From: Dave Taht <dave.taht@gmail.com>
To: Fred Stratton <fredstratton@imap.cc>
Cc: "cerowrt-devel@lists.bufferbloat.net"
<cerowrt-devel@lists.bufferbloat.net>
Subject: Re: [Cerowrt-devel] WNDR alternative for higher capacity
Date: Sun, 9 Feb 2014 11:45:21 -0800 [thread overview]
Message-ID: <CAA93jw5dUjC+vOb-7ubFvnnq6PRHCMZnMCMea7cqU=AGfFw_oA@mail.gmail.com> (raw)
In-Reply-To: <52F7D953.8080909@imap.cc>
The problem I ran into on the NUC's was that all the 802.11ac cards
are presently full-length, and the msata lines had only been run to
the full
length slot rather than the half length ones.
So I'd planned on a tiny msata card and the big fat ath10k card...
http://snapon.lab.bufferbloat.net/~d/blog/nuc.html
It seems likely that msata is configured the same way on this box.
It bothers me to have to use a msata card at all, to do what we want
only needs 16MB of flash, not 16GB of flash. The onboard bios flash
on these x86 boxes is probably getting close to 16MB already...
I don't know if the realtek ethernet chips got working BQL support yet.
On Sun, Feb 9, 2014 at 11:38 AM, Fred Stratton <fredstratton@imap.cc> wrote:
> http://www.amazon.co.uk/Shuttle-Ultra-DS47-Barebone-System/dp/B00DK06L6O
>
> Clicking on the pictures reveals a Realtek half-height wireless card.
>
>
>
> On 09/02/14 19:18, Toke Høiland-Jørgensen wrote:
>
> Dave Taht <dave.taht@gmail.com> writes:
>
> At the moment what I think I'm trying to do is divide the problem in
> half, find a decent X86 based box with mini-pcie support, and solve
> the gigE problem that way, and the wifi problem separately.
>
> Right, I was getting that impression.
>
> The cost goes way up... The closest I've found so far to what I wanted
> was the latest nuc with sata support. Still want two hardwired
> ethernet ports which it doesn't have....
>
> Actually, the Shuttle DS47 barebone seems to fit the bill on that score:
> http://global.shuttle.com/products/productsDetail?productId=1718
>
> It's a celeron sandy bridge chip on the NM70 express chipset. Two
> minipcie slots, one half size and one full size. It comes with a wlan
> card in the half-size port, but can't find anywhere where it says which
> one. Also it has a slot for a 2.5" drive (so you don't have to use the
> big minipcie for msata), and dual Realtek 8111G Gbit ethernet. Even has
> two external serial ports. The only thing missing is external antennae,
> I think.
>
> Also not *that* pricey (compared to other x86 boxes). I can get it for
> ~$290 retail here in Sweden (without disk and RAM)... Was going to go
> for that unless someone comes up with a better idea :)
>
> -Toke
>
>
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
>
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
--
Dave Täht
Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html
next prev parent reply other threads:[~2014-02-09 19:45 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-08 21:22 Toke Høiland-Jørgensen
2014-02-08 22:45 ` Dave Taht
2014-02-08 23:22 ` Toke Høiland-Jørgensen
2014-02-08 23:32 ` Fred Stratton
2014-02-09 17:22 ` Bill Merriam
2014-02-09 18:51 ` Toke Høiland-Jørgensen
2014-02-09 19:06 ` Dave Taht
2014-02-09 19:18 ` Toke Høiland-Jørgensen
2014-02-09 19:38 ` Fred Stratton
2014-02-09 19:43 ` Fred Stratton
2014-02-09 19:45 ` Dave Taht [this message]
2014-02-09 19:56 ` Toke Høiland-Jørgensen
2014-02-09 20:10 ` Dave Taht
2014-02-10 13:14 ` Rich Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/cerowrt-devel.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAA93jw5dUjC+vOb-7ubFvnnq6PRHCMZnMCMea7cqU=AGfFw_oA@mail.gmail.com' \
--to=dave.taht@gmail.com \
--cc=cerowrt-devel@lists.bufferbloat.net \
--cc=fredstratton@imap.cc \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox