Re: [Cerowrt-devel] WNDR3700v4 is out...

[David Lang <david@lang.hm>]

still working on this, but openwrt has gained support for the WNDR4300, and 
reports are that it appears that it's the same board as the WNDR3700v4. The 4300 
is selling for ~$130 so it's a viable option, even if the 3700v4 falls through.

David Lang

  On Sun, 23 Dec 2012, Dave Taht wrote:

> On Sun, Dec 23, 2012 at 2:27 AM, David Lang <david@lang.hm> wrote:
>> On Thu, 20 Dec 2012, Richard Brown wrote:
>>
>>> The wndr3700v4 is out, and appears to be a good hardware upgrade from
>>> the 3800 series, but it's not supported by openwrt yet.
>>>
>>> I took a look at their GPL source distribution. And yea! it's openwrt.
>>> And boo! it's ancient openwrt, for example dnsmasq is 2.39 (current is
>>> 2.64), and their kernel is 2.6.31.
>>>
>>> I think the cpu and ethernet chips tho look a lot better: Atheros
>>> AR9344+ AR9580(5GHz)+AR9344(2.4GHz). It's my hope these do ipv6
>>> better.
>>>
>>> I found a WNDR3700v4 at the local Staples for $99.99. I wasn't brave
>>> enough to buy it. Here's an image of the box so you can recognize it...
>>
>>
>> I've purchased one, but I don't have the openwrt experiance to bootstrap
>> this. I have built my own openwrt images for the 3700v2 and 3800 and have
>> been using Linux since the 0.99 kernel days, so I am very comfortable
>> mucking with kernel compile options.
>>
>> If someone is willing to coach me through the process, I'd be happy to do
>> the experimentation.
>
> I've ordered one too, but I would argue that a concerted effort would
> need to be made on the part of some core #openwrt devs to get it
> anywhere. The cpu is a mips 74k. It's a dual issue core with a very,
> very long pipeline, so although it boasts twice the instructions per
> clock than the 24k, and in simple benchmarks like drystone, rocks,
> that deep pipeline isn't helpful for tons of code. (IMHO). It doesn't
> look like the cache architecture is improved much, either.
>
> It's not clear what the ethernet driver is, there appear to be legal
> issues on the equivalent broadcom ethernet device, and so on, and so
> forth.
>
> You will need, at least, a 3.3v serial port and adaptor, and jtag
> might be needed. If you want to learn about just how painful it is to
> bring up a new board, this is your chance!
>
> It makes sense to start a thread on openwrt-devel about doing the port.
>
> https://forum.openwrt.org/viewtopic.php?id=41092
>
> And/or find some other still supported hardware still being shipped by
> some other manufacturer.
>
> Frankly, if we truly have to jump platforms, I'd rather go arm.
>
>> David Lang
>> _______________________________________________
>> Cerowrt-devel mailing list
>> Cerowrt-devel@lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
>
>
>