I installed sugarland again and it made sure that it worked. What is
strange is that when I installed Modena again, I can ping and connect from
sw10 or sw00 to se00 now. Not sure what went wrong the first time.

Thanks for your help Dave.


On Fri, Mar 15, 2013 at 8:11 PM, Dave Taht <dave.taht@gmail.com> wrote:

> ok, that's narrower.
>
> Are you saying that a device on sw10 can't like, access a web page on
> a device on se00?
>
> I'll look at it in the morning.
>
>
>
> On Fri, Mar 15, 2013 at 5:51 PM, Kai Yang <yangk@vt.edu> wrote:
> > dns and internet is fine. I can't ping from sw10 or sw00 to se00.
> >
> >
> > On Fri, Mar 15, 2013 at 7:46 PM, Dave Taht <dave.taht@gmail.com> wrote:
> >>
> >> Hmm. Can't ping? How about getting dns or to the internet?
> >>
> >> I confess to haven't not tested the guest interfaces much in this
> >> release, I generally toss them all into the main "secure" list in
> >> /etc/config/firewall, or delete them entirely.
> >>
> >> I will do a fresh install in the morning and see where I goofed. Thx
> >> for your bug report....
> >>
> >> On Fri, Mar 15, 2013 at 5:34 PM, Kai Yang <yangk@vt.edu> wrote:
> >> > I did a fresh install. Even did a reset after the install.
> >> >
> >> >
> >> > On Fri, Mar 15, 2013 at 7:33 PM, Dave Taht <dave.taht@gmail.com>
> wrote:
> >> >>
> >> >> By updated to modena, does that mean you did a sysupgrade and tried
> to
> >> >> keep your old config? That has never been made to work. You need to
> do
> >> >> a fresh install.
> >> >>
> >> >> On Fri, Mar 15, 2013 at 5:31 PM, Kai Yang <yangk@vt.edu> wrote:
> >> >> > Is ping also blocked?
> >> >> >
> >> >> >
> >> >> > On Fri, Mar 15, 2013 at 7:29 PM, Dave Taht <dave.taht@gmail.com>
> >> >> > wrote:
> >> >> >>
> >> >> >> you should have forwarding between those devices. However certain
> >> >> >> ports ar e blocked by default, notably the web configuration
> >> >> >> interface
> >> >> >> and samba.
> >> >> >>
> >> >> >> On Fri, Mar 15, 2013 at 5:27 PM, Kai Yang <yangk@vt.edu> wrote:
> >> >> >> > Just updated to Modena. Now my devices on sw10, sw00 and se00
> >> >> >> > don't
> >> >> >> > have
> >> >> >> > access to the others anymore.
> >> >> >> >
> >> >> >> > Do I need to setup fowarding now? How can I do that?
> >> >> >> >
> >> >> >> > _______________________________________________
> >> >> >> > Cerowrt-devel mailing list
> >> >> >> > Cerowrt-devel@lists.bufferbloat.net
> >> >> >> > https://lists.bufferbloat.net/listinfo/cerowrt-devel
> >> >> >> >
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> --
> >> >> >> Dave Täht
> >> >> >>
> >> >> >> Fixing bufferbloat with cerowrt:
> >> >> >> http://www.teklibre.com/cerowrt/subscribe.html
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Dave Täht
> >> >>
> >> >> Fixing bufferbloat with cerowrt:
> >> >> http://www.teklibre.com/cerowrt/subscribe.html
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> Dave Täht
> >>
> >> Fixing bufferbloat with cerowrt:
> >> http://www.teklibre.com/cerowrt/subscribe.html
> >
> >
>
>
>
> --
> Dave Täht
>
> Fixing bufferbloat with cerowrt:
> http://www.teklibre.com/cerowrt/subscribe.html
>