* Re: [Codel] Codel Digest, Vol 29, Issue 2
[not found] <mailman.152188.1424355522.1815.codel@lists.bufferbloat.net>
@ 2015-02-19 14:48 ` Anjali Chawla
0 siblings, 0 replies; only message in thread
From: Anjali Chawla @ 2015-02-19 14:48 UTC (permalink / raw)
To: codel
[-- Attachment #1: Type: text/plain, Size: 18780 bytes --]
okay Thanks a lot
:)
On Thu, Feb 19, 2015 at 6:18 AM, <codel-request@lists.bufferbloat.net>
wrote:
> Send Codel mailing list submissions to
> codel@lists.bufferbloat.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.bufferbloat.net/listinfo/codel
> or, via email, send a message with subject or body 'help' to
> codel-request@lists.bufferbloat.net
>
> You can reach the person managing the list at
> codel-owner@lists.bufferbloat.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Codel digest..."
>
>
> Today's Topics:
>
> 1. [Reply] tcl code of CoDel (Anjali Chawla) (Mohit P. Tahiliani)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 19 Feb 2015 19:48:09 +0530
> From: "Mohit P. Tahiliani" <tahiliani.nitk@gmail.com>
> To: codel@lists.bufferbloat.net
> Subject: [Codel] [Reply] tcl code of CoDel (Anjali Chawla)
> Message-ID:
> <
> CA+4Fxsi4R_FJJD1Q3zA+sRYdG1RzAmGt8Z0V6bxgn4YB3BGQxQ@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi Anjali,
>
> You can test CoDel on wired as well as wireless networks.
>
> CoDel's code is available for Linux, ns-2 and ns-3.
>
> See the following link for more details:
>
> http://www.bufferbloat.net/projects/codel/wiki/Wiki/#Simulations
>
> Hope it helps.
>
> Best Regards,
> Mohit P. Tahiliani
>
> On Thu, Feb 19, 2015 at 12:50 PM, <codel-request@lists.bufferbloat.net>
> wrote:
>
> > Send Codel mailing list submissions to
> > codel@lists.bufferbloat.net
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > https://lists.bufferbloat.net/listinfo/codel
> > or, via email, send a message with subject or body 'help' to
> > codel-request@lists.bufferbloat.net
> >
> > You can reach the person managing the list at
> > codel-owner@lists.bufferbloat.net
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of Codel digest..."
> >
> >
> > Today's Topics:
> >
> > 1. tcl code of CoDel (Anjali Chawla)
> > 2. Codel code (kanu monga)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Thu, 19 Feb 2015 11:59:50 +0530
> > From: Anjali Chawla <anjaliachawla013@gmail.com>
> > To: codel@lists.bufferbloat.net
> > Subject: [Codel] tcl code of CoDel
> > Message-ID:
> > <CAL6QuG_pujPYrB6r0gcOhyPUgy6SV0gGFCTfsuQ_i35E=
> > qYsjQ@mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Hi
> > i want to know can we test CoDel with wired network???
> > or should we go for wireless only???
> > anybody please reply because i am new to all this.
> > your suggestions can help me in taking one step further.
> > Thanks
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> https://lists.bufferbloat.net/pipermail/codel/attachments/20150219/5c072359/attachment-0001.html
> > >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Thu, 19 Feb 2015 12:49:34 +0530
> > From: kanu monga <kanumonga013@gmail.com>
> > To: codel@lists.bufferbloat.net
> > Subject: [Codel] Codel code
> > Message-ID:
> > <CAJ0uZqx6aWUTEuHHAn1g--5H3nwQv-mR8GbWD7wubt=
> > H0fB3+g@mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > is there anyone who can help me in understanding tcl code of codel(given
> > below)
> > This one is quite complex for me.
> > please help if you can.
> > Thanks in advance.
> >
> > ###################################################################
> >
> >
> > # ns codel.tcl f w c {b}Mb s d r
> > # where:
> > # f = # ftps
> > # w = # PackMime connections per second
> > # c = # CBRs
> > # b = bottleneck bandwidth in Mbps
> > # s = filesize for ftp, -1 for infinite
> > # d = dynamic bandwidth, if non-zero, changes (kind of kludgey)
> > # have to set the specific change ratios in this file (below)
> > # r = number of "reverse" ftps
> >
> > set stopTime 300
> > set ns [new Simulator]
> >
> > # These are defaults if values not set on command line
> >
> > set num_ftps 1
> > set web_rate 0
> > set revftp 0
> > set num_cbrs 0
> > #rate and packetSize set in build_cbr
> > set bottleneck 3Mb
> > #for a 10MB ftp
> > set filesize 10000000
> > set dynamic_bw 0
> > set greedy 0
> >
> > # Parse command line
> >
> > if {$argc >= 1} {
> > set num_ftps [lindex $argv 0]
> > if {$argc >= 2} {
> > set web_rate [lindex $argv 1]
> > if {$argc >= 3} {
> > set num_cbrs [lindex $argv 2]
> > if {$argc >= 4} {
> > set bottleneck [lindex $argv 3]
> > if {$argc >= 5} {
> > set filesize [lindex $argv 4]
> > if {$argc >= 6} {
> > set dynamic_bw [lindex $argv 5]
> > if {$argc >= 7} {
> > set revftp [lindex $argv 6]
> > }
> > }
> > }
> > }
> > }
> > }
> > }
> >
> > set bw [bw_parse $bottleneck]
> > if { $revftp >= 1} {
> > set num_revs $revftp
> > } else {
> > set num_revs 0
> > }
> > puts "ftps $num_ftps webrate $web_rate cbrs $num_cbrs bw $bw filesize
> > $filesize reverse $num_revs"
> >
> > # experiment settings
> > set psize 1500
> > if { $bw < 1000000} { set psize 500 }
> > set nominal_rtt [delay_parse 100ms]
> > set accessdly 20
> > set bdelay 10
> > set realrtt [expr 2*(2*$accessdly + $bdelay)]
> > puts "accessdly $accessdly bneckdly $bdelay realrtt $realrtt bneckbw $bw"
> >
> > # CoDel values
> > # interval to keep min over
> > set interval [delay_parse 100ms]
> > # target in ms.
> > set target [delay_parse 5ms]
> >
> > global defaultRNG
> > $defaultRNG seed 0
> > ns-random 0
> > #$defaultRNG seed 54321
> > #ns-random 23145
> >
> > # ------- config info is all above this line ----------
> >
> > #bdp in packets, based on the nominal rtt
> > set bdp [expr round($bw*$nominal_rtt/(8*$psize))]
> >
> > Trace set show_tcphdr_ 1
> > set startTime 0.0
> >
> > #TCP parameters - have to set both for FTPs and PackMime
> >
> > Agent/TCP set window_ [expr $bdp*16]
> > Agent/TCP set segsize_ [expr $psize-40]
> > Agent/TCP set packetSize_ [expr $psize-40]
> > Agent/TCP set windowInit_ 4
> > Agent/TCP set segsperack_ 1
> > Agent/TCP set timestamps_ true
> > set delack 0.4
> > Agent/TCP set interval_ $delack
> >
> > Agent/TCP/FullTcp set window_ [expr $bdp*16]
> > Agent/TCP/FullTcp set segsize_ [expr $psize-40]
> > Agent/TCP/FullTcp set packetSize_ [expr $psize-40]
> > Agent/TCP/FullTcp set windowInit_ 4
> > Agent/TCP/FullTcp set segsperack_ 1
> > Agent/TCP/FullTcp set timestamps_ true
> > Agent/TCP/FullTcp set interval_ $delack
> >
> >
> > Agent/TCP/Linux instproc done {} {
> > global ns filesize
> > #this doesn't seem to work, had to hack tcp-linux.cc to do repeat ftps
> > $self set closed_ 0
> > #needs to be delayed by at least .3sec to slow start
> > puts "[$ns now] TCP/Linux proc done called"
> > $ns at [expr [$ns now] + 0.3] "$self send $filesize"
> > }
> >
> > # problem is that idle() in tcp.cc never seems to get called...
> > Application/FTP instproc resume {} {
> > puts "called resume"
> > global filesize
> > $self send $filesize
> > # $ns at [expr [$ns now] + 0.5] "[$self agent] reset"
> > $ns at [expr [$ns now] + 0.5] "[$self agent] send $filesize"
> > }
> >
> > Application/FTP instproc fire {} {
> > global filesize
> > $self instvar maxpkts_
> > set maxpkts_ $filesize
> > [$self agent] set maxpkts_ $filesize
> > $self send $maxpkts_
> > puts "fire() FTP"
> > }
> >
> > #buffersizes
> > set buffersize [expr $bdp]
> > set buffersize1 [expr $bdp*10]
> >
> > Queue/CoDel set target_ $target
> > Queue/CoDel set interval_ $interval
> >
> > #set Flow_id 1
> >
> > proc build_topology { ns } {
> > # nodes n0 and n1 are the server and client side gateways and
> > # the link between them is the congested slow link. n0 -> n1
> > # handles all the server to client traffic.
> > #
> > # if the web_rate is non-zero, node n2 will be the packmime server
> > cloud
> > # and node n3 will be the client cloud.
> > #
> > # num_ftps server nodes and client nodes are created for the ftp
> > sessions.
> > # the first client node is n{2+w} and the first server node is
> n{2+f+w}
> > # where 'f' is num_ftps and 'w' is 1 if web_rate>0 and 0 otherwise.
> > # servers will be even numbered nodes, clients odd
> > # Warning: the numbering here is ridiculously complicated
> >
> > global bw bdelay accessdly buffersize buffersize1 filesize node_cnt
> > set node_cnt 2
> >
> > # congested link
> > global n0 n1
> > set n0 [$ns node]
> > set n1 [$ns node]
> > $ns duplex-link $n0 $n1 $bw ${bdelay}ms CoDel
> > $ns duplex-link-op $n0 $n1 orient right
> > $ns duplex-link-op $n0 $n1 queuePos 0.5
> > $ns duplex-link-op $n1 $n0 queuePos 1.5
> > $ns queue-limit $n0 $n1 $buffersize
> > $ns queue-limit $n1 $n0 $buffersize
> > set node_cnt 2
> >
> > #dynamic bandwidth
> > # these are the multipliers for changing bw, times initial set bw
> > # edit these values to get different patterns
> > global stopTime dynamic_bw
> > array names bw_changes
> > set bw_changes(1) 0.1
> > set bw_changes(2) 0.01
> > set bw_changes(3) 0.5
> > set bw_changes(4) 0.01
> > set bw_changes(5) 1.0
> >
> > puts "bottleneck starts at [[[$ns link $n0 $n1] link] set
> > bandwidth_]bps"
> > for {set k 1} {$k <= $dynamic_bw} {incr k 1} {
> > set changeTime [expr $k*$stopTime/($dynamic_bw+1)]
> > set f $bw_changes($k)
> > set newBW [expr $f*$bw]
> > puts "change at $changeTime to [expr $newBW/1000000.]Mbps"
> > $ns at $changeTime "[[$ns link $n0 $n1] link] set bandwidth_ $newBW"
> > $ns at $changeTime "[[$ns link $n1 $n0] link] set bandwidth_ $newBW"
> > $ns at $changeTime "puts $newBW"
> > }
> >
> > set li_10 [[$ns link $n1 $n0] queue]
> > set li_01 [[$ns link $n0 $n1] queue]
> >
> > set tchan_ [open /tmp/redqvar.tr w]
> > $li_01 trace curq_
> > $li_01 trace d_exp_
> > $li_01 attach $tchan_
> >
> > global num_ftps web_rate num_cbrs greedy num_revs
> > set linkbw [expr $bw*10]
> >
> > set w [expr $web_rate > 0]
> > if {$w} {
> > global n2 n3
> > #server
> > set n2 [$ns node]
> > $ns duplex-link $n2 $n0 $linkbw ${accessdly}ms DropTail
> > $ns queue-limit $n2 $n0 $buffersize1
> > $ns queue-limit $n0 $n2 $buffersize1
> >
> > #client
> > set n3 [$ns node]
> > $ns duplex-link $n1 $n3 $linkbw ${accessdly}ms DropTail
> > $ns queue-limit $n1 $n3 $buffersize1
> > $ns queue-limit $n3 $n1 $buffersize1
> > set node_cnt 4
> > }
> > #need to fix the angles if use nam
> > for {set k 0} {$k < $num_ftps} {incr k 1} {
> > # servers
> > set j $node_cnt
> > global n$j
> > set n$j [$ns node]
> > if {$greedy > 0 && $k == 0} {
> > $ns duplex-link [set n$j] $n0 $linkbw 1ms DropTail
> > } else {
> > $ns duplex-link [set n$j] $n0 $linkbw ${accessdly}ms DropTail
> > }
> > $ns queue-limit [set n$j] $n0 $buffersize1
> > $ns queue-limit $n0 [set n$j] $buffersize1
> > set angle [expr $num_ftps>1? 0.75+($k-1)*.5/($num_ftps-1) : 1]
> > $ns duplex-link-op $n0 [set n$j] orient $angle
> > incr node_cnt
> >
> > # clients
> > set j $node_cnt
> > global n$j
> > set n$j [$ns node]
> > set dly [expr ${accessdly} +($k+1)]
> > $ns duplex-link $n1 [set n$j] $linkbw ${dly}ms DropTail
