size: 4073 bytes --]

NO my wife says its 340 rmb... like less then 60 USD

On Tue, Apr 26, 2016 at 6:02 AM, Dave Taht <dave.taht@gmail.com> wrote:

> 340 bucks each, am I reading it right?
>
> as data sheets go, that's not bad (there are more in that dir), but
> what I wanted was the register sets for the wifi and cpu chips.
>
> On Mon, Apr 25, 2016 at 8:57 PM, Outback Dingo <outbackdingo@gmail.com>
> wrote:
> > router itself
> >
> http://cn.made-in-china.com/showroom/szzbtdz/product-detailUMVJbARKZCkv/ZBT-WG3526%E6%99%BA%E5%8D%9A%E9%80%9A%E9%AB%98%E7%AB%AF%E5%8F%8C%E9%A2%91%E5%A4%A7%E5%8A%9F%E7%8E%87%E6%99%BA%E8%83%BD%E6%97%A0%E7%BA%BF%E8%B7%AF%E7%94%B1%E5%99%A8%E5%AE%9A%E5%88%B6OEM.html
> >
> > chip set http://ftp.mqmaker.com/WiTi/Docs/Hardware/MT7621.pdf
> >
> > On Tue, Apr 26, 2016 at 4:38 AM, Dave Taht <dave.taht@gmail.com> wrote:
> >>
> >> detailed documentation on the chipset would be nice... in any
> language....
> >>
> >> On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo <outbackdingo@gmail.com>
> >> wrote:
> >> > guys,
> >> >
> >> > I am in china right now, i can probably source this in a day, let me
> >> > know if
> >> > you want me to get one for you and ill forward it, im going to try to
> >> > order
> >> > one today for myself
> >> >
> >> > On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com>
> wrote:
> >> >>
> >> >> Please send 1 mediatek router (and pcie card when you get 'em) to:
> >> >>
> >> >> Dave Taht & Lorna Reed
> >> >> 225 11th Ave apt 302
> >> >> San Francisco, Ca, 94118-2167
> >> >>
> >> >> I don't think I have time for the usb version.
> >> >>
> >> >> I am standardizing on this for my upcoming work. It's pretty darn
> >> >> libre, perhaps you could become a reseller of this also....
> >> >>
> >> >> http://pcengines.ch/apu2c4.htm
> >> >>
> >> >> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
> >> >> <chris@thinkpenguin.com> wrote:
> >> >> > On 2016-04-25 06:37 PM, Dave Taht wrote:
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
> >> >> >>
> >> >> >> chris, you get anything in worth hacking on yet?
> >> >> >
> >> >> >
> >> >> > Yes- I think so. Didn't I send an email about this already? I don't
> >> >> > think
> >> >> > anyone responded though. Or maybe I failed to read the responses. I
> >> >> > asked if
> >> >> > anybody would like me to send them a mediatek chipset based router
> >> >> > board. If
> >> >> > people did email me please let me know again who you are. I know we
> >> >> > didn't
> >> >> > send out any of the router boards. I got 5 of them I believe.
> >> >> >
> >> >> > I'm currently flying back from the [GNU]LinuxFest North West
> event...
> >> >> > but if
> >> >> > people provide me addresses I can send out some sample router
> boards
> >> >> > to
> >> >> > start playing with.
> >> >> >
> >> >> > I also got some USB mediatek chipset based wifi dongles in as well
> I
> >> >> > believe. I forget how many of these I got. I also am brining in
> some
> >> >> > PCIE
> >> >> > mediatek cards theoretically although I'm unsure if we're actually
> >> >> > getting
> >> >> > our hands on these. I think the orders might have been canceled or
> >> >> > something- or maybe I just didn't follow up on checking the goods
> >> >> > shipped.
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Dave Täht
> >> >> Let's go make home routers and wifi faster! With better software!
> >> >> http://blog.cerowrt.org
> >> >> _______________________________________________
> >> >> Cerowrt-devel mailing list
> >> >> Cerowrt-devel@lists.bufferbloat.net
> >> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> Dave Täht
> >> Let's go make home routers and wifi faster! With better software!
> >> http://blog.cerowrt.org
> >
> >
>
>
>
> --
> Dave Täht
> Let's go make home routers and wifi faster! With better software!
> http://blog.cerowrt.org
>

[-- Attachment #2: Type: text/html, Size: 6949 bytes --]

Re: [Cerowrt-devel] more mt7621 gear

[Outback Dingo]

[-- Attachment #1: Type: text/plain, Size: 4383 bytes --]

this is the same device
http://www.zbtlink.com/products/router/ZBT-WG2926.html

On Tue, Apr 26, 2016 at 6:13 AM, Outback Dingo <outbackdingo@gmail.com>
wrote:

> NO my wife says its 340 rmb... like less then 60 USD
>
> On Tue, Apr 26, 2016 at 6:02 AM, Dave Taht <dave.taht@gmail.com> wrote:
>
>> 340 bucks each, am I reading it right?
>>
>> as data sheets go, that's not bad (there are more in that dir), but
>> what I wanted was the register sets for the wifi and cpu chips.
>>
>> On Mon, Apr 25, 2016 at 8:57 PM, Outback Dingo <outbackdingo@gmail.com>
>> wrote:
>> > router itself
>> >
>> http://cn.made-in-china.com/showroom/szzbtdz/product-detailUMVJbARKZCkv/ZBT-WG3526%E6%99%BA%E5%8D%9A%E9%80%9A%E9%AB%98%E7%AB%AF%E5%8F%8C%E9%A2%91%E5%A4%A7%E5%8A%9F%E7%8E%87%E6%99%BA%E8%83%BD%E6%97%A0%E7%BA%BF%E8%B7%AF%E7%94%B1%E5%99%A8%E5%AE%9A%E5%88%B6OEM.html
>> >
>> > chip set http://ftp.mqmaker.com/WiTi/Docs/Hardware/MT7621.pdf
>> >
>> > On Tue, Apr 26, 2016 at 4:38 AM, Dave Taht <dave.taht@gmail.com> wrote:
>> >>
>> >> detailed documentation on the chipset would be nice... in any
>> language....
>> >>
>> >> On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo <outbackdingo@gmail.com
>> >
>> >> wrote:
>> >> > guys,
>> >> >
>> >> > I am in china right now, i can probably source this in a day, let me
>> >> > know if
>> >> > you want me to get one for you and ill forward it, im going to try to
>> >> > order
>> >> > one today for myself
>> >> >
>> >> > On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com>
>> wrote:
>> >> >>
>> >> >> Please send 1 mediatek router (and pcie card when you get 'em) to:
>> >> >>
>> >> >> Dave Taht & Lorna Reed
>> >> >> 225 11th Ave apt 302
>> >> >> San Francisco, Ca, 94118-2167
>> >> >>
>> >> >> I don't think I have time for the usb version.
>> >> >>
>> >> >> I am standardizing on this for my upcoming work. It's pretty darn
>> >> >> libre, perhaps you could become a reseller of this also....
>> >> >>
>> >> >> http://pcengines.ch/apu2c4.htm
>> >> >>
>> >> >> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
>> >> >> <chris@thinkpenguin.com> wrote:
>> >> >> > On 2016-04-25 06:37 PM, Dave Taht wrote:
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
>> >> >> >>
>> >> >> >> chris, you get anything in worth hacking on yet?
>> >> >> >
>> >> >> >
>> >> >> > Yes- I think so. Didn't I send an email about this already? I
>> don't
>> >> >> > think
>> >> >> > anyone responded though. Or maybe I failed to read the responses.
>> I
>> >> >> > asked if
>> >> >> > anybody would like me to send them a mediatek chipset based router
>> >> >> > board. If
>> >> >> > people did email me please let me know again who you are. I know
>> we
>> >> >> > didn't
>> >> >> > send out any of the router boards. I got 5 of them I believe.
>> >> >> >
>> >> >> > I'm currently flying back from the [GNU]LinuxFest North West
>> event...
>> >> >> > but if
>> >> >> > people provide me addresses I can send out some sample router
>> boards
>> >> >> > to
>> >> >> > start playing with.
>> >> >> >
>> >> >> > I also got some USB mediatek chipset based wifi dongles in as
>> well I
>> >> >> > believe. I forget how many of these I got. I also am brining in
>> some
>> >> >> > PCIE
>> >> >> > mediatek cards theoretically although I'm unsure if we're actually
>> >> >> > getting
>> >> >> > our hands on these. I think the orders might have been canceled or
>> >> >> > something- or maybe I just didn't follow up on checking the goods
>> >> >> > shipped.
>> >> >>
>> >> >>
>> >> >>
>> >> >> --
>> >> >> Dave Täht
>> >> >> Let's go make home routers and wifi faster! With better software!
>> >> >> http://blog.cerowrt.org
>> >> >> _______________________________________________
>> >> >> Cerowrt-devel mailing list
>> >> >> Cerowrt-devel@lists.bufferbloat.net
>> >> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>> >> >
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> Dave Täht
>> >> Let's go make home routers and wifi faster! With better software!
>> >> http://blog.cerowrt.org
>> >
>> >
>>
>>
>>
>> --
>> Dave Täht
>> Let's go make home routers and wifi faster! With better software!
>> http://blog.cerowrt.org
>>
>
>

[-- Attachment #2: Type: text/html, Size: 7597 bytes --]

Re: [Cerowrt-devel] more mt7621 gear

[Outback Dingo]

[-- Attachment #1: Type: text/plain, Size: 4738 bytes --]

https://detail.1688.com/offer/1277654521.html

same specs same device 330 RMB... i just ordered one....

On Tue, Apr 26, 2016 at 6:23 AM, Outback Dingo <outbackdingo@gmail.com>
wrote:

> this is the same device
> http://www.zbtlink.com/products/router/ZBT-WG2926.html
>
> On Tue, Apr 26, 2016 at 6:13 AM, Outback Dingo <outbackdingo@gmail.com>
> wrote:
>
>> NO my wife says its 340 rmb... like less then 60 USD
>>
>> On Tue, Apr 26, 2016 at 6:02 AM, Dave Taht <dave.taht@gmail.com> wrote:
>>
>>> 340 bucks each, am I reading it right?
>>>
>>> as data sheets go, that's not bad (there are more in that dir), but
>>> what I wanted was the register sets for the wifi and cpu chips.
>>>
>>> On Mon, Apr 25, 2016 at 8:57 PM, Outback Dingo <outbackdingo@gmail.com>
>>> wrote:
>>> > router itself
>>> >
>>> http://cn.made-in-china.com/showroom/szzbtdz/product-detailUMVJbARKZCkv/ZBT-WG3526%E6%99%BA%E5%8D%9A%E9%80%9A%E9%AB%98%E7%AB%AF%E5%8F%8C%E9%A2%91%E5%A4%A7%E5%8A%9F%E7%8E%87%E6%99%BA%E8%83%BD%E6%97%A0%E7%BA%BF%E8%B7%AF%E7%94%B1%E5%99%A8%E5%AE%9A%E5%88%B6OEM.html
>>> >
>>> > chip set http://ftp.mqmaker.com/WiTi/Docs/Hardware/MT7621.pdf
>>> >
>>> > On Tue, Apr 26, 2016 at 4:38 AM, Dave Taht <dave.taht@gmail.com>
>>> wrote:
>>> >>
>>> >> detailed documentation on the chipset would be nice... in any
>>> language....
>>> >>
>>> >> On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo <
>>> outbackdingo@gmail.com>
>>> >> wrote:
>>> >> > guys,
>>> >> >
>>> >> > I am in china right now, i can probably source this in a day, let me
>>> >> > know if
>>> >> > you want me to get one for you and ill forward it, im going to try
>>> to
>>> >> > order
>>> >> > one today for myself
>>> >> >
>>> >> > On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com>
>>> wrote:
>>> >> >>
>>> >> >> Please send 1 mediatek router (and pcie card when you get 'em) to:
>>> >> >>
>>> >> >> Dave Taht & Lorna Reed
>>> >> >> 225 11th Ave apt 302
>>> >> >> San Francisco, Ca, 94118-2167
>>> >> >>
>>> >> >> I don't think I have time for the usb version.
>>> >> >>
>>> >> >> I am standardizing on this for my upcoming work. It's pretty darn
>>> >> >> libre, perhaps you could become a reseller of this also....
>>> >> >>
>>> >> >> http://pcengines.ch/apu2c4.htm
>>> >> >>
>>> >> >> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
>>> >> >> <chris@thinkpenguin.com> wrote:
>>> >> >> > On 2016-04-25 06:37 PM, Dave Taht wrote:
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
>>> >> >> >>
>>> >> >> >> chris, you get anything in worth hacking on yet?
>>> >> >> >
>>> >> >> >
>>> >> >> > Yes- I think so. Didn't I send an email about this already? I
>>> don't
>>> >> >> > think
>>> >> >> > anyone responded though. Or maybe I failed to read the
>>> responses. I
>>> >> >> > asked if
>>> >> >> > anybody would like me to send them a mediatek chipset based
>>> router
>>> >> >> > board. If
>>> >> >> > people did email me please let me know again who you are. I know
>>> we
>>> >> >> > didn't
>>> >> >> > send out any of the router boards. I got 5 of them I believe.
>>> >> >> >
>>> >> >> > I'm currently flying back from the [GNU]LinuxFest North West
>>> event...
>>> >> >> > but if
>>> >> >> > people provide me addresses I can send out some sample router
>>> boards
>>> >> >> > to
>>> >> >> > start playing with.
>>> >> >> >
>>> >> >> > I also got some USB mediatek chipset based wifi dongles in as
>>> well I
>>> >> >> > believe. I forget how many of these I got. I also am brining in
>>> some
>>> >> >> > PCIE
>>> >> >> > mediatek cards theoretically although I'm unsure if we're
>>> actually
>>> >> >> > getting
>>> >> >> > our hands on these. I think the orders might have been canceled
>>> or
>>> >> >> > something- or maybe I just didn't follow up on checking the goods
>>> >> >> > shipped.
>>> >> >>
>>> >> >>
>>> >> >>
>>> >> >> --
>>> >> >> Dave Täht
>>> >> >> Let's go make home routers and wifi faster! With better software!
>>> >> >> http://blog.cerowrt.org
>>> >> >> _______________________________________________
>>> >> >> Cerowrt-devel mailing list
>>> >> >> Cerowrt-devel@lists.bufferbloat.net
>>> >> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>> >> >
>>> >> >
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> Dave Täht
>>> >> Let's go make home routers and wifi faster! With better software!
>>> >> http://blog.cerowrt.org
>>> >
>>> >
>>>
>>>
>>>
>>> --
>>> Dave Täht
>>> Let's go make home routers and wifi faster! With better software!
>>> http://blog.cerowrt.org
>>>
>>
>>
>

