HEnet has been working consistently for me.

In /etc/config/network make sure that se00, sw00, sw10, gw00, gw10, gw01,
and gw11 all have the  following line:
        option ip6assign        64

And add the following using your information to replace the '###' fields,
also remove any earlier configuration for it:

config interface henet
        option proto            6in4
        option peeraddr         ###
        option ip6addr          ###
        option tunnelid         ###
        option username         ###
        option password         ###
        option ip6prefix        ###
        option mtu              1480
        option ttl              64

Finally add henet to the wan zone in /etc/config/firewall

The way to setup custom DNS is also in /etc/config/network, add the
following to you ge00 config:
        option peerdns          0
        option dns              '208.67.222.222 208.67.220.220'

I ran into issues updating to the 3.10.1 build, something got borked with
my configuration. Once I restored a backup, everything was fine (NOTE: this
is an assumption, it could have just been the additional reboot that fixed
the flakeyness). The upgrade to 3.10.2 went quite smoothly for me. If I hit
a problem with the upgrade to 3.10.3 I'll send a followup email.



On Fri, Jul 26, 2013 at 2:21 AM, Fred Stratton <fredstratton@imap.cc> wrote:

> I can certainly confirm this, having spent several fruitless hours with
> the build.
>
> 6in4 remains broken for henet.
>
> dnsmasq appears not to recognise additional domain name servers. The ISP I
> use has a very slow domain name service, to which the system now defaults.
> The consequence of this is that opkg times out, and no packages can be
> installed.
>
> It is still not possible to watch a video stream and download files
> simultaneously on an ADSL line.
>
>
> On 26 Jul 2013, at 06:20, Dave Taht <dave.taht@gmail.com> wrote:
>
> > sysupgrade -n doesn't work with this release. Stay away. I have a new
> > build of 3.10.3-1 and am trying to fix it...
> >
> > I did find the problem on the ubnt builds - I'd switched to the new
> > babeld from quagga, but failed to install it by default.
> >
> > in openwrt trunk, elliptic curve has been enabled in openssl. It's
> > long past time we enable https for configuration by default, and might
> > as well figure out how to turn perfect forward secrecy on as well in
> > the post-snowden era.
> >
> > owamp seemingly works well, with a couple glitches here and there. I
> > got to where the lab was synced to about 1ms resolution... and 5 more
> > gpses arrived today....
> > _______________________________________________
> > Cerowrt-devel mailing list
> > Cerowrt-devel@lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>