Well Stephen I did tried that with a guide from the forums of dsl reports
as they have a guide about various router configuration and it's trade offs
for them and I have tried the double bridge but it seems like it does not
work because when I tried the Internet and go on Web pages it works and all
but when I tried to use on demand on the stb it says that your stb is
offline and I power cycle them for the stb to get a refresh of the ip
address because they always requesting the ip of 192.168.1.100. But I might
try again with the guide you gave me and report back on my findings.

And Dave I am currently using cero that way, the WAN port of cero is
connected through the Lan port of the actiontec but if I try to bridge the
actiontec I will lose on demand.

http://www.dslreports.com/faq/16077

That's the Web page that has the various router configuration and it's
trade offs. And I was trying to do the one where I plug the Ethernet cable
from the ONT to cero WAN port and plug another cable from cero WAN port to
the Lan port of the actiontec
On Mar 19, 2014 1:43 AM, "Dave Taht" <dave.taht@gmail.com> wrote:

> The wan port of cero should be plugged into the the lan port of the
> actiontec,
> not the reverse.
>
> You probably want to configure the actiontec as a bridge in this instance
> if it isn't already.
>
> On Tue, Mar 18, 2014 at 9:34 PM, Ernesto Elias <ernestogelias@gmail.com>
> wrote:
> > Hello everyone I'm having trouble with the actiontec router supplied by
> > Verizon fios, since I have the bundle service of TV and Internet I need
> the
> > fios router to be able to watch on demand but I ran into a problem. It's
> > that when I made the ont box go Ethernet to be able to use my wndr3800
> > running cerowrt on it to reduce buffer bloat and so I plugged an Ethernet
> > cable to one of the Lan port of the wndr3800 to the WAN port of the
> > actiontec it would seem that the set top boxes don't get a signal and
> when I
> > click on the remote to check diagnostic it says that the external
> network is
> > down and we'll I have question is there anything I have to do special for
> > the actiontec to get Internet connection to the stb?
> >
> >
> > _______________________________________________
> > Cerowrt-devel mailing list
> > Cerowrt-devel@lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/cerowrt-devel
> >
>
>
>
> --
> Dave Täht
>
> Fixing bufferbloat with cerowrt:
> http://www.teklibre.com/cerowrt/subscribe.html
>