Development issues regarding the cerowrt test router project
 help / color / mirror / Atom feed
From: Dave Taht <dave.taht@gmail.com>
To: cerowrt-devel <cerowrt-devel@lists.bufferbloat.net>
Subject: [Cerowrt-devel] Fwd: [Babel-users] ANNOUNCE: babeld-1.12
Date: Thu, 5 May 2022 06:54:45 -0700	[thread overview]
Message-ID: <CAA93jw6qhr-XnQWeGopdj4s2FahTZ7NVfrH7zzbEBD4_Tuh0Vw@mail.gmail.com> (raw)
In-Reply-To: <87r1582ngp.wl-jch@irif.fr>

I really like the 4 over 6 thing

---------- Forwarded message ---------
From: Juliusz Chroboczek <jch@irif.fr>
Date: Thu, May 5, 2022 at 5:06 AM
Subject: [Babel-users] ANNOUNCE: babeld-1.12
To: <babel-users@lists.alioth.debian.org>


Dear all,

Babeld 1.12 is available from

  https://www.irif.fr/~jch/software/files/babeld-1.12.tar.gz
  https://www.irif.fr/~jch/software/files/babeld-1.12.tar.gz.asc

For more information about the Babel routing protocol, please see

  https://www.irif.fr/~jch/software/babel/

This version implements v4-via-v6 routing, which allows an IPv6-only
router to route IPv4 completely transparently.  The work is due to
Théophile Bastian, Toke Høyland-Jørgensen, and myself.  The protocol is
described in RFC 9229, which has not been published yet; in the meantime,
you may find the final draft at

  https://datatracker.ietf.org/doc/html/draft-ietf-babel-v4viav6-08

V4-via-v6 is enabled by default on Linux kernel 5.13 and later, which may
cause issues in your network:

  - IPv6-only routers will suddently start routing IPv4; if you rely on
    IPv6-only routers to isolate you from the IPv4 Internet, this will no
    longer work.  Please set up filtering rules and firewalls if you wish
    to be isolated from the Internet.

  - IPv6-only routers will suddenly start sending ICMPv4 messages using
    the IPv4 "dummy address" 192.0.0.8; please make sure your firewall
    rules let through ICMPv4 packets with source equal to 192.0.0.8 lest
    you suffer from PMTUD blackholes.  (This applies even if you're not
    running Babel itself: filtering ICMPv4 packet-too-big is almost always
    a mistake.)

The full changelog follows.

5 May 2022: babeld-1.12

  * Implement v4-via-v6 routing (RFC 9229), which allows a router with
    IPv4 addresses only to route IPv4.  Thanks to Théophile Bastian.
  * Enable extended Netlink acks when available.
    Thanks to Toke Høyland-Jørgensen.
  * Fix restoring of interface configuration to avoid unbounded memory
    consumption.  Thanks to andrew-hoff.
  * Fix handling of deny filters in the install chain.

-- Juliusz


_______________________________________________
Babel-users mailing list
Babel-users@alioth-lists.debian.net
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/babel-users


-- 
FQ World Domination pending: https://blog.cerowrt.org/post/state_of_fq_codel/
Dave Täht CEO, TekLibre, LLC

           reply	other threads:[~2022-05-05 13:54 UTC|newest]

Thread overview: expand[flat|nested]  mbox.gz  Atom feed
 [parent not found: <87r1582ngp.wl-jch@irif.fr>]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

  List information: https://lists.bufferbloat.net/postorius/lists/cerowrt-devel.lists.bufferbloat.net/

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAA93jw6qhr-XnQWeGopdj4s2FahTZ7NVfrH7zzbEBD4_Tuh0Vw@mail.gmail.com \
    --to=dave.taht@gmail.com \
    --cc=cerowrt-devel@lists.bufferbloat.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox