My Jetway NU93-2930 board is a NUC with dual Ethernet.  It's a bare board, but I made my own case quickly enough out of acrylic sheet using my bandsaw and glue. Works fine.  Takes a wall wart power supply as long as it delivers between 12 V and 36 V.

I recommend it highly.  Jetway probably sells it in a case, as well, but I generally don't like their superexpensive cases.

I added an mSATA drive (which mounts into the board) and RAM.  That's all you need for a router with two GigE ports.  There's also a slot under the mSATA slot for whatever mini-PCIe WLAN card you want - I'm not sure yet what I want to put on it, any suggestions for an 802.11ac capable with either 5 GHz or dual capability?)

On Thursday, March 3, 2016 9:16pm, "Dave Täht" <dave@taht.net> said:

> I am A) still fiddling with alternate web site generators and B) just
> finished writing up (grousing) about all the hardware I just tried to
> make work.
>
> http://the-edge.taht.net/post/hardware_from_hell/
>
> I am about to tear apart the dual ethernet nuc we discussed here, again,
> swapping out everything in it to see if I can get it to work. I fear I
> fried it by trying to compile a kernel on it, or something....
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>


_______________________________________________
Cerowrt-devel mailing list
Cerowrt-devel@lists.bufferbloat.net
https://lists.bufferbloat.net/listinfo/cerowrt-devel