[-- Attachment #2: Type: text/html, Size: 8205 bytes --]

Re: [Cerowrt-devel] more mt7621 gear

[Outback Dingo]

[-- Attachment #1: Type: text/plain, Size: 5092 bytes --]

my mt7621  AP arrived today, ill be checking it out, also note i found
this....

https://mqmaker.com/

On Tue, Apr 26, 2016 at 6:48 AM, Outback Dingo <outbackdingo@gmail.com>
wrote:

> https://detail.1688.com/offer/1277654521.html
>
> same specs same device 330 RMB... i just ordered one....
>
> On Tue, Apr 26, 2016 at 6:23 AM, Outback Dingo <outbackdingo@gmail.com>
> wrote:
>
>> this is the same device
>> http://www.zbtlink.com/products/router/ZBT-WG2926.html
>>
>> On Tue, Apr 26, 2016 at 6:13 AM, Outback Dingo <outbackdingo@gmail.com>
>> wrote:
>>
>>> NO my wife says its 340 rmb... like less then 60 USD
>>>
>>> On Tue, Apr 26, 2016 at 6:02 AM, Dave Taht <dave.taht@gmail.com> wrote:
>>>
>>>> 340 bucks each, am I reading it right?
>>>>
>>>> as data sheets go, that's not bad (there are more in that dir), but
>>>> what I wanted was the register sets for the wifi and cpu chips.
>>>>
>>>> On Mon, Apr 25, 2016 at 8:57 PM, Outback Dingo <outbackdingo@gmail.com>
>>>> wrote:
>>>> > router itself
>>>> >
>>>> http://cn.made-in-china.com/showroom/szzbtdz/product-detailUMVJbARKZCkv/ZBT-WG3526%E6%99%BA%E5%8D%9A%E9%80%9A%E9%AB%98%E7%AB%AF%E5%8F%8C%E9%A2%91%E5%A4%A7%E5%8A%9F%E7%8E%87%E6%99%BA%E8%83%BD%E6%97%A0%E7%BA%BF%E8%B7%AF%E7%94%B1%E5%99%A8%E5%AE%9A%E5%88%B6OEM.html
>>>> >
>>>> > chip set http://ftp.mqmaker.com/WiTi/Docs/Hardware/MT7621.pdf
>>>> >
>>>> > On Tue, Apr 26, 2016 at 4:38 AM, Dave Taht <dave.taht@gmail.com>
>>>> wrote:
>>>> >>
>>>> >> detailed documentation on the chipset would be nice... in any
>>>> language....
>>>> >>
>>>> >> On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo <
>>>> outbackdingo@gmail.com>
>>>> >> wrote:
>>>> >> > guys,
>>>> >> >
>>>> >> > I am in china right now, i can probably source this in a day, let
>>>> me
>>>> >> > know if
>>>> >> > you want me to get one for you and ill forward it, im going to try
>>>> to
>>>> >> > order
>>>> >> > one today for myself
>>>> >> >
>>>> >> > On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com>
>>>> wrote:
>>>> >> >>
>>>> >> >> Please send 1 mediatek router (and pcie card when you get 'em) to:
>>>> >> >>
>>>> >> >> Dave Taht & Lorna Reed
>>>> >> >> 225 11th Ave apt 302
>>>> >> >> San Francisco, Ca, 94118-2167
>>>> >> >>
>>>> >> >> I don't think I have time for the usb version.
>>>> >> >>
>>>> >> >> I am standardizing on this for my upcoming work. It's pretty darn
>>>> >> >> libre, perhaps you could become a reseller of this also....
>>>> >> >>
>>>> >> >> http://pcengines.ch/apu2c4.htm
>>>> >> >>
>>>> >> >> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
>>>> >> >> <chris@thinkpenguin.com> wrote:
>>>> >> >> > On 2016-04-25 06:37 PM, Dave Taht wrote:
>>>> >> >> >>
>>>> >> >> >>
>>>> >> >> >>
>>>> >> >> >>
>>>> >> >> >>
>>>> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
>>>> >> >> >>
>>>> >> >> >> chris, you get anything in worth hacking on yet?
>>>> >> >> >
>>>> >> >> >
>>>> >> >> > Yes- I think so. Didn't I send an email about this already? I
>>>> don't
>>>> >> >> > think
>>>> >> >> > anyone responded though. Or maybe I failed to read the
>>>> responses. I
>>>> >> >> > asked if
>>>> >> >> > anybody would like me to send them a mediatek chipset based
>>>> router
>>>> >> >> > board. If
>>>> >> >> > people did email me please let me know again who you are. I
>>>> know we
>>>> >> >> > didn't
>>>> >> >> > send out any of the router boards. I got 5 of them I believe.
>>>> >> >> >
>>>> >> >> > I'm currently flying back from the [GNU]LinuxFest North West
>>>> event...
>>>> >> >> > but if
>>>> >> >> > people provide me addresses I can send out some sample router
>>>> boards
>>>> >> >> > to
>>>> >> >> > start playing with.
>>>> >> >> >
>>>> >> >> > I also got some USB mediatek chipset based wifi dongles in as
>>>> well I
>>>> >> >> > believe. I forget how many of these I got. I also am brining in
>>>> some
>>>> >> >> > PCIE
>>>> >> >> > mediatek cards theoretically although I'm unsure if we're
>>>> actually
>>>> >> >> > getting
>>>> >> >> > our hands on these. I think the orders might have been canceled
>>>> or
>>>> >> >> > something- or maybe I just didn't follow up on checking the
>>>> goods
>>>> >> >> > shipped.
>>>> >> >>
>>>> >> >>
>>>> >> >>
>>>> >> >> --
>>>> >> >> Dave Täht
>>>> >> >> Let's go make home routers and wifi faster! With better software!
>>>> >> >> http://blog.cerowrt.org
>>>> >> >> _______________________________________________
>>>> >> >> Cerowrt-devel mailing list
>>>> >> >> Cerowrt-devel@lists.bufferbloat.net
>>>> >> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>>> >> >
>>>> >> >
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> Dave Täht
>>>> >> Let's go make home routers and wifi faster! With better software!
>>>> >> http://blog.cerowrt.org
>>>> >
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> Dave Täht
>>>> Let's go make home routers and wifi faster! With better software!
>>>> http://blog.cerowrt.org
>>>>
>>>
>>>
>>
>

[-- Attachment #2: Type: text/html, Size: 8787 bytes --]

Re: [Cerowrt-devel] more mt7621 gear

[Outback Dingo]

[-- Attachment #1: Type: text/plain, Size: 31599 bytes --]

So this i finally got this ZBT-WG3526 seems a decent little device Costs
$60 USD, did get around to building an OpenWRT image on it and flashed it
this morning.  installed openvpn and luci web ui ... looks pretty good so
far, and havient had any issues with the latest OpenWRT trunk on it. Seems
everything is wortking quite nicely.
Status
System
Hostname OpenWrt
Model ZBT-WG3526
Firmware Version OpenWrt Designated Driver r49274 / LuCI Master
(git-16.117.68571-313e325)
Kernel Version 4.4.7
Local Time Sun May 1 05:12:20 2016
Uptime 3h 32m 42s
Load Average 0.03, 0.02, 0.05
Memory
Total Available
479112 kB / 514464 kB (93%)
Free
476044 kB / 514464 kB (92%)
Buffered
3068 kB / 514464 kB (0%)

dmesg
[    0.000000] Linux version 4.4.7 (dingo@localhost.localdomain) (gcc
version 5.3.0 (OpenWrt GCC 5.3.0 r49274) ) #3 SMP Sun May 1 01:08:55 UTC
2016
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is ZBT-WG3526
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 1c000000 @ 00000000 (usable)
[    0.000000]  memory: 04000000 @ 20000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  [mem 0x0000000010000000-0x0000000023ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001bffffff]
[    0.000000]   node   0: [mem 0x0000000020000000-0x0000000023ffffff]
[    0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x0000000023ffffff]
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat 8044cfe0, node_mem_map
81000000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] PERCPU: Embedded 10 pages/cpu @8148d000 s8416 r8192 d24352
u40960
[    0.000000] pcpu-alloc: s8416 r8192 d24352 u40960 alloc=10*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 130560
[    0.000000] Kernel command line: console=ttyS0,115200
rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes)
[    0.000000] Writing ErrCtl register=0004621a
[    0.000000] Readback ErrCtl register=0004621a
[    0.000000] Memory: 514232K/524288K available (3508K kernel code, 163K
rwdata, 820K rodata, 232K init, 248K bss, 10056K reserved, 0K cma-reserved,
262144K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles:
0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps
every 21474836475000000ns
[    0.060000] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[    0.080000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[    0.080000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
32 bytes
[    0.080000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.090000] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.170000] Synchronize counters for CPU 1: done.
[    0.170000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[    0.170000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
32 bytes
[    0.170000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.170000] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.250000] Synchronize counters for CPU 2: done.
[    0.250000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[    0.250000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
32 bytes
[    0.250000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.250000] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.330000] Synchronize counters for CPU 3: done.
[    0.330000] Brought up 4 CPUs
[    0.340000] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.350000] pinctrl core: initialized pinctrl subsystem
[    0.350000] NET: Registered protocol family 16
[    0.360000] rt2880-pinmux pinctrl: try to register 61 pins ...
[    0.360000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 47 (io47) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 48 (io48) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 49 (io49) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 50 (io50) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 51 (io51) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 52 (io52) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 53 (io53) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 54 (io54) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 55 (io55) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 56 (io56) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 57 (io57) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 58 (io58) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 59 (io59) on rt2880-pinmux
[    0.360000] pinctrl core: registered pin 60 (io60) on rt2880-pinmux
[    0.360000] pinctrl core: add 5 pinctrl maps
[    0.360000] rt2880-pinmux pinctrl: found group selector 5 for wdt
[    0.360000] rt2880-pinmux pinctrl: found group selector 8 for rgmii2
[    0.360000] rt2880-pinmux pinctrl: invalid group "wdt rst" for function
"gpio"
[    0.370000] rt2880-pinmux pinctrl: found group selector 4 for jtag
[    0.370000] rt2880-pinmux pinctrl: found group selector 7 for mdio
[    0.370000] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 22 (io22) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 23 (io23) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 24 (io24) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 25 (io25) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 26 (io26) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 27 (io27) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 28 (io28) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 29 (io29) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 30 (io30) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 31 (io31) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 32 (io32) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 33 (io33) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 15 (io15) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 16 (io16) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 20 (io20) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: request pin 21 (io21) for pinctrl
[    0.370000] rt2880-pinmux pinctrl: failed to lookup the sleep state
[    0.370000] FPU Affinity set after 11720 emulations
[    0.400000] pinctrl core: add 1 pinctrl maps
[    0.400000] rt2880-pinmux pinctrl: found group selector 6 for pcie
[    0.400000] rt2880-pinmux pinctrl: request pin 19 (io19) for
1e140000.pcie
[    0.400000] pull PCIe RST: RALINK_RSTCTRL = 0
[    0.700000] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.700000] ***** Xtal 40MHz *****
[    0.710000] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.710000] Port 0 N_FTS = 1b102800
[    0.710000] Port 1 N_FTS = 1b102800
[    0.720000] Port 2 N_FTS = 1b102800
[    1.870000]  -> 21007f2
[    1.870000] PCIE0 enabled
[    1.870000] PCIE1 enabled
[    1.880000] PCIE2 enabled
[    1.880000] PCI host bridge /pcie@1e140000 ranges:
[    1.880000]  MEM 0x0000000060000000..0x000000006fffffff
[    1.890000]   IO 0x000000001e160000..0x000000001e16ffff
[    1.890000] PCI coherence region base: 0x60000000, mask/settings:
0xf0000002
[    1.930000] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.930000] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.940000] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.940000] PCI host bridge to bus 0000:00
[    1.950000] pci_bus 0000:00: root bus resource [mem
0x60000000-0x6fffffff]
[    1.960000] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    1.960000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags
0x0]
[    1.970000] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[    1.980000] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    1.980000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.980000] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    1.980000] pci 0000:00:00.0: supports D1
[    1.980000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.980000] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    1.980000] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.980000] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    1.980000] pci 0000:00:01.0: supports D1
[    1.980000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    1.980000] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
[    1.980000] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.980000] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    1.980000] pci 0000:00:02.0: supports D1
[    1.980000] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
[    1.980000] pci 0000:00:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[    1.980000] pci 0000:00:01.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[    1.990000] pci 0000:00:02.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[    2.000000] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
[    2.000000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    2.000000] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    2.000000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.000000] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
[    2.000000] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff
64bit]
[    2.000000] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.000000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    2.000000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    2.000000] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
[    2.000000] pci 0000:03:00.0: reg 0x10: [io  0x0000-0x0007]
[    2.000000] pci 0000:03:00.0: reg 0x14: [io  0x0000-0x0003]
[    2.000000] pci 0000:03:00.0: reg 0x18: [io  0x0000-0x0007]
[    2.000000] pci 0000:03:00.0: reg 0x1c: [io  0x0000-0x0003]
[    2.000000] pci 0000:03:00.0: reg 0x20: [io  0x0000-0x001f]
[    2.000000] pci 0000:03:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
[    2.000000] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.000000] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[    2.000000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
[    2.000000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    2.010000] pci 0000:00:00.0: BAR 0: failed to assign [mem size
0x80000000]
[    2.020000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.020000] pci 0000:00:01.0: BAR 0: failed to assign [mem size
0x80000000]
[    2.030000] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
[    2.040000] pci 0000:00:02.0: BAR 0: failed to assign [mem size
0x80000000]
[    2.040000] pci 0000:00:00.0: BAR 8: assigned [mem
0x60000000-0x600fffff]
[    2.050000] pci 0000:00:01.0: BAR 8: assigned [mem
0x60100000-0x601fffff]
[    2.060000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff
pref]
[    2.060000] pci 0000:00:02.0: BAR 8: assigned [mem
0x60300000-0x603fffff]
[    2.070000] pci 0000:00:02.0: BAR 9: assigned [mem 0x60400000-0x604fffff
pref]
[    2.080000] pci 0000:00:00.0: BAR 1: assigned [mem
0x60500000-0x6050ffff]
[    2.080000] pci 0000:00:01.0: BAR 1: assigned [mem
0x60510000-0x6051ffff]
[    2.090000] pci 0000:00:02.0: BAR 1: assigned [mem
0x60520000-0x6052ffff]
[    2.100000] pci 0000:00:02.0: BAR 7: no space for [io  size 0x1000]
[    2.100000] pci 0000:00:02.0: BAR 7: failed to assign [io  size 0x1000]
[    2.110000] pci 0000:01:00.0: BAR 0: assigned [mem
0x60000000-0x600fffff]
[    2.120000] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.120000] pci 0000:00:00.0:   bridge window [mem
0x60000000-0x600fffff]
[    2.130000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff
64bit]
[    2.140000] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff
pref]
[    2.140000] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.150000] pci 0000:00:01.0:   bridge window [mem
0x60100000-0x601fffff]
[    2.150000] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff
pref]
[    2.160000] pci 0000:03:00.0: BAR 6: assigned [mem 0x60400000-0x6040ffff
pref]
[    2.170000] pci 0000:03:00.0: BAR 5: assigned [mem
0x60300000-0x603001ff]
[    2.180000] pci 0000:03:00.0: BAR 4: no space for [io  size 0x0020]
[    2.180000] pci 0000:03:00.0: BAR 4: failed to assign [io  size 0x0020]
[    2.190000] pci 0000:03:00.0: BAR 0: no space for [io  size 0x0008]
[    2.190000] pci 0000:03:00.0: BAR 0: failed to assign [io  size 0x0008]
[    2.200000] pci 0000:03:00.0: BAR 2: no space for [io  size 0x0008]
[    2.210000] pci 0000:03:00.0: BAR 2: failed to assign [io  size 0x0008]
[    2.210000] pci 0000:03:00.0: BAR 1: no space for [io  size 0x0004]
[    2.220000] pci 0000:03:00.0: BAR 1: failed to assign [io  size 0x0004]
[    2.230000] pci 0000:03:00.0: BAR 3: no space for [io  size 0x0004]
[    2.230000] pci 0000:03:00.0: BAR 3: failed to assign [io  size 0x0004]
[    2.240000] pci 0000:00:02.0: PCI bridge to [bus 03]
[    2.240000] pci 0000:00:02.0:   bridge window [mem
0x60300000-0x603fffff]
[    2.250000] pci 0000:00:02.0:   bridge window [mem 0x60400000-0x604fffff
pref]
[    2.260000] BAR0 at slot 0 = 0
[    2.260000] bus=0x0, slot = 0x0
[    2.260000] BAR0 at slot 1 = 0
[    2.270000] bus=0x0, slot = 0x1
[    2.270000] BAR0 at slot 2 = 0
[    2.270000] bus=0x0, slot = 0x2
[    2.280000] bus=0x1, slot = 0x0, irq=0xff
[    2.280000] bus=0x2, slot = 0x1, irq=0xff
[    2.280000] bus=0x3, slot = 0x2, irq=0x0
[    2.290000] clocksource: Switched to clocksource GIC
[    2.300000] NET: Registered protocol family 2
[    2.310000] TCP established hash table entries: 2048 (order: 1, 8192
bytes)
[    2.310000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    2.320000] TCP: Hash tables configured (established 2048 bind 2048)
[    2.330000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.330000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.340000] NET: Registered protocol family 1
[    2.340000] PCI: CLS 80 bytes, default 32
[    2.340000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[    2.340000] futex hash table entries: 1024 (order: 3, 32768 bytes)
[    2.360000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.360000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.370000] bounce: pool size: 64 pages
[    2.380000] io scheduler noop registered
[    2.380000] io scheduler deadline registered (default)
[    2.390000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.400000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    2.400000] console [ttyS0] disabled
[    2.400000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 33,
base_baud = 3125000) is a 16550A
[    2.410000] console [ttyS0] enabled
[    2.420000] bootconsole [early0] disabled
[    2.420000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys
error
[    2.430000] pinctrl core: add 1 pinctrl maps
[    2.430000] rt2880-pinmux pinctrl: found group selector 9 for spi
[    2.430000] rt2880-pinmux pinctrl: request pin 34 (io34) for
1e000b00.spi
[    2.430000] rt2880-pinmux pinctrl: request pin 35 (io35) for
1e000b00.spi
[    2.430000] rt2880-pinmux pinctrl: request pin 36 (io36) for
1e000b00.spi
[    2.430000] rt2880-pinmux pinctrl: request pin 37 (io37) for
1e000b00.spi
[    2.430000] rt2880-pinmux pinctrl: request pin 38 (io38) for
1e000b00.spi
[    2.430000] rt2880-pinmux pinctrl: request pin 39 (io39) for
1e000b00.spi
[    2.430000] rt2880-pinmux pinctrl: request pin 40 (io40) for
1e000b00.spi
[    2.430000] spi-mt7621 1e000b00.spi: sys_freq: 50000000
[    2.440000] m25p80 spi32766.0: using chunked io (size=32)
[    2.440000] m25p80 spi32766.0: w25q128 (16384 Kbytes)
[    2.450000] 4 ofpart partitions found on MTD device spi32766.0
[    2.450000] Creating 4 MTD partitions on "spi32766.0":
[    2.460000] 0x000000000000-0x000000030000 : "u-boot"
[    2.470000] 0x000000030000-0x000000040000 : "u-boot-env"
[    2.470000] 0x000000040000-0x000000050000 : "factory"
[    2.480000] 0x000000050000-0x000001000000 : "firmware"
[    2.510000] 2 uimage-fw partitions found on MTD device firmware
[    2.520000] 0x000000050000-0x0000001c468e : "kernel"
[    2.520000] 0x0000001c468e-0x000001000000 : "rootfs"
[    2.530000] mtd: device 5 (rootfs) set to be root filesystem
[    2.540000] 1 squashfs-split partitions found on MTD device rootfs
[    2.540000] 0x0000004d0000-0x000001000000 : "rootfs_data"
[    2.550000] netif_napi_add() called with weight 128 on device eth%d
[    2.570000] libphy: mdio: probed
[    2.580000] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    2.590000] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at
0xbe100000, irq 10
[    2.600000] mt7621_wdt 1e000100.wdt: Initialized
[    2.600000] NET: Registered protocol family 10
[    2.610000] NET: Registered protocol family 17
[    2.620000] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[    2.630000] 8021q: 802.1Q VLAN Support v1.8
[    2.630000] hctosys: unable to open rtc device (rtc0)
[    2.640000] UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19
[    2.650000] VFS: Mounted root (squashfs filesystem) readonly on device
31:5.
[    2.660000] Freeing unused kernel memory: 232K (80466000 - 804a0000)
[    2.840000] random: nonblocking pool is initialized
[    3.720000] init: Console is alive
[    3.730000] init: - watchdog -
[    4.470000] usbcore: registered new interface driver usbfs
[    4.480000] usbcore: registered new interface driver hub
[    4.480000] usbcore: registered new device driver usb
[    4.500000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    4.500000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus
number 1
[    4.510000] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version
0x96 quirks 0x00210010
[    4.520000] xhci-mtk 1e1c0000.xhci: irq 29, io mem 0x1e1c0000
[    4.530000] usb usb1: no of_node; not parsing pinctrl DT
[    4.530000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[    4.530000] hub 1-0:1.0: USB hub found
[    4.530000] hub 1-0:1.0: 2 ports detected
[    4.540000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    4.540000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus
number 2
[    4.550000] usb usb2: We don't know the algorithms for LPM for this
host, disabling LPM.
[    4.560000] usb usb2: no of_node; not parsing pinctrl DT
[    4.560000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
[    4.560000] hub 2-0:1.0: USB hub found
[    4.560000] hub 2-0:1.0: 1 port detected
[    4.580000] init: - preinit -
[    8.120000] jffs2: notice: (383) jffs2_build_xattr_subsystem: complete
building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref
(0 dead, 0 orphan) fou
nd.
[    8.140000] mount_root: switching to jffs2 overlay
[    8.170000] procd: - early -
[    8.180000] procd: - watchdog -
[    8.820000] procd: - ubus -
[    8.910000] procd: - init -
[    9.480000] tun: Universal TUN/TAP device driver, 1.6
[    9.480000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    9.490000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.500000] Loading modules backported from Linux version
v4.4-rc5-1913-gc8fdf68
[    9.510000] Backport generated by backports.git
backports-20151218-0-g2f58d9d
[    9.550000] mt76x2e 0000:02:00.0: ASIC revision: 76120044
[    9.580000] ROM patch already applied
[    9.580000] Firmware Version: 0.0.00
[    9.580000] Build: 1
[    9.590000] Build Time: 201507311614____
[    9.610000] Firmware running!
[    9.610000] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
[    9.610000] mt7603e 0000:01:00.0: ASIC revision: 76030010
[   11.730000] mt7603e 0000:01:00.0: Firmware Version: _mt7603mp
[   11.740000] mt7603e 0000:01:00.0: Build Time: 20151020155902
[   11.780000] firmware init done
[   11.950000] ieee80211 phy1: Selected rate control algorithm
'minstrel_ht'
[   12.010000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.020000] nf_conntrack version 0.5.0 (8038 buckets, 32152 max)
[   12.150000] xt_time: kernel timezone is -0000
[   12.160000] PPP generic driver version 2.4.2
[   12.160000] NET: Registered protocol family 24
[   16.310000] device eth0.1 entered promiscuous mode
[   16.320000] device eth0 entered promiscuous mode
[   16.330000] br-lan: port 1(eth0.1) entered forwarding state



On Fri, Apr 29, 2016 at 6:49 AM, Outback Dingo <outbackdingo@gmail.com>
wrote:

