Hi Dave,

I finally got around to update from rc6 to bql-40, to try the ATM shaping. The update was a breeze, great work!
	I am sad to report that for my ATM link AQM does not work for me as well as QoS does. My measurement consists out of using ping to get the RTT to the first ISP hop (as taken from trace route) while concurrently saturating the up link with a dropbox upload (which I usually give that a headstart of 10 seconds to go into bandwidth ceiling): AQM gives the same bad avg RTT of 1.2 seconds as no shaping at all does, while QoS gives me an avg RTT of around 24ms (best case RTT is around 13ms on my link, so the link stays pretty useable).
	I tried to apply the same changes to /usr/lib/aqm/generate.sh and /usr/lib/qos/generate.sh to make the them better understand the peculiarities of my ATM adsl1 connection, but it seems I did something wrong for the AQM script since my change does not have any effect there… (both modified files attached). I usually only  shape up- and down-stream to 97% of the line rate, which works ok with QoS. (And all my tests have been done, very unscientifically, using my mac laptop over the 5GHz wireless band of the router… )