From: Dave Taht <dave.taht@gmail.com>
To: cake@lists.bufferbloat.net,
"cerowrt-devel@lists.bufferbloat.net"
<cerowrt-devel@lists.bufferbloat.net>
Subject: [Cerowrt-devel] openwrt build with latest cake and other qdiscs
Date: Tue, 5 May 2015 01:50:53 -0700 [thread overview]
Message-ID: <CAA93jw6PG3zGJG16TKQOH7cYDt_c8yJNJ5Xd1E+rmo6p2dGfTg@mail.gmail.com> (raw)
get it from: http://snapon.lab.bufferbloat.net/~cero3/cake/ar71xx/
Not tested on the 3800 yet, only tested on the archer c7v2. I am about
to make my gf's main link run this to see what happens...
* General notes
** This is NOT cerowrt. Device naming is std openrt, firewall std
openwrt, bridged wifi/ethnet, etc. This is basically an attempt at
testing cake, dnssec, etc.
** Unlike the openwrt chaos calmer nightlies this has the gui pre-installed
(note that it has both the ssl and non ssl version for no reason I
can figure out)
** babel is installed but not enabled on any interface
** numerous other limitations
* archer notes
** You need to opkg update; opkg install kmod-ath10k # and reboot
(then configure the wifi interfaces as desired)
** sqm defaults to the wrong wan interface for this device
** ath10k does not seem to have working adhoc support (thus no babel over
5ghz)
--
Dave Täht
Open Networking needs **Open Source Hardware**
https://plus.google.com/u/0/+EricRaymond/posts/JqxCe2pFr67
next reply other threads:[~2015-05-05 8:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-05 8:50 Dave Taht [this message]
2015-05-05 12:40 ` Rich Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/cerowrt-devel.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAA93jw6PG3zGJG16TKQOH7cYDt_c8yJNJ5Xd1E+rmo6p2dGfTg@mail.gmail.com \
--to=dave.taht@gmail.com \
--cc=cake@lists.bufferbloat.net \
--cc=cerowrt-devel@lists.bufferbloat.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox