Re: [Cerowrt-devel] 3.10.18 : no address range available for DHCP request via sw00

Re: [Cerowrt-devel] 3.10.18 : no address range available for DHCP request via sw00

[Jim Reisert AD1C]

On Sat, Nov 16, 2013 at 5:58 PM, Dave Taht <dave.taht@gmail.com> wrote:

>> I just installed 3.10.18 and Samba.  Most of my home network is back
>> together again.
>>
>> In the system log, I'm seeing lots of these messages:
>>
>> Sat Nov 16 18:41:07 2013 daemon.warn dnsmasq-dhcp[1749]: no address
>> range available for DHCP request via sw00
>
> Did you do a clean install?

No, an upgrade from 3.7 or 3.8.  But I just re-did a clean install.
Those messages went away.  Things seem back to relative normal, my
Android phone is connecting to the WiFi again.

I'll keep an eye on it.

-- 
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us

[Cerowrt-devel] 3.10.18 : no address range available for DHCP request via sw00

[Jim Reisert AD1C]

I just installed 3.0.18 and Samba.  Most of my home network is back
together again.

In the system log, I'm seeing lots of these messages:

Sat Nov 16 18:41:07 2013 daemon.warn dnsmasq-dhcp[1749]: no address
range available for DHCP request via sw00

I was seeing these before installing Samba).  I'm not sure what's
causing them.  My Android phone seems to be taking an unusually long
time to get a WiFi connection. Another PC in the house running Windows
7 is having no such problem.

sw00 is my main WiFi port, with my usual SSID.   The protocol is set
to "Static Address", is that correct?  There is no IPV4 gateway
listed. There will be multiple devices in the house connecting to this
network.

Any ideas?

- Jim

-- 
Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us

Re: [Cerowrt-devel] 3.10.18 : no address range available for DHCP request via sw00

[Dave Taht]

On Sat, Nov 16, 2013 at 10:46 AM, Jim Reisert AD1C
<jjreisert@alum.mit.edu> wrote:
> I just installed 3.0.18 and Samba.  Most of my home network is back
> together again.
>
> In the system log, I'm seeing lots of these messages:
>
> Sat Nov 16 18:41:07 2013 daemon.warn dnsmasq-dhcp[1749]: no address
> range available for DHCP request via sw00

Did you do a clean install?

is dnsmasq being restarted in /etc/rc.local?

Does sw00 have an address? (ifconfig sw00)

>
> I was seeing these before installing Samba).  I'm not sure what's
> causing them.  My Android phone seems to be taking an unusually long
> time to get a WiFi connection. Another PC in the house running Windows
> 7 is having no such problem.
>
> sw00 is my main WiFi port, with my usual SSID.   The protocol is set
> to "Static Address", is that correct?  There is no IPV4 gateway
> listed. There will be multiple devices in the house connecting to this
> network.
>
> Any ideas?
>
> - Jim
>
> --
> Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel



-- 
Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html