Re: [Cerowrt-devel] Forward between wired and wireless devices

[Alijah Ballard <alijahb@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 4028 bytes --]

Okay, I think i have found a clue.

I swapped the os sd card. I was running the xbmc raspi os(it is to be a set
top box). I put in the dev sd card with raspi debian, so i can install babeld.
And ssh was working again.

damn

seems the issue is rasbmc ssh client

thanks for the help
Alijah


On Tue, Apr 30, 2013 at 9:09 AM, Alijah Ballard <alijahb@gmail.com> wrote:

> Sorry, the second email was with my laptop directly connected by Ethernet.
> If both devices are on the same segment (ie, eth, 2.4, 5) I can SSH just
> fine. I might try SSH into router then out to raspi.
> On Apr 30, 2013 9:05 AM, "Dave Taht" <dave.taht@gmail.com> wrote:
>
>> Huh? These two boxes should be able to reach each other, they are on
>> the same lan. They don't?
>>
>> you sure you have openssh installed and no fws on the boxes?
>> openssh-server is not installed by default on ubuntu...
>>
>> sake of argument, try installing babeld
>>
>> On Tue, Apr 30, 2013 at 6:58 AM, Alijah Ballard <alijahb@gmail.com>
>> wrote:
>> > rockape@CavePC:~$ route
>> > Kernel IP routing table
>> > Destination     Gateway         Genmask         Flags Metric Ref    Use
>> > Iface
>> > rockape@CavePC:~$
>> >
>> > pi@raspbmc:~$ route
>> > Kernel IP routing table
>> > Destination     Gateway         Genmask         Flags Metric Ref    Use
>> > Iface
>> > pi@raspbmc:~$
>> >
>> >
>> >
>> > On Tue, Apr 30, 2013 at 8:54 AM, Alijah Ballard <alijahb@gmail.com>
>> wrote:
>> >>
>> >> It will take a bit to get to the raspi. Its in the living room and I
>> need
>> >> a hard wire connection to connect.
>> >>
>> >> One bit.
>> >>
>> >> Alijah
>> >>
>> >>
>> >> On Tue, Apr 30, 2013 at 8:52 AM, Dave Taht <dave.taht@gmail.com>
>> wrote:
>> >>>
>> >>> well, this stuff works, I use it all the time, so there's a problem
>> >>> elsewhere.
>> >>>
>> >>> what's the other box's routing table?
>> >>>
>> >>> On Tue, Apr 30, 2013 at 6:51 AM, Alijah Ballard <alijahb@gmail.com>
>> >>> wrote:
>> >>> > Clean install
>> >>> >
>> >>> >
>> >>> > On Tue, Apr 30, 2013 at 8:50 AM, Dave Taht <dave.taht@gmail.com>
>> wrote:
>> >>> >>
>> >>> >> just out of curiousity, did you do a clean install of the
>> firmware, or
>> >>> >> try to preserve original settings?
>> >>> >>
>> >>> >> On Mon, Apr 29, 2013 at 7:00 PM, Alijah Ballard <alijahb@gmail.com
>> >
>> >>> >> wrote:
>> >>> >> > I have a basic setup. Two laptops, a tower in the closet, and a
>> >>> >> > raspi as
>> >>> >> > a
>> >>> >> > setop box. The raspi is a recent purchase  It is directly
>> connected
>> >>> >> > to
>> >>> >> > my
>> >>> >> > 3800 running CeroWrt Modena 3.7.5-2. I can only connect to other
>> >>> >> > machines
>> >>> >> > that are simultaneously on a particular interface. Like the
>> laptops
>> >>> >> > on
>> >>> >> > 2.4
>> >>> >> > ghz can file share, but can not see the tower on 5 ghz. I really
>> >>> >> > need to
>> >>> >> > ssh
>> >>> >> > into the raspi on eth from 2.4 ghz or 5 ghz. I reinstalled the
>> >>> >> > firmware,
>> >>> >> > and
>> >>> >> > also reset the setting from the system menu.
>> >>> >> >
>> >>> >> > In other news this has greatly improved skype and youtube.
>> >>> >> >
>> >>> >> > Thanks
>> >>> >> > Alijah
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > Cerowrt-devel mailing list
>> >>> >> > Cerowrt-devel@lists.bufferbloat.net
>> >>> >> > https://lists.bufferbloat.net/listinfo/cerowrt-devel
>> >>> >> >
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >> --
>> >>> >> Dave Täht
>> >>> >>
>> >>> >> Fixing bufferbloat with cerowrt:
>> >>> >> http://www.teklibre.com/cerowrt/subscribe.html
>> >>> >
>> >>> >
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> Dave Täht
>> >>>
>> >>> Fixing bufferbloat with cerowrt:
>> >>> http://www.teklibre.com/cerowrt/subscribe.html
>> >>
>> >>
>> >
>>
>>
>>
>> --
>> Dave Täht
>>
>> Fixing bufferbloat with cerowrt:
>> http://www.teklibre.com/cerowrt/subscribe.html
>>
>

[-- Attachment #2: Type: text/html, Size: 7319 bytes --]