Re: [Cerowrt-devel] IPv6 doesn't work as well with 3.3.8-17

[Dave Taht <dave.taht@gmail.com>]

post your radvd.conf file, please.

On Fri, Aug 24, 2012 at 6:23 PM, Richard Brown
<richard.e.brown@dartware.com> wrote:
> More testing...
>
> I can get sw10 to work (to hand out an IPv6 address), but my MacBook doesn't get an IPv6 address when plugged into se00 (the wired interface). I have appended the /etc/config/network file that I'm using.
>
> I get the same result if the last two lines are changed to:
>
>         list adv_interface 'se00'
>         list adv_interface 'sw10'
>
> [To reprise, I'm trying to use the script at http://www.bufferbloat.net/projects/cerowrt/wiki/IPv6_Tunnel to configure all the HE.net tunnel parameters automatically. That script gives an error "command failed: Device or resource busy (-16)" after it handles sw00 and gw00, and then again after it does sw10 and gw10. I also get these errors when I "/etc/init.d/network restart" with the config file below.]
>
> Any suggestions? Thanks.
>
> Rich Brown
> Hanover, NH USA
>
> =======================================
> root@OpenWrt:~# cat /etc/config/network
>
> config interface 'loopback'
>         option ifname 'lo'
>         option proto 'static'
>         option ipaddr '127.0.0.1'
>         option netmask '255.0.0.0'
>
> config interface 'se00'
>         option ifname 'se00'
>         option proto 'static'
>         option ipaddr '172.30.42.1'
>         option netmask '255.255.255.224'
>         option ip6addr '2001:470:8a63:100::1/64'
>
> config interface 'ge00'
>         option ifname 'ge00'
>         option proto 'dhcp'
>
> config interface 'sw00'
>         option type 'none'
>         option proto 'static'
>         option ipaddr '172.30.42.65'
>         option netmask '255.255.255.224'
>         option ip6addr '2001:470:8a63:300::1/64'
>
> config interface 'sw10'
>         option type 'none'
>         option proto 'static'
>         option ipaddr '172.30.42.97'
>         option netmask '255.255.255.224'
>         option ip6addr '2001:470:8a63:200::1/64'
>
> config switch
>         option name 'rtl8366s'
>         option reset '1'
>         option enable_vlan '0'
>         option blinkrate '2'
>         option max_length '3'
>
> config switch_vlan
>         option device 'rtl8366s'
>         option vlan '1'
>         option ports '0 1 2 3 5t'
>
> config switch_port
>         option device 'rtl8366s'
>         option port '1'
>         option led '6'
>
> config switch_port
>         option device 'rtl8366s'
>         option port '2'
>         option led '9'
>
> config switch_port
>         option device 'rtl8366s'
>         option port '5'
>         option led '2'
>
> config interface 'gw00'
>         option type 'none'
>         option proto 'static'
>         option ipaddr '172.30.42.129'
>         option netmask '255.255.255.224'
>         option ip6addr '2001:470:8a63:400::1/64'
>
> config interface 'gw10'
>         option type 'none'
>         option proto 'static'
>         option ipaddr '172.30.42.161'
>         option netmask '255.255.255.224'
>         option ip6addr '2001:470:8a63:500::1/64'
>
> config interface 'gw01'
>         option proto 'ahcp'
>         option ip6addr '2001:470:8a63:600::1/64'
>
> config interface 'gw11'
>         option proto 'ahcp'
>         option ip6addr '2001:470:8a63:700::1/64'
>
> config interface 'henet'
>         option proto '6in4'
>         option peeraddr '209.51.161.14'
>         option ip6addr '2001:470:1f06:64::2/64'
>         option tunnelid 'dddddd'
>         option username 'YOUR-USERNAME'
>         option password 'YOUR-PASSWORD'
>         option adv_subnet '1'
>         option adv_interface 'se00'
>         option adv_interface 'sw10'
>
>
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel



-- 
Dave Täht
http://www.bufferbloat.net/projects/cerowrt/wiki - "3.3.8-17 is out
with fq_codel!"