* Re: [Ecn-sane] [Make-wifi-fast] Fwd: [PATCH net-next v5 0/5] amt: add initial driver for Automatic Multicast Tunneling (AMT)
[not found] ` <CAHb6LvpYQWDDo5eCPXXmKL5OC5SqUbbx5_6EEWnCtuci7F9doQ@mail.gmail.com>
@ 2021-10-30 17:45 ` Dave Taht
2021-10-31 19:34 ` Holland, Jake
1 sibling, 0 replies; 3+ messages in thread
From: Dave Taht @ 2021-10-30 17:45 UTC (permalink / raw)
To: Bob McMahon; +Cc: Cake List, ECN-Sane, Make-Wifi-fast
What I'd used for multicast testing during the heyday of the cerowrt project was
http://uftp-multicast.sourceforge.net/
It gained RFC3168 style ecn support as a result, but I haven't tested
it in years.
On Sat, Oct 30, 2021 at 10:17 AM Bob McMahon <bob.mcmahon@broadcom.com> wrote:
>
> As an FYI, iperf 2 supports both source specific and standard multicast joins. I think this one of the few open source traffic tools that supports multicast testing.
>
> Bob
>
> On Sat, Oct 30, 2021 at 7:24 AM Dave Taht <dave.taht@gmail.com> wrote:
>>
>> This should be "fun".
>>
>> ---------- Forwarded message ---------
>> From: Taehee Yoo <ap420073@gmail.com>
>> Date: Sat, Oct 30, 2021 at 5:42 AM
>> Subject: [PATCH net-next v5 0/5] amt: add initial driver for Automatic
>> Multicast Tunneling (AMT)
>> To: <davem@davemloft.net>, <kuba@kernel.org>, <dsahern@kernel.org>,
>> <netdev@vger.kernel.org>
>> Cc: <dkirjanov@suse.de>, <ap420073@gmail.com>
>>
>>
>> This is an implementation of AMT(Automatic Multicast Tunneling), RFC 7450.
>> https://datatracker.ietf.org/doc/html/rfc7450
>>
>> This implementation supports IGMPv2, IGMPv3, MLDv1, MLDv2, and IPv4
>> underlay.
>>
>> Summary of RFC 7450
>> The purpose of this protocol is to provide multicast tunneling.
>> The main use-case of this protocol is to provide delivery multicast
>> traffic from a multicast-enabled network to sites that lack multicast
>> connectivity to the source network.
>> There are two roles in AMT protocol, Gateway, and Relay.
>> The main purpose of Gateway mode is to forward multicast listening
>> information(IGMP, MLD) to the source.
>> The main purpose of Relay mode is to forward multicast data to listeners.
>> These multicast traffics(IGMP, MLD, multicast data packets) are tunneled.
>>
>> Listeners are located behind Gateway endpoint.
>> But gateway itself can be a listener too.
>> Senders are located behind Relay endpoint.
>>
>> ___________ _________ _______ ________
>> | | | | | | | |
>> | Listeners <-----> Gateway <-----> Relay <-----> Source |
>> |___________| |_________| |_______| |________|
>> IGMP/MLD---------(encap)----------->
>> <-------------(decap)--------(encap)------Multicast Data
>>
>> Usage of AMT interface
>> 1. Create gateway interface
>> ip link add amtg type amt mode gateway local 10.0.0.1 discovery 10.0.0.2 \
>> dev gw1_rt gateway_port 2268 relay_port 2268
>>
>> 2. Create Relay interface
>> ip link add amtr type amt mode relay local 10.0.0.2 dev relay_rt \
>> relay_port 2268 max_tunnels 4
>>
>> v1 -> v2:
>> - Eliminate sparse warnings.
>> - Use bool type instead of __be16 for identifying v4/v6 protocol.
>>
>> v2 -> v3:
>> - Fix compile warning due to unsed variable.
>> - Add missing spinlock comment.
>> - Update help message of amt in Kconfig.
>>
>> v3 -> v4:
>> - Split patch.
