all: Could you post the generated dnsmasq.conf file and your network file and cc steven barth? On Fri, Jan 18, 2013 at 10:26 AM, Dave Taht wrote: > There are multiple threads on the stateless dhcp and dhcp implementation > going on here: > > http://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2013q1/thread.html > > among other things, "enable-ra" should be getting set in the generated > dnsmasq conf file and probably isn't right now. Perhaps it can be manually > set? > > I'm hoping ipv6 support isn't mission critical for anyone? I really wasn't > planning on A) breaking it, or B) fixing it - this week. I DO care about > exercising the ipv6 portion of the stack a lot though, there are still a > few new instruction traps left to kill in the kernel (see bug 419) > > (dhcpv6 support also has trouble - can't even assign the delegated prefix) > > On Fri, Jan 18, 2013 at 8:23 AM, Richard Brown > wrote: > >> Dave, Maciej, >> >> On Jan 17, 2013, at 4:47 PM, < >> cerowrt-devel-request@lists.bufferbloat.net> wrote: >> >> On Thu, Jan 17, 2013 at 1:45 PM, Maciej Soltysiak >> wrote: >> >>> Hi, I configured he.net tunnel according to >>> http://wiki.openwrt.org/doc/uci/network6 and works with latest 3.7.2-4. >>> >>> However I don't understand how my client is supposed get an ip6 address. >>> radvd is gone and I don't see anything handing out me an ip6 addr. Who's >>> job is it now then? >>> >> >> dnsmasq is supposed to do the job now, but the configuration via openwrt's >> config is in flux. There is documentation floating about on >> dnsmasq-discuss as well as inside the the dnsmasq-2.66test10 tarball on how >> to do it at the command line.... >> >> >> I have the same problem with 3.7.2-4: my HE.net connection works fine, >> CeroWrt gets the expected global IPv6 addresses, and each of the five >> interfaces (not but not the babel ones) get nice routed global addresses >> allocated from my /48. >> >> But my Mac (using either wired or wireless) doesn't get a v6 address. >> Do you have any links to the dnsmasq documentation (a quick google didn't >> turn up anything.) Thanks. >> >> Rich >> >> _______________________________________________ >> Cerowrt-devel mailing list >> Cerowrt-devel@lists.bufferbloat.net >> https://lists.bufferbloat.net/listinfo/cerowrt-devel >> >> > > > -- > Dave Täht > > Fixing bufferbloat with cerowrt: > http://www.teklibre.com/cerowrt/subscribe.html > -- Dave Täht Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html