Well Stephen I did tried that with a guide from the forums of dsl reports as they have a guide about various router configuration and it's trade offs for them and I have tried the double bridge but it seems like it does not work because when I tried the Internet and go on Web pages it works and all but when I tried to use on demand on the stb it says that your stb is offline and I power cycle them for the stb to get a refresh of the ip address because they always requesting the ip of 192.168.1.100. But I might try again with the guide you gave me and report back on my findings.
And Dave I am currently using cero that way, the WAN port of cero is connected through the Lan port of the actiontec but if I try to bridge the actiontec I will lose on demand.
http://www.dslreports.com/faq/16077
That's the Web page that has the various router configuration and it's trade offs. And I was trying to do the one where I plug the Ethernet cable from the ONT to cero WAN port and plug another cable from cero WAN port to the Lan port of the actiontec
The wan port of cero should be plugged into the the lan port of the actiontec,
not the reverse.
You probably want to configure the actiontec as a bridge in this instance
if it isn't already.
On Tue, Mar 18, 2014 at 9:34 PM, Ernesto Elias <ernestogelias@gmail.com> wrote:
> Hello everyone I'm having trouble with the actiontec router supplied by
> Verizon fios, since I have the bundle service of TV and Internet I need the
> fios router to be able to watch on demand but I ran into a problem. It's
> that when I made the ont box go Ethernet to be able to use my wndr3800
> running cerowrt on it to reduce buffer bloat and so I plugged an Ethernet
> cable to one of the Lan port of the wndr3800 to the WAN port of the
> actiontec it would seem that the set top boxes don't get a signal and when I
> click on the remote to check diagnostic it says that the external network is
> down and we'll I have question is there anything I have to do special for
> the actiontec to get Internet connection to the stb?
>
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
--
Dave Täht
Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html