> > $ns queue-limit $n1 [set n$j] $buffersize1
> > $ns queue-limit [set n$j] $n1 $buffersize1
> > set angle [expr $num_ftps>1? fmod(2.25-($k-1)*.5/($num_ftps-1),
> 2)
> > : 0]
> > $ns duplex-link-op $n1 [set n$j] orient $angle
> > incr node_cnt
> > }
> > for {set k 0} {$k < $num_cbrs} {incr k 1} {
> > # servers
> > set j $node_cnt
> > global n$j
> > set n$j [$ns node]
> > $ns duplex-link [set n$j] $n0 $linkbw ${accessdly}ms DropTail
> > $ns queue-limit [set n$j] $n0 $buffersize1
> > $ns queue-limit $n0 [set n$j] $buffersize1
> > # set angle [expr $num_cbrs>1? 0.75+($k-1)*.5/($num_cbrs-1) : 1]
> > $ns duplex-link-op $n0 [set n$j] orient $angle
> > incr node_cnt
> >
> > # clients
> > set j $node_cnt
> > global n$j
> > set n$j [$ns node]
> > $ns duplex-link $n1 [set n$j] $linkbw ${accessdly}ms DropTail
> > $ns queue-limit $n1 [set n$j] $buffersize1
> > $ns queue-limit [set n$j] $n1 $buffersize1
> > # set angle [expr $num_cbrs>1? fmod(2.25-($k-1)*.5/($num_ftps-1),
> 2)
> > : 0]
> > $ns duplex-link-op $n1 [set n$j] orient $angle
> > incr node_cnt
> > }
> > #reverse direction ftps
> > for {set k 0} {$k < $num_revs} {incr k 1} {
> > # clients
> > set j $node_cnt
> > global n$j
> > set n$j [$ns node]
> > $ns duplex-link [set n$j] $n0 $linkbw ${accessdly}ms DropTail
> > $ns queue-limit [set n$j] $n0 $buffersize1
> > $ns queue-limit $n0 [set n$j] $buffersize1
> > set angle [expr $num_ftps>1? 0.75+($k-1)*.5/($num_ftps-1) : 1]
> > $ns duplex-link-op $n0 [set n$j] orient $angle
> > incr node_cnt
> >
> > # servers
> > set j $node_cnt
> > global n$j
> > set n$j [$ns node]
> > set dly [expr ($accessdly)*1.1 +($k+1)]
> > $ns duplex-link $n1 [set n$j] $linkbw ${dly}ms DropTail
> > $ns queue-limit $n1 [set n$j] $buffersize1
> > $ns queue-limit [set n$j] $n1 $buffersize1
> > set angle [expr $num_ftps>1? fmod(2.25-($k-1)*.5/($num_ftps-1),
> 2)
> > : 0]
> > $ns duplex-link-op $n1 [set n$j] orient $angle
> > incr node_cnt
> > }
> > }
> >
> > proc build_cbr {cnd snd startTime timeToStop Flow_id} {
> > global ns
> > set udp [$ns create-connection UDP $snd LossMonitor $cnd $Flow_id]
> > set cbr [new Application/Traffic/CBR]
> > $cbr attach-agent $udp
> > # change these for different types of CBRs
> > $cbr set packetSize_ 100
> > $cbr set rate_ 0.064Mb
> > $ns at $startTime "$cbr start"
> > $ns at $timeToStop "$cbr stop"
> > }
> >
> > # cnd is client node, snd is server node
> > proc build_ftpclient {cnd snd startTime timeToStop Flow_id} {
> >
> > global ns filesize greedy revftp
> > set ctcp [$ns create-connection TCP/Linux $snd TCPSink/Sack1 $cnd
> > $Flow_id]
> > $ctcp select_ca cubic
> > set ftp [$ctcp attach-app FTP]
> > $ftp set enableResume_ true
> > $ftp set type_ FTP
> >
> > #set up a single infinite ftp with smallest RTT
> > if {$greedy > 0 || $filesize < 0} {
> > $ns at $startTime "$ftp start"
> > set greedy 0
> > } else {
> > $ns at $startTime "$ftp send $filesize"
> > }
> > $ns at $timeToStop "$ftp stop"
> > }
> >
> > proc build_webs {cnd snd rate startTime timeToStop} {
> > set CLIENT 0
> > set SERVER 1
> >
> > # SETUP PACKMIME
> > set pm [new PackMimeHTTP]
> > $pm set-TCP Sack
> > $pm set-client $cnd
> > $pm set-server $snd
> > $pm set-rate $rate; # new connections per second
