Dear fred: are you sticking with pie? I was going to suggest you try fq codel with a target 25ms on your outbound. (You are at 800kbit or so as best I recall?)
I upgraded to 3.10.24-8 on 2013-12-23.
I modified /etc/fixdaemons, adding
/etc/init.d/sqm restart
input the appropriate sqm settings, transcribed from aqm
rebooted
and the build works very well. For ADSL2+ here, it is the best so far.
On 27/12/13 18:55, Dave Taht wrote:
A race condition appears to have crept in...
---------- Forwarded message ----------
From: "Dave Taht" <dave.taht@gmail.com>
Date: Dec 27, 2013 10:47 AM
Subject: Re: [Cerowrt-devel] CeroWrt 3.10.24-8 badly bloated?
To: "Richard E. Brown" <richb.hanover@gmail.com>
Cc:
Probably didn't start sqm properly
Restart it by hand via /etc/init.d/sqm restart
tc -s qdisc show dev ge00
Should show htb and fq codel.
On Dec 27, 2013 10:36 AM, "Rich Brown" <richb.hanover@gmail.com> wrote:
So I screwed up my courage and replaced my 3.10.18-? firmware in my primary router with 3.10.24-8. That version had worked well as a secondary, so I figured, What the heck… Let’s give it try.
The result was not pretty. I set my link speeds in the SQM page, chose the defaults for the Queue Discipline tab, and link layer to ATM with no additional overhead for my DSL link.
Ping times to google are normally ~51-54 msec. But when I fired up speedtest.net, they jumped to 1500-2500 msec. Is there something I should look at before reverting? Thanks.
Rich
_______________________________________________
Cerowrt-devel mailing list
Cerowrt-devel@lists.bufferbloat.net
https://lists.bufferbloat.net/listinfo/cerowrt-devel
_______________________________________________ Cerowrt-devel mailing list Cerowrt-devel@lists.bufferbloat.net https://lists.bufferbloat.net/listinfo/cerowrt-devel