> my mt7621  AP arrived today, ill be checking it out, also note i found
> this....
>
> https://mqmaker.com/
>
> On Tue, Apr 26, 2016 at 6:48 AM, Outback Dingo <outbackdingo@gmail.com>
> wrote:
>
>> https://detail.1688.com/offer/1277654521.html
>>
>> same specs same device 330 RMB... i just ordered one....
>>
>> On Tue, Apr 26, 2016 at 6:23 AM, Outback Dingo <outbackdingo@gmail.com>
>> wrote:
>>
>>> this is the same device
>>> http://www.zbtlink.com/products/router/ZBT-WG2926.html
>>>
>>> On Tue, Apr 26, 2016 at 6:13 AM, Outback Dingo <outbackdingo@gmail.com>
>>> wrote:
>>>
>>>> NO my wife says its 340 rmb... like less then 60 USD
>>>>
>>>> On Tue, Apr 26, 2016 at 6:02 AM, Dave Taht <dave.taht@gmail.com> wrote:
>>>>
>>>>> 340 bucks each, am I reading it right?
>>>>>
>>>>> as data sheets go, that's not bad (there are more in that dir), but
>>>>> what I wanted was the register sets for the wifi and cpu chips.
>>>>>
>>>>> On Mon, Apr 25, 2016 at 8:57 PM, Outback Dingo <outbackdingo@gmail.com>
>>>>> wrote:
>>>>> > router itself
>>>>> >
>>>>> http://cn.made-in-china.com/showroom/szzbtdz/product-detailUMVJbARKZCkv/ZBT-WG3526%E6%99%BA%E5%8D%9A%E9%80%9A%E9%AB%98%E7%AB%AF%E5%8F%8C%E9%A2%91%E5%A4%A7%E5%8A%9F%E7%8E%87%E6%99%BA%E8%83%BD%E6%97%A0%E7%BA%BF%E8%B7%AF%E7%94%B1%E5%99%A8%E5%AE%9A%E5%88%B6OEM.html
>>>>> >
>>>>> > chip set http://ftp.mqmaker.com/WiTi/Docs/Hardware/MT7621.pdf
>>>>> >
>>>>> > On Tue, Apr 26, 2016 at 4:38 AM, Dave Taht <dave.taht@gmail.com>
>>>>> wrote:
>>>>> >>
>>>>> >> detailed documentation on the chipset would be nice... in any
>>>>> language....
>>>>> >>
>>>>> >> On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo <
>>>>> outbackdingo@gmail.com>
>>>>> >> wrote:
>>>>> >> > guys,
>>>>> >> >
>>>>> >> > I am in china right now, i can probably source this in a day, let
>>>>> me
>>>>> >> > know if
>>>>> >> > you want me to get one for you and ill forward it, im going to
>>>>> try to
>>>>> >> > order
>>>>> >> > one today for myself
>>>>> >> >
>>>>> >> > On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com>
>>>>> wrote:
>>>>> >> >>
>>>>> >> >> Please send 1 mediatek router (and pcie card when you get 'em)
>>>>> to:
>>>>> >> >>
>>>>> >> >> Dave Taht & Lorna Reed
>>>>> >> >> 225 11th Ave apt 302
>>>>> >> >> San Francisco, Ca, 94118-2167
>>>>> >> >>
>>>>> >> >> I don't think I have time for the usb version.
>>>>> >> >>
>>>>> >> >> I am standardizing on this for my upcoming work. It's pretty darn
>>>>> >> >> libre, perhaps you could become a reseller of this also....
>>>>> >> >>
>>>>> >> >> http://pcengines.ch/apu2c4.htm
>>>>> >> >>
>>>>> >> >> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
>>>>> >> >> <chris@thinkpenguin.com> wrote:
>>>>> >> >> > On 2016-04-25 06:37 PM, Dave Taht wrote:
>>>>> >> >> >>
>>>>> >> >> >>
>>>>> >> >> >>
>>>>> >> >> >>
>>>>> >> >> >>
>>>>> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
>>>>> >> >> >>
>>>>> >> >> >> chris, you get anything in worth hacking on yet?
>>>>> >> >> >
>>>>> >> >> >
>>>>> >> >> > Yes- I think so. Didn't I send an email about this already? I
>>>>> don't
>>>>> >> >> > think
>>>>> >> >> > anyone responded though. Or maybe I failed to read the
>>>>> responses. I
>>>>> >> >> > asked if
>>>>> >> >> > anybody would like me to send them a mediatek chipset based
>>>>> router
>>>>> >> >> > board. If
>>>>> >> >> > people did email me please let me know again who you are. I
>>>>> know we
>>>>> >> >> > didn't
>>>>> >> >> > send out any of the router boards. I got 5 of them I believe.
>>>>> >> >> >
>>>>> >> >> > I'm currently flying back from the [GNU]LinuxFest North West
>>>>> event...
>>>>> >> >> > but if
>>>>> >> >> > people provide me addresses I can send out some sample router
>>>>> boards
>>>>> >> >> > to
>>>>> >> >> > start playing with.
>>>>> >> >> >
>>>>> >> >> > I also got some USB mediatek chipset based wifi dongles in as
>>>>> well I
>>>>> >> >> > believe. I forget how many of these I got. I also am brining
>>>>> in some
>>>>> >> >> > PCIE
>>>>> >> >> > mediatek cards theoretically although I'm unsure if we're
>>>>> actually
>>>>> >> >> > getting
>>>>> >> >> > our hands on these. I think the orders might have been
>>>>> canceled or
>>>>> >> >> > something- or maybe I just didn't follow up on checking the
>>>>> goods
>>>>> >> >> > shipped.
>>>>> >> >>
>>>>> >> >>
>>>>> >> >>
>>>>> >> >> --
>>>>> >> >> Dave Täht
>>>>> >> >> Let's go make home routers and wifi faster! With better software!
>>>>> >> >> http://blog.cerowrt.org
>>>>> >> >> _______________________________________________
>>>>> >> >> Cerowrt-devel mailing list
>>>>> >> >> Cerowrt-devel@lists.bufferbloat.net
>>>>> >> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>>>> >> >
>>>>> >> >
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >> --
>>>>> >> Dave Täht
>>>>> >> Let's go make home routers and wifi faster! With better software!
>>>>> >> http://blog.cerowrt.org
>>>>> >
>>>>> >
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Dave Täht
>>>>> Let's go make home routers and wifi faster! With better software!
>>>>> http://blog.cerowrt.org
>>>>>
>>>>
>>>>
>>>
>>
>

[-- Attachment #2: Type: text/html, Size: 38999 bytes --]

Re: [Cerowrt-devel] more mt7621 gear

[Outback Dingo]

[-- Attachment #1: Type: text/plain, Size: 32976 bytes --]

here is an atheros based device that looks pretty nice also ...

http://en.comfast.com.cn/product/SmartRepeater/item-217.html

On Sun, May 1, 2016 at 3:45 PM, Outback Dingo <outbackdingo@gmail.com>
wrote:

> So this i finally got this ZBT-WG3526 seems a decent little device Costs
> $60 USD, did get around to building an OpenWRT image on it and flashed it
> this morning.  installed openvpn and luci web ui ... looks pretty good so
> far, and havient had any issues with the latest OpenWRT trunk on it. Seems
> everything is wortking quite nicely.
> Status
> System
> Hostname OpenWrt
> Model ZBT-WG3526
> Firmware Version OpenWrt Designated Driver r49274 / LuCI Master
> (git-16.117.68571-313e325)
> Kernel Version 4.4.7
> Local Time Sun May 1 05:12:20 2016
> Uptime 3h 32m 42s
> Load Average 0.03, 0.02, 0.05
> Memory
> Total Available
> 479112 kB / 514464 kB (93%)
> Free
> 476044 kB / 514464 kB (92%)
> Buffered
> 3068 kB / 514464 kB (0%)
> 
> dmesg
> [    0.000000] Linux version 4.4.7 (dingo@localhost.localdomain) (gcc
> version 5.3.0 (OpenWrt GCC 5.3.0 r49274) ) #3 SMP Sun May 1 01:08:55 UTC
> 2016
> [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
> [    0.000000] bootconsole [early0] enabled
> [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
> [    0.000000] MIPS: machine is ZBT-WG3526
> [    0.000000] Determined physical RAM map:
> [    0.000000]  memory: 1c000000 @ 00000000 (usable)
> [    0.000000]  memory: 04000000 @ 20000000 (usable)
> [    0.000000] Initrd not found or empty - disabling initrd
> [    0.000000] Zone ranges:
> [    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
> [    0.000000]   HighMem  [mem 0x0000000010000000-0x0000000023ffffff]
> [    0.000000] Movable zone start for each node
> [    0.000000] Early memory node ranges
> [    0.000000]   node   0: [mem 0x0000000000000000-0x000000001bffffff]
> [    0.000000]   node   0: [mem 0x0000000020000000-0x0000000023ffffff]
> [    0.000000] Initmem setup node 0 [mem
> 0x0000000000000000-0x0000000023ffffff]
> [    0.000000] On node 0 totalpages: 131072
> [    0.000000] free_area_init_node: node 0, pgdat 8044cfe0, node_mem_map
> 81000000
> [    0.000000]   Normal zone: 512 pages used for memmap
> [    0.000000]   Normal zone: 0 pages reserved
> [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
> [    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
> [    0.000000] VPE topology {2,2} total 4
> [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
> bytes.
> [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
> 32 bytes
> [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
> [    0.000000] PERCPU: Embedded 10 pages/cpu @8148d000 s8416 r8192 d24352
> u40960
> [    0.000000] pcpu-alloc: s8416 r8192 d24352 u40960 alloc=10*4096
> [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 130560
> [    0.000000] Kernel command line: console=ttyS0,115200
> rootfstype=squashfs,jffs2
> [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
> [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
> bytes)
> [    0.000000] Writing ErrCtl register=0004621a
> [    0.000000] Readback ErrCtl register=0004621a
> [    0.000000] Memory: 514232K/524288K available (3508K kernel code, 163K
> rwdata, 820K rodata, 232K init, 248K bss, 10056K reserved, 0K cma-reserved,
> 262144K highmem)
> [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000] NR_IRQS:256
> [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles:
> 0xcaf478abb4, max_idle_ns: 440795247997 ns
> [    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns,
> wraps every 21474836475000000ns
> [    0.060000] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
> [    0.070000] pid_max: default: 32768 minimum: 301
> [    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
> [    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
> bytes)
> [    0.080000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
> bytes.
> [    0.080000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
> 32 bytes
> [    0.080000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
> [    0.090000] CPU1 revision is: 0001992f (MIPS 1004Kc)
> [    0.170000] Synchronize counters for CPU 1: done.
> [    0.170000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
> bytes.
> [    0.170000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
> 32 bytes
> [    0.170000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
> [    0.170000] CPU2 revision is: 0001992f (MIPS 1004Kc)
> [    0.250000] Synchronize counters for CPU 2: done.
> [    0.250000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
> bytes.
> [    0.250000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
> 32 bytes
> [    0.250000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
> [    0.250000] CPU3 revision is: 0001992f (MIPS 1004Kc)
> [    0.330000] Synchronize counters for CPU 3: done.
> [    0.330000] Brought up 4 CPUs
> [    0.340000] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 19112604462750000 ns
> [    0.350000] pinctrl core: initialized pinctrl subsystem
> [    0.350000] NET: Registered protocol family 16
> [    0.360000] rt2880-pinmux pinctrl: try to register 61 pins ...
> [    0.360000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 47 (io47) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 48 (io48) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 49 (io49) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 50 (io50) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 51 (io51) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 52 (io52) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 53 (io53) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 54 (io54) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 55 (io55) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 56 (io56) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 57 (io57) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 58 (io58) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 59 (io59) on rt2880-pinmux
> [    0.360000] pinctrl core: registered pin 60 (io60) on rt2880-pinmux
> [    0.360000] pinctrl core: add 5 pinctrl maps
> [    0.360000] rt2880-pinmux pinctrl: found group selector 5 for wdt
> [    0.360000] rt2880-pinmux pinctrl: found group selector 8 for rgmii2
> [    0.360000] rt2880-pinmux pinctrl: invalid group "wdt rst" for function
> "gpio"
> [    0.370000] rt2880-pinmux pinctrl: found group selector 4 for jtag
> [    0.370000] rt2880-pinmux pinctrl: found group selector 7 for mdio
> [    0.370000] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 22 (io22) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 23 (io23) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 24 (io24) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 25 (io25) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 26 (io26) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 27 (io27) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 28 (io28) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 29 (io29) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 30 (io30) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 31 (io31) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 32 (io32) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 33 (io33) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 15 (io15) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 16 (io16) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 20 (io20) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: request pin 21 (io21) for pinctrl
> [    0.370000] rt2880-pinmux pinctrl: failed to lookup the sleep state
> [    0.370000] FPU Affinity set after 11720 emulations
> [    0.400000] pinctrl core: add 1 pinctrl maps
> [    0.400000] rt2880-pinmux pinctrl: found group selector 6 for pcie
> [    0.400000] rt2880-pinmux pinctrl: request pin 19 (io19) for
> 1e140000.pcie
> [    0.400000] pull PCIe RST: RALINK_RSTCTRL = 0
> [    0.700000] release PCIe RST: RALINK_RSTCTRL = 7000000
> [    0.700000] ***** Xtal 40MHz *****
> [    0.710000] release PCIe RST: RALINK_RSTCTRL = 7000000
> [    0.710000] Port 0 N_FTS = 1b102800
> [    0.710000] Port 1 N_FTS = 1b102800
> [    0.720000] Port 2 N_FTS = 1b102800
> [    1.870000]  -> 21007f2
> [    1.870000] PCIE0 enabled
> [    1.870000] PCIE1 enabled
> [    1.880000] PCIE2 enabled
> [    1.880000] PCI host bridge /pcie@1e140000 ranges:
> [    1.880000]  MEM 0x0000000060000000..0x000000006fffffff
> [    1.890000]   IO 0x000000001e160000..0x000000001e16ffff
> [    1.890000] PCI coherence region base: 0x60000000, mask/settings:
> 0xf0000002
> [    1.930000] mt7621_gpio 1e000600.gpio: registering 32 gpios
> [    1.930000] mt7621_gpio 1e000600.gpio: registering 32 gpios
> [    1.940000] mt7621_gpio 1e000600.gpio: registering 32 gpios
> [    1.940000] PCI host bridge to bus 0000:00
> [    1.950000] pci_bus 0000:00: root bus resource [mem
> 0x60000000-0x6fffffff]
> [    1.960000] pci_bus 0000:00: root bus resource [io  0xffffffff]
> [    1.960000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags
> 0x0]
> [    1.970000] pci_bus 0000:00: No busn resource found for root bus, will
> use [bus 00-ff]
> [    1.980000] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
> [    1.980000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
> [    1.980000] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
> [    1.980000] pci 0000:00:00.0: supports D1
> [    1.980000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
> [    1.980000] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
> [    1.980000] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
> [    1.980000] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
> [    1.980000] pci 0000:00:01.0: supports D1
> [    1.980000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
> [    1.980000] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
> [    1.980000] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
> [    1.980000] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x0000ffff]
> [    1.980000] pci 0000:00:02.0: supports D1
> [    1.980000] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
> [    1.980000] pci 0000:00:00.0: bridge configuration invalid ([bus
> 00-00]), reconfiguring
> [    1.980000] pci 0000:00:01.0: bridge configuration invalid ([bus
> 00-00]), reconfiguring
> [    1.990000] pci 0000:00:02.0: bridge configuration invalid ([bus
> 00-00]), reconfiguring
> [    2.000000] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
> [    2.000000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
> [    2.000000] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
> [    2.000000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [    2.000000] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
> [    2.000000] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff
> 64bit]
> [    2.000000] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff
> pref]
> [    2.000000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [    2.000000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
> [    2.000000] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
> [    2.000000] pci 0000:03:00.0: reg 0x10: [io  0x0000-0x0007]
> [    2.000000] pci 0000:03:00.0: reg 0x14: [io  0x0000-0x0003]
> [    2.000000] pci 0000:03:00.0: reg 0x18: [io  0x0000-0x0007]
> [    2.000000] pci 0000:03:00.0: reg 0x1c: [io  0x0000-0x0003]
> [    2.000000] pci 0000:03:00.0: reg 0x20: [io  0x0000-0x001f]
> [    2.000000] pci 0000:03:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
> [    2.000000] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff
> pref]
> [    2.000000] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
> [    2.000000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
> [    2.000000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
> [    2.010000] pci 0000:00:00.0: BAR 0: failed to assign [mem size
> 0x80000000]
> [    2.020000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
> [    2.020000] pci 0000:00:01.0: BAR 0: failed to assign [mem size
> 0x80000000]
> [    2.030000] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
> [    2.040000] pci 0000:00:02.0: BAR 0: failed to assign [mem size
> 0x80000000]
> [    2.040000] pci 0000:00:00.0: BAR 8: assigned [mem
> 0x60000000-0x600fffff]
> [    2.050000] pci 0000:00:01.0: BAR 8: assigned [mem
> 0x60100000-0x601fffff]
> [    2.060000] pci 0000:00:01.0: BAR 9: assigned [mem
> 0x60200000-0x602fffff pref]
> [    2.060000] pci 0000:00:02.0: BAR 8: assigned [mem
> 0x60300000-0x603fffff]
> [    2.070000] pci 0000:00:02.0: BAR 9: assigned [mem
> 0x60400000-0x604fffff pref]
> [    2.080000] pci 0000:00:00.0: BAR 1: assigned [mem
> 0x60500000-0x6050ffff]
> [    2.080000] pci 0000:00:01.0: BAR 1: assigned [mem
> 0x60510000-0x6051ffff]
> [    2.090000] pci 0000:00:02.0: BAR 1: assigned [mem
> 0x60520000-0x6052ffff]
> [    2.100000] pci 0000:00:02.0: BAR 7: no space for [io  size 0x1000]
> [    2.100000] pci 0000:00:02.0: BAR 7: failed to assign [io  size 0x1000]
> [    2.110000] pci 0000:01:00.0: BAR 0: assigned [mem
> 0x60000000-0x600fffff]
> [    2.120000] pci 0000:00:00.0: PCI bridge to [bus 01]
> [    2.120000] pci 0000:00:00.0:   bridge window [mem
> 0x60000000-0x600fffff]
> [    2.130000] pci 0000:02:00.0: BAR 0: assigned [mem
> 0x60100000-0x601fffff 64bit]
> [    2.140000] pci 0000:02:00.0: BAR 6: assigned [mem
> 0x60200000-0x6020ffff pref]
> [    2.140000] pci 0000:00:01.0: PCI bridge to [bus 02]
> [    2.150000] pci 0000:00:01.0:   bridge window [mem
> 0x60100000-0x601fffff]
> [    2.150000] pci 0000:00:01.0:   bridge window [mem
> 0x60200000-0x602fffff pref]
> [    2.160000] pci 0000:03:00.0: BAR 6: assigned [mem
> 0x60400000-0x6040ffff pref]
> [    2.170000] pci 0000:03:00.0: BAR 5: assigned [mem
> 0x60300000-0x603001ff]
> [    2.180000] pci 0000:03:00.0: BAR 4: no space for [io  size 0x0020]
> [    2.180000] pci 0000:03:00.0: BAR 4: failed to assign [io  size 0x0020]
> [    2.190000] pci 0000:03:00.0: BAR 0: no space for [io  size 0x0008]
> [    2.190000] pci 0000:03:00.0: BAR 0: failed to assign [io  size 0x0008]
> [    2.200000] pci 0000:03:00.0: BAR 2: no space for [io  size 0x0008]
> [    2.210000] pci 0000:03:00.0: BAR 2: failed to assign [io  size 0x0008]
> [    2.210000] pci 0000:03:00.0: BAR 1: no space for [io  size 0x0004]
> [    2.220000] pci 0000:03:00.0: BAR 1: failed to assign [io  size 0x0004]
> [    2.230000] pci 0000:03:00.0: BAR 3: no space for [io  size 0x0004]
> [    2.230000] pci 0000:03:00.0: BAR 3: failed to assign [io  size 0x0004]
> [    2.240000] pci 0000:00:02.0: PCI bridge to [bus 03]
> [    2.240000] pci 0000:00:02.0:   bridge window [mem
> 0x60300000-0x603fffff]
> [    2.250000] pci 0000:00:02.0:   bridge window [mem
> 0x60400000-0x604fffff pref]
> [    2.260000] BAR0 at slot 0 = 0
> [    2.260000] bus=0x0, slot = 0x0
> [    2.260000] BAR0 at slot 1 = 0
> [    2.270000] bus=0x0, slot = 0x1
> [    2.270000] BAR0 at slot 2 = 0
> [    2.270000] bus=0x0, slot = 0x2
> [    2.280000] bus=0x1, slot = 0x0, irq=0xff
> [    2.280000] bus=0x2, slot = 0x1, irq=0xff
> [    2.280000] bus=0x3, slot = 0x2, irq=0x0
> [    2.290000] clocksource: Switched to clocksource GIC
> [    2.300000] NET: Registered protocol family 2
> [    2.310000] TCP established hash table entries: 2048 (order: 1, 8192
> bytes)
> [    2.310000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
> [    2.320000] TCP: Hash tables configured (established 2048 bind 2048)
> [    2.330000] UDP hash table entries: 256 (order: 1, 8192 bytes)
> [    2.330000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> [    2.340000] NET: Registered protocol family 1
> [    2.340000] PCI: CLS 80 bytes, default 32
> [    2.340000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
> [    2.340000] futex hash table entries: 1024 (order: 3, 32768 bytes)
> [    2.360000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [    2.360000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
> (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
> [    2.370000] bounce: pool size: 64 pages
> [    2.380000] io scheduler noop registered
> [    2.380000] io scheduler deadline registered (default)
> [    2.390000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
> [    2.400000] serial8250 serial8250: no of_node; not parsing pinctrl DT
> [    2.400000] console [ttyS0] disabled
> [    2.400000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 33,
> base_baud = 3125000) is a 16550A
> [    2.410000] console [ttyS0] enabled
> [    2.420000] bootconsole [early0] disabled
> [    2.420000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys
> error
> [    2.430000] pinctrl core: add 1 pinctrl maps
> [    2.430000] rt2880-pinmux pinctrl: found group selector 9 for spi
> [    2.430000] rt2880-pinmux pinctrl: request pin 34 (io34) for
> 1e000b00.spi
> [    2.430000] rt2880-pinmux pinctrl: request pin 35 (io35) for
> 1e000b00.spi
> [    2.430000] rt2880-pinmux pinctrl: request pin 36 (io36) for
> 1e000b00.spi
> [    2.430000] rt2880-pinmux pinctrl: request pin 37 (io37) for
> 1e000b00.spi
> [    2.430000] rt2880-pinmux pinctrl: request pin 38 (io38) for
> 1e000b00.spi
> [    2.430000] rt2880-pinmux pinctrl: request pin 39 (io39) for
> 1e000b00.spi
> [    2.430000] rt2880-pinmux pinctrl: request pin 40 (io40) for
> 1e000b00.spi
> [    2.430000] spi-mt7621 1e000b00.spi: sys_freq: 50000000
> [    2.440000] m25p80 spi32766.0: using chunked io (size=32)
> [    2.440000] m25p80 spi32766.0: w25q128 (16384 Kbytes)
> [    2.450000] 4 ofpart partitions found on MTD device spi32766.0
> [    2.450000] Creating 4 MTD partitions on "spi32766.0":
> [    2.460000] 0x000000000000-0x000000030000 : "u-boot"
> [    2.470000] 0x000000030000-0x000000040000 : "u-boot-env"
> [    2.470000] 0x000000040000-0x000000050000 : "factory"
> [    2.480000] 0x000000050000-0x000001000000 : "firmware"
> [    2.510000] 2 uimage-fw partitions found on MTD device firmware
> [    2.520000] 0x000000050000-0x0000001c468e : "kernel"
> [    2.520000] 0x0000001c468e-0x000001000000 : "rootfs"
> [    2.530000] mtd: device 5 (rootfs) set to be root filesystem
> [    2.540000] 1 squashfs-split partitions found on MTD device rootfs
> [    2.540000] 0x0000004d0000-0x000001000000 : "rootfs_data"
> [    2.550000] netif_napi_add() called with weight 128 on device eth%d
> [    2.570000] libphy: mdio: probed
> [    2.580000] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
> [    2.590000] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine
> at 0xbe100000, irq 10
> [    2.600000] mt7621_wdt 1e000100.wdt: Initialized
> [    2.600000] NET: Registered protocol family 10
> [    2.610000] NET: Registered protocol family 17
> [    2.620000] bridge: automatic filtering via arp/ip/ip6tables has been
> deprecated. Update your scripts to load br_netfilter if you need this.
> [    2.630000] 8021q: 802.1Q VLAN Support v1.8
> [    2.630000] hctosys: unable to open rtc device (rtc0)
> [    2.640000] UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19
> [    2.650000] VFS: Mounted root (squashfs filesystem) readonly on device
> 31:5.
> [    2.660000] Freeing unused kernel memory: 232K (80466000 - 804a0000)
> [    2.840000] random: nonblocking pool is initialized
> [    3.720000] init: Console is alive
> [    3.730000] init: - watchdog -
> [    4.470000] usbcore: registered new interface driver usbfs
> [    4.480000] usbcore: registered new interface driver hub
> [    4.480000] usbcore: registered new device driver usb
> [    4.500000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
> [    4.500000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned
> bus number 1
> [    4.510000] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version
> 0x96 quirks 0x00210010
> [    4.520000] xhci-mtk 1e1c0000.xhci: irq 29, io mem 0x1e1c0000
> [    4.530000] usb usb1: no of_node; not parsing pinctrl DT
> [    4.530000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
> [    4.530000] hub 1-0:1.0: USB hub found
> [    4.530000] hub 1-0:1.0: 2 ports detected
> [    4.540000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
> [    4.540000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned
> bus number 2
> [    4.550000] usb usb2: We don't know the algorithms for LPM for this
> host, disabling LPM.
> [    4.560000] usb usb2: no of_node; not parsing pinctrl DT
> [    4.560000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
> [    4.560000] hub 2-0:1.0: USB hub found
> [    4.560000] hub 2-0:1.0: 1 port detected
> [    4.580000] init: - preinit -
> [    8.120000] jffs2: notice: (383) jffs2_build_xattr_subsystem: complete
> building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref
> (0 dead, 0 orphan) fou
> nd.
> [    8.140000] mount_root: switching to jffs2 overlay
> [    8.170000] procd: - early -
> [    8.180000] procd: - watchdog -
> [    8.820000] procd: - ubus -
> [    8.910000] procd: - init -
> [    9.480000] tun: Universal TUN/TAP device driver, 1.6
> [    9.480000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [    9.490000] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [    9.500000] Loading modules backported from Linux version
> v4.4-rc5-1913-gc8fdf68
> [    9.510000] Backport generated by backports.git
> backports-20151218-0-g2f58d9d
> [    9.550000] mt76x2e 0000:02:00.0: ASIC revision: 76120044
> [    9.580000] ROM patch already applied
> [    9.580000] Firmware Version: 0.0.00
> [    9.580000] Build: 1
> [    9.590000] Build Time: 201507311614____
> [    9.610000] Firmware running!
> [    9.610000] ieee80211 phy0: Selected rate control algorithm
> 'minstrel_ht'
> [    9.610000] mt7603e 0000:01:00.0: ASIC revision: 76030010
> [   11.730000] mt7603e 0000:01:00.0: Firmware Version: _mt7603mp
> [   11.740000] mt7603e 0000:01:00.0: Build Time: 20151020155902
> [   11.780000] firmware init done
> [   11.950000] ieee80211 phy1: Selected rate control algorithm
> 'minstrel_ht'
> [   12.010000] ip_tables: (C) 2000-2006 Netfilter Core Team
> [   12.020000] nf_conntrack version 0.5.0 (8038 buckets, 32152 max)
> [   12.150000] xt_time: kernel timezone is -0000
> [   12.160000] PPP generic driver version 2.4.2
> [   12.160000] NET: Registered protocol family 24
> [   16.310000] device eth0.1 entered promiscuous mode
> [   16.320000] device eth0 entered promiscuous mode
> [   16.330000] br-lan: port 1(eth0.1) entered forwarding state
>
>
>
> On Fri, Apr 29, 2016 at 6:49 AM, Outback Dingo <outbackdingo@gmail.com>
> wrote:
>
>> my mt7621  AP arrived today, ill be checking it out, also note i found
>> this....
>>
>> https://mqmaker.com/
>>
>> On Tue, Apr 26, 2016 at 6:48 AM, Outback Dingo <outbackdingo@gmail.com>
>> wrote:
>>
>>> https://detail.1688.com/offer/1277654521.html
>>>
>>> same specs same device 330 RMB... i just ordered one....
>>>
>>> On Tue, Apr 26, 2016 at 6:23 AM, Outback Dingo <outbackdingo@gmail.com>
>>> wrote:
>>>
>>>> this is the same device
>>>> http://www.zbtlink.com/products/router/ZBT-WG2926.html
>>>>
>>>> On Tue, Apr 26, 2016 at 6:13 AM, Outback Dingo <outbackdingo@gmail.com>
>>>> wrote:
>>>>
>>>>> NO my wife says its 340 rmb... like less then 60 USD
>>>>>
>>>>> On Tue, Apr 26, 2016 at 6:02 AM, Dave Taht <dave.taht@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> 340 bucks each, am I reading it right?
>>>>>>
>>>>>> as data sheets go, that's not bad (there are more in that dir), but
>>>>>> what I wanted was the register sets for the wifi and cpu chips.
>>>>>>
>>>>>> On Mon, Apr 25, 2016 at 8:57 PM, Outback Dingo <
>>>>>> outbackdingo@gmail.com> wrote:
>>>>>> > router itself
>>>>>> >
>>>>>> http://cn.made-in-china.com/showroom/szzbtdz/product-detailUMVJbARKZCkv/ZBT-WG3526%E6%99%BA%E5%8D%9A%E9%80%9A%E9%AB%98%E7%AB%AF%E5%8F%8C%E9%A2%91%E5%A4%A7%E5%8A%9F%E7%8E%87%E6%99%BA%E8%83%BD%E6%97%A0%E7%BA%BF%E8%B7%AF%E7%94%B1%E5%99%A8%E5%AE%9A%E5%88%B6OEM.html
>>>>>> >
>>>>>> > chip set http://ftp.mqmaker.com/WiTi/Docs/Hardware/MT7621.pdf
>>>>>> >
>>>>>> > On Tue, Apr 26, 2016 at 4:38 AM, Dave Taht <dave.taht@gmail.com>
>>>>>> wrote:
>>>>>> >>
>>>>>> >> detailed documentation on the chipset would be nice... in any
>>>>>> language....
>>>>>> >>
>>>>>> >> On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo <
>>>>>> outbackdingo@gmail.com>
>>>>>> >> wrote:
>>>>>> >> > guys,
>>>>>> >> >
>>>>>> >> > I am in china right now, i can probably source this in a day,
>>>>>> let me
>>>>>> >> > know if
>>>>>> >> > you want me to get one for you and ill forward it, im going to
>>>>>> try to
>>>>>> >> > order
>>>>>> >> > one today for myself
>>>>>> >> >
>>>>>> >> > On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht <dave.taht@gmail.com>
>>>>>> wrote:
>>>>>> >> >>
>>>>>> >> >> Please send 1 mediatek router (and pcie card when you get 'em)
>>>>>> to:
>>>>>> >> >>
>>>>>> >> >> Dave Taht & Lorna Reed
>>>>>> >> >> 225 11th Ave apt 302
>>>>>> >> >> San Francisco, Ca, 94118-2167
>>>>>> >> >>
>>>>>> >> >> I don't think I have time for the usb version.
>>>>>> >> >>
>>>>>> >> >> I am standardizing on this for my upcoming work. It's pretty
>>>>>> darn
>>>>>> >> >> libre, perhaps you could become a reseller of this also....
>>>>>> >> >>
>>>>>> >> >> http://pcengines.ch/apu2c4.htm
>>>>>> >> >>
>>>>>> >> >> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
>>>>>> >> >> <chris@thinkpenguin.com> wrote:
>>>>>> >> >> > On 2016-04-25 06:37 PM, Dave Taht wrote:
>>>>>> >> >> >>
>>>>>> >> >> >>
>>>>>> >> >> >>
>>>>>> >> >> >>
>>>>>> >> >> >>
>>>>>> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
>>>>>> >> >> >>
>>>>>> >> >> >> chris, you get anything in worth hacking on yet?
>>>>>> >> >> >
>>>>>> >> >> >
>>>>>> >> >> > Yes- I think so. Didn't I send an email about this already? I
>>>>>> don't
>>>>>> >> >> > think
>>>>>> >> >> > anyone responded though. Or maybe I failed to read the
>>>>>> responses. I
>>>>>> >> >> > asked if
>>>>>> >> >> > anybody would like me to send them a mediatek chipset based
>>>>>> router
>>>>>> >> >> > board. If
>>>>>> >> >> > people did email me please let me know again who you are. I
>>>>>> know we
>>>>>> >> >> > didn't
>>>>>> >> >> > send out any of the router boards. I got 5 of them I believe.
>>>>>> >> >> >
>>>>>> >> >> > I'm currently flying back from the [GNU]LinuxFest North West
>>>>>> event...
>>>>>> >> >> > but if
>>>>>> >> >> > people provide me addresses I can send out some sample router
>>>>>> boards
>>>>>> >> >> > to
>>>>>> >> >> > start playing with.
>>>>>> >> >> >
>>>>>> >> >> > I also got some USB mediatek chipset based wifi dongles in as
>>>>>> well I
>>>>>> >> >> > believe. I forget how many of these I got. I also am brining
>>>>>> in some
>>>>>> >> >> > PCIE
>>>>>> >> >> > mediatek cards theoretically although I'm unsure if we're
>>>>>> actually
>>>>>> >> >> > getting
>>>>>> >> >> > our hands on these. I think the orders might have been
>>>>>> canceled or
>>>>>> >> >> > something- or maybe I just didn't follow up on checking the
>>>>>> goods
>>>>>> >> >> > shipped.
>>>>>> >> >>
>>>>>> >> >>
>>>>>> >> >>
>>>>>> >> >> --
>>>>>> >> >> Dave Täht
>>>>>> >> >> Let's go make home routers and wifi faster! With better
>>>>>> software!
>>>>>> >> >> http://blog.cerowrt.org
>>>>>> >> >> _______________________________________________
>>>>>> >> >> Cerowrt-devel mailing list
>>>>>> >> >> Cerowrt-devel@lists.bufferbloat.net
>>>>>> >> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>>>>> >> >
>>>>>> >> >
>>>>>> >>
>>>>>> >>
>>>>>> >>
>>>>>> >> --
>>>>>> >> Dave Täht
>>>>>> >> Let's go make home routers and wifi faster! With better software!
>>>>>> >> http://blog.cerowrt.org
>>>>>> >
>>>>>> >
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Dave Täht
>>>>>> Let's go make home routers and wifi faster! With better software!
>>>>>> http://blog.cerowrt.org
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>

[-- Attachment #2: Type: text/html, Size: 39608 bytes --]

Re: [Cerowrt-devel] more mt7621 gear

[Dave Taht]

On Mon, May 2, 2016 at 7:47 PM, Outback Dingo <outbackdingo@gmail.com> wrote:
> here is an atheros based device that looks pretty nice also ...
>
> http://en.comfast.com.cn/product/SmartRepeater/item-217.html

I really hope their engineering is better than their command of
english. There are some hysterical phrases describing their product in
there...

> On Sun, May 1, 2016 at 3:45 PM, Outback Dingo <outbackdingo@gmail.com>
> wrote:
>>
>> So this i finally got this ZBT-WG3526 seems a decent little device Costs
>> $60 USD, did get around to building an OpenWRT image on it and flashed it
>> this morning.  installed openvpn and luci web ui ... looks pretty good so
>> far, and havient had any issues with the latest OpenWRT trunk on it. Seems
>> everything is wortking quite nicely.
>> Status
>> System
>> Hostname OpenWrt
>> Model ZBT-WG3526
>> Firmware Version OpenWrt Designated Driver r49274 / LuCI Master
>> (git-16.117.68571-313e325)
>> Kernel Version 4.4.7
>> Local Time Sun May 1 05:12:20 2016
>> Uptime 3h 32m 42s
>> Load Average 0.03, 0.02, 0.05
>> Memory
>> Total Available
>> 479112 kB / 514464 kB (93%)
>> Free
>> 476044 kB / 514464 kB (92%)
>> Buffered
>> 3068 kB / 514464 kB (0%)
>> 
>> dmesg
>> [    0.000000] Linux version 4.4.7 (dingo@localhost.localdomain) (gcc
>> version 5.3.0 (OpenWrt GCC 5.3.0 r49274) ) #3 SMP Sun May 1 01:08:55 UTC
>> 2016
>> [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
>> [    0.000000] bootconsole [early0] enabled
>> [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
>> [    0.000000] MIPS: machine is ZBT-WG3526
>> [    0.000000] Determined physical RAM map:
>> [    0.000000]  memory: 1c000000 @ 00000000 (usable)
>> [    0.000000]  memory: 04000000 @ 20000000 (usable)
>> [    0.000000] Initrd not found or empty - disabling initrd
>> [    0.000000] Zone ranges:
>> [    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
>> [    0.000000]   HighMem  [mem 0x0000000010000000-0x0000000023ffffff]
>> [    0.000000] Movable zone start for each node
>> [    0.000000] Early memory node ranges
>> [    0.000000]   node   0: [mem 0x0000000000000000-0x000000001bffffff]
>> [    0.000000]   node   0: [mem 0x0000000020000000-0x0000000023ffffff]
>> [    0.000000] Initmem setup node 0 [mem
>> 0x0000000000000000-0x0000000023ffffff]
>> [    0.000000] On node 0 totalpages: 131072
>> [    0.000000] free_area_init_node: node 0, pgdat 8044cfe0, node_mem_map
>> 81000000
>> [    0.000000]   Normal zone: 512 pages used for memmap
>> [    0.000000]   Normal zone: 0 pages reserved
>> [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
>> [    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
>> [    0.000000] VPE topology {2,2} total 4
>> [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
>> 32 bytes
>> [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
>> [    0.000000] PERCPU: Embedded 10 pages/cpu @8148d000 s8416 r8192 d24352
>> u40960
>> [    0.000000] pcpu-alloc: s8416 r8192 d24352 u40960 alloc=10*4096
>> [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
>> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> Total pages: 130560
>> [    0.000000] Kernel command line: console=ttyS0,115200
>> rootfstype=squashfs,jffs2
>> [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
>> [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
>> bytes)
>> [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
>> bytes)
>> [    0.000000] Writing ErrCtl register=0004621a
>> [    0.000000] Readback ErrCtl register=0004621a
>> [    0.000000] Memory: 514232K/524288K available (3508K kernel code, 163K
>> rwdata, 820K rodata, 232K init, 248K bss, 10056K reserved, 0K cma-reserved,
>> 262144K highmem)
>> [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>> [    0.000000] Hierarchical RCU implementation.
>> [    0.000000] NR_IRQS:256
>> [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles:
>> 0xcaf478abb4, max_idle_ns: 440795247997 ns
>> [    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns,
>> wraps every 21474836475000000ns
>> [    0.060000] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
>> [    0.070000] pid_max: default: 32768 minimum: 301
>> [    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
>> [    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
>> bytes)
>> [    0.080000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [    0.080000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
>> 32 bytes
>> [    0.080000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
>> [    0.090000] CPU1 revision is: 0001992f (MIPS 1004Kc)
>> [    0.170000] Synchronize counters for CPU 1: done.
>> [    0.170000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [    0.170000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
>> 32 bytes
>> [    0.170000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
>> [    0.170000] CPU2 revision is: 0001992f (MIPS 1004Kc)
>> [    0.250000] Synchronize counters for CPU 2: done.
>> [    0.250000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
>> bytes.
>> [    0.250000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize
>> 32 bytes
>> [    0.250000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
>> [    0.250000] CPU3 revision is: 0001992f (MIPS 1004Kc)
>> [    0.330000] Synchronize counters for CPU 3: done.
>> [    0.330000] Brought up 4 CPUs
>> [    0.340000] clocksource: jiffies: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 19112604462750000 ns
>> [    0.350000] pinctrl core: initialized pinctrl subsystem
>> [    0.350000] NET: Registered protocol family 16
>> [    0.360000] rt2880-pinmux pinctrl: try to register 61 pins ...
>> [    0.360000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 47 (io47) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 48 (io48) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 49 (io49) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 50 (io50) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 51 (io51) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 52 (io52) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 53 (io53) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 54 (io54) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 55 (io55) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 56 (io56) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 57 (io57) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 58 (io58) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 59 (io59) on rt2880-pinmux
>> [    0.360000] pinctrl core: registered pin 60 (io60) on rt2880-pinmux
>> [    0.360000] pinctrl core: add 5 pinctrl maps
>> [    0.360000] rt2880-pinmux pinctrl: found group selector 5 for wdt
>> [    0.360000] rt2880-pinmux pinctrl: found group selector 8 for rgmii2
>> [    0.360000] rt2880-pinmux pinctrl: invalid group "wdt rst" for function
>> "gpio"
>> [    0.370000] rt2880-pinmux pinctrl: found group selector 4 for jtag
>> [    0.370000] rt2880-pinmux pinctrl: found group selector 7 for mdio
>> [    0.370000] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 22 (io22) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 23 (io23) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 24 (io24) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 25 (io25) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 26 (io26) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 27 (io27) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 28 (io28) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 29 (io29) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 30 (io30) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 31 (io31) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 32 (io32) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 33 (io33) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 15 (io15) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 16 (io16) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 20 (io20) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: request pin 21 (io21) for pinctrl
>> [    0.370000] rt2880-pinmux pinctrl: failed to lookup the sleep state
>> [    0.370000] FPU Affinity set after 11720 emulations
>> [    0.400000] pinctrl core: add 1 pinctrl maps
>> [    0.400000] rt2880-pinmux pinctrl: found group selector 6 for pcie
>> [    0.400000] rt2880-pinmux pinctrl: request pin 19 (io19) for
>> 1e140000.pcie
>> [    0.400000] pull PCIe RST: RALINK_RSTCTRL = 0
>> [    0.700000] release PCIe RST: RALINK_RSTCTRL = 7000000
>> [    0.700000] ***** Xtal 40MHz *****
>> [    0.710000] release PCIe RST: RALINK_RSTCTRL = 7000000
>> [    0.710000] Port 0 N_FTS = 1b102800
>> [    0.710000] Port 1 N_FTS = 1b102800
>> [    0.720000] Port 2 N_FTS = 1b102800
>> [    1.870000]  -> 21007f2
>> [    1.870000] PCIE0 enabled
>> [    1.870000] PCIE1 enabled
>> [    1.880000] PCIE2 enabled
>> [    1.880000] PCI host bridge /pcie@1e140000 ranges:
>> [    1.880000]  MEM 0x0000000060000000..0x000000006fffffff
>> [    1.890000]   IO 0x000000001e160000..0x000000001e16ffff
>> [    1.890000] PCI coherence region base: 0x60000000, mask/settings:
>> 0xf0000002
>> [    1.930000] mt7621_gpio 1e000600.gpio: registering 32 gpios
>> [    1.930000] mt7621_gpio 1e000600.gpio: registering 32 gpios
>> [    1.940000] mt7621_gpio 1e000600.gpio: registering 32 gpios
>> [    1.940000] PCI host bridge to bus 0000:00
>> [    1.950000] pci_bus 0000:00: root bus resource [mem
>> 0x60000000-0x6fffffff]
>> [    1.960000] pci_bus 0000:00: root bus resource [io  0xffffffff]
>> [    1.960000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags
>> 0x0]
>> [    1.970000] pci_bus 0000:00: No busn resource found for root bus, will
>> use [bus 00-ff]
>> [    1.980000] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
>> [    1.980000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
>> [    1.980000] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
>> [    1.980000] pci 0000:00:00.0: supports D1
>> [    1.980000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
>> [    1.980000] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
>> [    1.980000] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
>> [    1.980000] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
>> [    1.980000] pci 0000:00:01.0: supports D1
>> [    1.980000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
>> [    1.980000] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
>> [    1.980000] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
>> [    1.980000] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x0000ffff]
>> [    1.980000] pci 0000:00:02.0: supports D1
>> [    1.980000] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
>> [    1.980000] pci 0000:00:00.0: bridge configuration invalid ([bus
>> 00-00]), reconfiguring
>> [    1.980000] pci 0000:00:01.0: bridge configuration invalid ([bus
>> 00-00]), reconfiguring
>> [    1.990000] pci 0000:00:02.0: bridge configuration invalid ([bus
>> 00-00]), reconfiguring
>> [    2.000000] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
>> [    2.000000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
>> [    2.000000] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>> [    2.000000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
>> [    2.000000] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
>> [    2.000000] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff
>> 64bit]
>> [    2.000000] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff
>> pref]
>> [    2.000000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>> [    2.000000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
>> [    2.000000] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
>> [    2.000000] pci 0000:03:00.0: reg 0x10: [io  0x0000-0x0007]
>> [    2.000000] pci 0000:03:00.0: reg 0x14: [io  0x0000-0x0003]
>> [    2.000000] pci 0000:03:00.0: reg 0x18: [io  0x0000-0x0007]
>> [    2.000000] pci 0000:03:00.0: reg 0x1c: [io  0x0000-0x0003]
>> [    2.000000] pci 0000:03:00.0: reg 0x20: [io  0x0000-0x001f]
>> [    2.000000] pci 0000:03:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
>> [    2.000000] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff
>> pref]
>> [    2.000000] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
>> [    2.000000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
>> [    2.000000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
>> [    2.010000] pci 0000:00:00.0: BAR 0: failed to assign [mem size
>> 0x80000000]
>> [    2.020000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
>> [    2.020000] pci 0000:00:01.0: BAR 0: failed to assign [mem size
>> 0x80000000]
>> [    2.030000] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
>> [    2.040000] pci 0000:00:02.0: BAR 0: failed to assign [mem size
>> 0x80000000]
>> [    2.040000] pci 0000:00:00.0: BAR 8: assigned [mem
>> 0x60000000-0x600fffff]
>> [    2.050000] pci 0000:00:01.0: BAR 8: assigned [mem
>> 0x60100000-0x601fffff]
>> [    2.060000] pci 0000:00:01.0: BAR 9: assigned [mem
>> 0x60200000-0x602fffff pref]
>> [    2.060000] pci 0000:00:02.0: BAR 8: assigned [mem
>> 0x60300000-0x603fffff]
>> [    2.070000] pci 0000:00:02.0: BAR 9: assigned [mem
>> 0x60400000-0x604fffff pref]
>> [    2.080000] pci 0000:00:00.0: BAR 1: assigned [mem
>> 0x60500000-0x6050ffff]
>> [    2.080000] pci 0000:00:01.0: BAR 1: assigned [mem
>> 0x60510000-0x6051ffff]
>> [    2.090000] pci 0000:00:02.0: BAR 1: assigned [mem
>> 0x60520000-0x6052ffff]
>> [    2.100000] pci 0000:00:02.0: BAR 7: no space for [io  size 0x1000]
>> [    2.100000] pci 0000:00:02.0: BAR 7: failed to assign [io  size 0x1000]
>> [    2.110000] pci 0000:01:00.0: BAR 0: assigned [mem
>> 0x60000000-0x600fffff]
>> [    2.120000] pci 0000:00:00.0: PCI bridge to [bus 01]
>> [    2.120000] pci 0000:00:00.0:   bridge window [mem
>> 0x60000000-0x600fffff]
>> [    2.130000] pci 0000:02:00.0: BAR 0: assigned [mem
>> 0x60100000-0x601fffff 64bit]
>> [    2.140000] pci 0000:02:00.0: BAR 6: assigned [mem
>> 0x60200000-0x6020ffff pref]
>> [    2.140000] pci 0000:00:01.0: PCI bridge to [bus 02]
>> [    2.150000] pci 0000:00:01.0:   bridge window [mem
>> 0x60100000-0x601fffff]
>> [    2.150000] pci 0000:00:01.0:   bridge window [mem
>> 0x60200000-0x602fffff pref]
>> [    2.160000] pci 0000:03:00.0: BAR 6: assigned [mem
>> 0x60400000-0x6040ffff pref]
>> [    2.170000] pci 0000:03:00.0: BAR 5: assigned [mem
>> 0x60300000-0x603001ff]