> > $pm set-http-1.1; # use HTTP/1.1
> >
> > # create RandomVariables
> > set flow_arrive [new RandomVariable/PackMimeHTTPFlowArrive $rate]
> > set req_size [new RandomVariable/PackMimeHTTPFileSize $rate $CLIENT]
> > set rsp_size [new RandomVariable/PackMimeHTTPFileSize $rate $SERVER]
> >
> > # assign RNGs to RandomVariables
> > $flow_arrive use-rng [new RNG]
> > $req_size use-rng [new RNG]
> > $rsp_size use-rng [new RNG]
> >
> > # set PackMime variables
> > $pm set-flow_arrive $flow_arrive
> > $pm set-req_size $req_size
> > $pm set-rsp_size $rsp_size
> >
> > global ns
> > $ns at $startTime "$pm start"
> > $ns at $timeToStop "$pm stop"
> > }
> >
> > proc uniform {a b} {
> > expr $a + (($b- $a) * ([ns-random]*1.0/0x7fffffff))
> > }
> >
> > proc finish {} {
> > global ns
> > $ns halt
> > $ns flush-trace
> > exit 0
> > }
> >
> > # $ns namtrace-all [open out.nam w]
> > # $ns color 2 blue
> > # $ns color 3 red
> > # $ns color 4 yellow
> > # $ns color 5 green
> >
> > build_topology $ns
> >
> > #$ns trace-queue $n0 $n1 [open out_n0ton1.tr w]
> > #set fname f${num_ftps}w${web_rate}b${bottleneck}.tr
> > set fname f.tr
> > puts $fname
> > $ns trace-queue $n0 $n1 [open /tmp/$fname w]
> > #reverse direction
> > #$ns trace-queue $n1 $n0 [open /tmp/$fname w]
> >
> > set node_cnt 2
> > if {$web_rate > 0} {
> > build_webs $n3 $n2 $web_rate 0 $stopTime
> > set node_cnt 4
> > }
> >
> > for {set k 1} {$k <= $num_ftps} {incr k 1} {
> > set j $node_cnt
> > incr node_cnt
> > set i $node_cnt
> > build_ftpclient [set n$i] [set n$j] \
> > $startTime $stopTime $i
> > # [expr 1.0*($k-1)] $stopTime $i
> > # [expr $startTime+($k-1)*[uniform 0.0 2.0]] $stopTime $i
> > incr node_cnt
> > }
> >
> > for {set k 1} {$k <= $num_cbrs} {incr k 1} {
> > set j $node_cnt
> > incr node_cnt
> > set i $node_cnt
> > build_cbr [set n$i] [set n$j] \
> > [expr $startTime+($k-1)*[uniform 0.0 2.0]] $stopTime $i
> > incr node_cnt
> > }
> >
> > #for reverse direction, give client smaller number
> > for {set k 1} {$k <= $num_revs} {incr k 1} {
> > set j $node_cnt
> > incr node_cnt
> > set i $node_cnt
> > build_ftpclient [set n$j] [set n$i] $startTime $stopTime $j
> > incr node_cnt
> > }
> >
> > $ns at [expr $stopTime ] "finish"
> > $ns run
> > exit 0
> > ###################################################################
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> https://lists.bufferbloat.net/pipermail/codel/attachments/20150219/e21c3125/attachment.html
> > >
> >
> > ------------------------------
> >
> > _______________________________________________
> > Codel mailing list
> > Codel@lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/codel
> >
> >
> > End of Codel Digest, Vol 29, Issue 1
> > ************************************
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://lists.bufferbloat.net/pipermail/codel/attachments/20150219/b67e540c/attachment.html
> >
>
> ------------------------------
>
> _______________________________________________
> Codel mailing list
> Codel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/codel
>
>
> End of Codel Digest, Vol 29, Issue 2
> ************************************
>
[-- Attachment #2: Type: text/html, Size: 25633 bytes --]
^ permalink raw reply [flat|nested] only message in thread