>> [    2.180000] pci 0000:03:00.0: BAR 4: no space for [io  size 0x0020]
>> [    2.180000] pci 0000:03:00.0: BAR 4: failed to assign [io  size 0x0020]
>> [    2.190000] pci 0000:03:00.0: BAR 0: no space for [io  size 0x0008]
>> [    2.190000] pci 0000:03:00.0: BAR 0: failed to assign [io  size 0x0008]
>> [    2.200000] pci 0000:03:00.0: BAR 2: no space for [io  size 0x0008]
>> [    2.210000] pci 0000:03:00.0: BAR 2: failed to assign [io  size 0x0008]
>> [    2.210000] pci 0000:03:00.0: BAR 1: no space for [io  size 0x0004]
>> [    2.220000] pci 0000:03:00.0: BAR 1: failed to assign [io  size 0x0004]
>> [    2.230000] pci 0000:03:00.0: BAR 3: no space for [io  size 0x0004]
>> [    2.230000] pci 0000:03:00.0: BAR 3: failed to assign [io  size 0x0004]
>> [    2.240000] pci 0000:00:02.0: PCI bridge to [bus 03]
>> [    2.240000] pci 0000:00:02.0:   bridge window [mem
>> 0x60300000-0x603fffff]
>> [    2.250000] pci 0000:00:02.0:   bridge window [mem
>> 0x60400000-0x604fffff pref]
>> [    2.260000] BAR0 at slot 0 = 0
>> [    2.260000] bus=0x0, slot = 0x0
>> [    2.260000] BAR0 at slot 1 = 0
>> [    2.270000] bus=0x0, slot = 0x1
>> [    2.270000] BAR0 at slot 2 = 0
>> [    2.270000] bus=0x0, slot = 0x2
>> [    2.280000] bus=0x1, slot = 0x0, irq=0xff
>> [    2.280000] bus=0x2, slot = 0x1, irq=0xff
>> [    2.280000] bus=0x3, slot = 0x2, irq=0x0
>> [    2.290000] clocksource: Switched to clocksource GIC
>> [    2.300000] NET: Registered protocol family 2
>> [    2.310000] TCP established hash table entries: 2048 (order: 1, 8192
>> bytes)
>> [    2.310000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
>> [    2.320000] TCP: Hash tables configured (established 2048 bind 2048)
>> [    2.330000] UDP hash table entries: 256 (order: 1, 8192 bytes)
>> [    2.330000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
>> [    2.340000] NET: Registered protocol family 1
>> [    2.340000] PCI: CLS 80 bytes, default 32
>> [    2.340000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
>> [    2.340000] futex hash table entries: 1024 (order: 3, 32768 bytes)
>> [    2.360000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>> [    2.360000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
>> (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
>> [    2.370000] bounce: pool size: 64 pages
>> [    2.380000] io scheduler noop registered
>> [    2.380000] io scheduler deadline registered (default)
>> [    2.390000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
>> [    2.400000] serial8250 serial8250: no of_node; not parsing pinctrl DT
>> [    2.400000] console [ttyS0] disabled
>> [    2.400000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 33,
>> base_baud = 3125000) is a 16550A
>> [    2.410000] console [ttyS0] enabled
>> [    2.420000] bootconsole [early0] disabled
>> [    2.420000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys
>> error
>> [    2.430000] pinctrl core: add 1 pinctrl maps
>> [    2.430000] rt2880-pinmux pinctrl: found group selector 9 for spi
>> [    2.430000] rt2880-pinmux pinctrl: request pin 34 (io34) for
>> 1e000b00.spi
>> [    2.430000] rt2880-pinmux pinctrl: request pin 35 (io35) for
>> 1e000b00.spi
>> [    2.430000] rt2880-pinmux pinctrl: request pin 36 (io36) for
>> 1e000b00.spi
>> [    2.430000] rt2880-pinmux pinctrl: request pin 37 (io37) for
>> 1e000b00.spi
>> [    2.430000] rt2880-pinmux pinctrl: request pin 38 (io38) for
>> 1e000b00.spi
>> [    2.430000] rt2880-pinmux pinctrl: request pin 39 (io39) for
>> 1e000b00.spi
>> [    2.430000] rt2880-pinmux pinctrl: request pin 40 (io40) for
>> 1e000b00.spi
>> [    2.430000] spi-mt7621 1e000b00.spi: sys_freq: 50000000
>> [    2.440000] m25p80 spi32766.0: using chunked io (size=32)
>> [    2.440000] m25p80 spi32766.0: w25q128 (16384 Kbytes)
>> [    2.450000] 4 ofpart partitions found on MTD device spi32766.0
>> [    2.450000] Creating 4 MTD partitions on "spi32766.0":
>> [    2.460000] 0x000000000000-0x000000030000 : "u-boot"
>> [    2.470000] 0x000000030000-0x000000040000 : "u-boot-env"
>> [    2.470000] 0x000000040000-0x000000050000 : "factory"
>> [    2.480000] 0x000000050000-0x000001000000 : "firmware"
>> [    2.510000] 2 uimage-fw partitions found on MTD device firmware
>> [    2.520000] 0x000000050000-0x0000001c468e : "kernel"
>> [    2.520000] 0x0000001c468e-0x000001000000 : "rootfs"
>> [    2.530000] mtd: device 5 (rootfs) set to be root filesystem
>> [    2.540000] 1 squashfs-split partitions found on MTD device rootfs
>> [    2.540000] 0x0000004d0000-0x000001000000 : "rootfs_data"
>> [    2.550000] netif_napi_add() called with weight 128 on device eth%d
>> [    2.570000] libphy: mdio: probed
>> [    2.580000] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
>> [    2.590000] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine
>> at 0xbe100000, irq 10
>> [    2.600000] mt7621_wdt 1e000100.wdt: Initialized
>> [    2.600000] NET: Registered protocol family 10
>> [    2.610000] NET: Registered protocol family 17
>> [    2.620000] bridge: automatic filtering via arp/ip/ip6tables has been
>> deprecated. Update your scripts to load br_netfilter if you need this.
>> [    2.630000] 8021q: 802.1Q VLAN Support v1.8
>> [    2.630000] hctosys: unable to open rtc device (rtc0)
>> [    2.640000] UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19
>> [    2.650000] VFS: Mounted root (squashfs filesystem) readonly on device
>> 31:5.
>> [    2.660000] Freeing unused kernel memory: 232K (80466000 - 804a0000)
>> [    2.840000] random: nonblocking pool is initialized
>> [    3.720000] init: Console is alive
>> [    3.730000] init: - watchdog -
>> [    4.470000] usbcore: registered new interface driver usbfs
>> [    4.480000] usbcore: registered new interface driver hub
>> [    4.480000] usbcore: registered new device driver usb
>> [    4.500000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
>> [    4.500000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned
>> bus number 1
>> [    4.510000] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version
>> 0x96 quirks 0x00210010
>> [    4.520000] xhci-mtk 1e1c0000.xhci: irq 29, io mem 0x1e1c0000
>> [    4.530000] usb usb1: no of_node; not parsing pinctrl DT
>> [    4.530000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
>> [    4.530000] hub 1-0:1.0: USB hub found
>> [    4.530000] hub 1-0:1.0: 2 ports detected
>> [    4.540000] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
>> [    4.540000] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned
>> bus number 2
>> [    4.550000] usb usb2: We don't know the algorithms for LPM for this
>> host, disabling LPM.
>> [    4.560000] usb usb2: no of_node; not parsing pinctrl DT
>> [    4.560000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
>> [    4.560000] hub 2-0:1.0: USB hub found
>> [    4.560000] hub 2-0:1.0: 1 port detected
>> [    4.580000] init: - preinit -
>> [    8.120000] jffs2: notice: (383) jffs2_build_xattr_subsystem: complete
>> building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref
>> (0 dead, 0 orphan) fou
>> nd.
>> [    8.140000] mount_root: switching to jffs2 overlay
>> [    8.170000] procd: - early -
>> [    8.180000] procd: - watchdog -
>> [    8.820000] procd: - ubus -
>> [    8.910000] procd: - init -
>> [    9.480000] tun: Universal TUN/TAP device driver, 1.6
>> [    9.480000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>> [    9.490000] ip6_tables: (C) 2000-2006 Netfilter Core Team
>> [    9.500000] Loading modules backported from Linux version
>> v4.4-rc5-1913-gc8fdf68
>> [    9.510000] Backport generated by backports.git
>> backports-20151218-0-g2f58d9d
>> [    9.550000] mt76x2e 0000:02:00.0: ASIC revision: 76120044
>> [    9.580000] ROM patch already applied
>> [    9.580000] Firmware Version: 0.0.00
>> [    9.580000] Build: 1
>> [    9.590000] Build Time: 201507311614____
>> [    9.610000] Firmware running!
>> [    9.610000] ieee80211 phy0: Selected rate control algorithm
>> 'minstrel_ht'
>> [    9.610000] mt7603e 0000:01:00.0: ASIC revision: 76030010
>> [   11.730000] mt7603e 0000:01:00.0: Firmware Version: _mt7603mp
>> [   11.740000] mt7603e 0000:01:00.0: Build Time: 20151020155902
>> [   11.780000] firmware init done
>> [   11.950000] ieee80211 phy1: Selected rate control algorithm
>> 'minstrel_ht'
>> [   12.010000] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [   12.020000] nf_conntrack version 0.5.0 (8038 buckets, 32152 max)
>> [   12.150000] xt_time: kernel timezone is -0000
>> [   12.160000] PPP generic driver version 2.4.2
>> [   12.160000] NET: Registered protocol family 24
>> [   16.310000] device eth0.1 entered promiscuous mode
>> [   16.320000] device eth0 entered promiscuous mode
>> [   16.330000] br-lan: port 1(eth0.1) entered forwarding state
>>
>>
>>
>> On Fri, Apr 29, 2016 at 6:49 AM, Outback Dingo <outbackdingo@gmail.com>
>> wrote:
>>>
>>> my mt7621  AP arrived today, ill be checking it out, also note i found
>>> this....
>>>
>>> https://mqmaker.com/
>>>
>>> On Tue, Apr 26, 2016 at 6:48 AM, Outback Dingo <outbackdingo@gmail.com>
>>> wrote:
>>>>
>>>> https://detail.1688.com/offer/1277654521.html
>>>>
>>>> same specs same device 330 RMB... i just ordered one....
>>>>
>>>> On Tue, Apr 26, 2016 at 6:23 AM, Outback Dingo <outbackdingo@gmail.com>
>>>> wrote:
>>>>>
>>>>> this is the same device
>>>>> http://www.zbtlink.com/products/router/ZBT-WG2926.html
>>>>>
>>>>> On Tue, Apr 26, 2016 at 6:13 AM, Outback Dingo <outbackdingo@gmail.com>
>>>>> wrote:
>>>>>>
>>>>>> NO my wife says its 340 rmb... like less then 60 USD
>>>>>>
>>>>>> On Tue, Apr 26, 2016 at 6:02 AM, Dave Taht <dave.taht@gmail.com>
>>>>>> wrote:
>>>>>>>
>>>>>>> 340 bucks each, am I reading it right?
>>>>>>>
>>>>>>> as data sheets go, that's not bad (there are more in that dir), but
>>>>>>> what I wanted was the register sets for the wifi and cpu chips.
>>>>>>>
>>>>>>> On Mon, Apr 25, 2016 at 8:57 PM, Outback Dingo
>>>>>>> <outbackdingo@gmail.com> wrote:
>>>>>>> > router itself
>>>>>>> >
>>>>>>> > http://cn.made-in-china.com/showroom/szzbtdz/product-detailUMVJbARKZCkv/ZBT-WG3526%E6%99%BA%E5%8D%9A%E9%80%9A%E9%AB%98%E7%AB%AF%E5%8F%8C%E9%A2%91%E5%A4%A7%E5%8A%9F%E7%8E%87%E6%99%BA%E8%83%BD%E6%97%A0%E7%BA%BF%E8%B7%AF%E7%94%B1%E5%99%A8%E5%AE%9A%E5%88%B6OEM.html
>>>>>>> >
>>>>>>> > chip set http://ftp.mqmaker.com/WiTi/Docs/Hardware/MT7621.pdf
>>>>>>> >
>>>>>>> > On Tue, Apr 26, 2016 at 4:38 AM, Dave Taht <dave.taht@gmail.com>
>>>>>>> > wrote:
>>>>>>> >>
>>>>>>> >> detailed documentation on the chipset would be nice... in any
>>>>>>> >> language....
>>>>>>> >>
>>>>>>> >> On Mon, Apr 25, 2016 at 7:16 PM, Outback Dingo
>>>>>>> >> <outbackdingo@gmail.com>
>>>>>>> >> wrote:
>>>>>>> >> > guys,
>>>>>>> >> >
>>>>>>> >> > I am in china right now, i can probably source this in a day,
>>>>>>> >> > let me
>>>>>>> >> > know if
>>>>>>> >> > you want me to get one for you and ill forward it, im going to
>>>>>>> >> > try to
>>>>>>> >> > order
>>>>>>> >> > one today for myself
>>>>>>> >> >
>>>>>>> >> > On Tue, Apr 26, 2016 at 12:49 AM, Dave Taht
>>>>>>> >> > <dave.taht@gmail.com> wrote:
>>>>>>> >> >>
>>>>>>> >> >> Please send 1 mediatek router (and pcie card when you get 'em)
>>>>>>> >> >> to:
>>>>>>> >> >>
>>>>>>> >> >> Dave Taht & Lorna Reed
>>>>>>> >> >> 225 11th Ave apt 302
>>>>>>> >> >> San Francisco, Ca, 94118-2167
>>>>>>> >> >>
>>>>>>> >> >> I don't think I have time for the usb version.
>>>>>>> >> >>
>>>>>>> >> >> I am standardizing on this for my upcoming work. It's pretty
>>>>>>> >> >> darn
>>>>>>> >> >> libre, perhaps you could become a reseller of this also....
>>>>>>> >> >>
>>>>>>> >> >> http://pcengines.ch/apu2c4.htm
>>>>>>> >> >>
>>>>>>> >> >> On Mon, Apr 25, 2016 at 3:43 PM, Christopher Waid
>>>>>>> >> >> <chris@thinkpenguin.com> wrote:
>>>>>>> >> >> > On 2016-04-25 06:37 PM, Dave Taht wrote:
>>>>>>> >> >> >>
>>>>>>> >> >> >>
>>>>>>> >> >> >>
>>>>>>> >> >> >>
>>>>>>> >> >> >>
>>>>>>> >> >> >> https://www.linkedin.com/pulse/mt7621-openwrt-dual-band-5-gigabit-port-router-support-anna-lee
>>>>>>> >> >> >>
>>>>>>> >> >> >> chris, you get anything in worth hacking on yet?
>>>>>>> >> >> >
>>>>>>> >> >> >
>>>>>>> >> >> > Yes- I think so. Didn't I send an email about this already? I
>>>>>>> >> >> > don't
>>>>>>> >> >> > think
>>>>>>> >> >> > anyone responded though. Or maybe I failed to read the
>>>>>>> >> >> > responses. I
>>>>>>> >> >> > asked if
>>>>>>> >> >> > anybody would like me to send them a mediatek chipset based
>>>>>>> >> >> > router
>>>>>>> >> >> > board. If
>>>>>>> >> >> > people did email me please let me know again who you are. I
>>>>>>> >> >> > know we
>>>>>>> >> >> > didn't
>>>>>>> >> >> > send out any of the router boards. I got 5 of them I believe.
>>>>>>> >> >> >
>>>>>>> >> >> > I'm currently flying back from the [GNU]LinuxFest North West
>>>>>>> >> >> > event...
>>>>>>> >> >> > but if
>>>>>>> >> >> > people provide me addresses I can send out some sample router
>>>>>>> >> >> > boards
>>>>>>> >> >> > to
>>>>>>> >> >> > start playing with.
>>>>>>> >> >> >
>>>>>>> >> >> > I also got some USB mediatek chipset based wifi dongles in as
>>>>>>> >> >> > well I
>>>>>>> >> >> > believe. I forget how many of these I got. I also am brining
>>>>>>> >> >> > in some
>>>>>>> >> >> > PCIE
>>>>>>> >> >> > mediatek cards theoretically although I'm unsure if we're
>>>>>>> >> >> > actually
>>>>>>> >> >> > getting
>>>>>>> >> >> > our hands on these. I think the orders might have been
>>>>>>> >> >> > canceled or
>>>>>>> >> >> > something- or maybe I just didn't follow up on checking the
>>>>>>> >> >> > goods
>>>>>>> >> >> > shipped.
>>>>>>> >> >>
>>>>>>> >> >>
>>>>>>> >> >>
>>>>>>> >> >> --
>>>>>>> >> >> Dave Täht
>>>>>>> >> >> Let's go make home routers and wifi faster! With better
>>>>>>> >> >> software!
>>>>>>> >> >> http://blog.cerowrt.org
>>>>>>> >> >> _______________________________________________
>>>>>>> >> >> Cerowrt-devel mailing list
>>>>>>> >> >> Cerowrt-devel@lists.bufferbloat.net
>>>>>>> >> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>>>>>> >> >
>>>>>>> >> >
>>>>>>> >>
>>>>>>> >>
>>>>>>> >>
>>>>>>> >> --
>>>>>>> >> Dave Täht
>>>>>>> >> Let's go make home routers and wifi faster! With better software!
>>>>>>> >> http://blog.cerowrt.org
>>>>>>> >
>>>>>>> >
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Dave Täht
>>>>>>> Let's go make home routers and wifi faster! With better software!
>>>>>>> http://blog.cerowrt.org
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>



-- 
Dave Täht
Let's go make home routers and wifi faster! With better software!
http://blog.cerowrt.org