>> - Use CHECKSUM_NONE instead of CHECKSUM_UNNECESSARY.
>> - Fix compile error.
>>
>> v4 -> v5:
>> - Remove unnecessary rcu_read_lock().
>> - Remove unnecessary amt_change_mtu().
>> - Change netlink error message.
>> - Add validation for IFLA_AMT_LOCAL_IP and IFLA_AMT_DISCOVERY_IP.
>> - Add comments in amt.h.
>> - Add missing dev_put() in error path of amt_newlink().
>> - Fix typo.
>> - Add BUILD_BUG_ON() in amt_smb_cb().
>> - Use macro instead of magic values.
>> - Use kzalloc() instead of kmalloc().
>> - Add selftest script.
>>
>> Taehee Yoo (5):
>> amt: add control plane of amt interface
>> amt: add data plane of amt interface
>> amt: add multicast(IGMP) report message handler
>> amt: add mld report message handler
>> selftests: add amt interface selftest script
>>
>> MAINTAINERS | 8 +
>> drivers/net/Kconfig | 16 +
>> drivers/net/Makefile | 1 +
>> drivers/net/amt.c | 3290 ++++++++++++++++++++++++++
>> include/net/amt.h | 386 +++
>> include/uapi/linux/amt.h | 62 +
>> tools/testing/selftests/net/Makefile | 1 +
>> tools/testing/selftests/net/amt.sh | 284 +++
>> tools/testing/selftests/net/config | 1 +
>> 9 files changed, 4049 insertions(+)
>> create mode 100644 drivers/net/amt.c
>> create mode 100644 include/net/amt.h
>> create mode 100644 include/uapi/linux/amt.h
>> create mode 100644 tools/testing/selftests/net/amt.sh
>>
>> --
>> 2.17.1
>>
>>
>>
>> --
>> Fixing Starlink's Latencies: https://www.youtube.com/watch?v=c9gLo6Xrwgw
>>
>> Dave Täht CEO, TekLibre, LLC
>> _______________________________________________
>> Make-wifi-fast mailing list
>> Make-wifi-fast@lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/make-wifi-fast
>
>
> This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.
--
I tried to build a better future, a few times:
https://wayforward.archive.org/?site=https%3A%2F%2Fwww.icei.org
Dave Täht CEO, TekLibre, LLC
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Ecn-sane] [Make-wifi-fast] Fwd: [PATCH net-next v5 0/5] amt: add initial driver for Automatic Multicast Tunneling (AMT)
[not found] ` <CAHb6LvpYQWDDo5eCPXXmKL5OC5SqUbbx5_6EEWnCtuci7F9doQ@mail.gmail.com>
2021-10-30 17:45 ` [Ecn-sane] [Make-wifi-fast] " Dave Taht
@ 2021-10-31 19:34 ` Holland, Jake
1 sibling, 0 replies; 3+ messages in thread
From: Holland, Jake @ 2021-10-31 19:34 UTC (permalink / raw)
To: Bob McMahon, Dave Taht; +Cc: Cake List, Make-Wifi-fast, ECN-Sane
[-- Attachment #1: Type: text/plain, Size: 6422 bytes --]
Yes, iperf2 and VLC are my main go-tos outside of my own stuff.
This was one of the big things that made me sad about iperf3. Thanks Bob for getting it in there, it was really helpful for me :)
-Jake
From: Bob McMahon via Make-wifi-fast <make-wifi-fast@lists.bufferbloat.net>
Reply-To: Bob McMahon <bob.mcmahon@broadcom.com>
Date: Sat,2021-10-30 at 10:17 AM
To: Dave Taht <dave.taht@gmail.com>
Cc: Cake List <cake@lists.bufferbloat.net>, Make-Wifi-fast <make-wifi-fast@lists.bufferbloat.net>, ECN-Sane <ecn-sane@lists.bufferbloat.net>
Subject: Re: [Make-wifi-fast] Fwd: [PATCH net-next v5 0/5] amt: add initial driver for Automatic Multicast Tunneling (AMT)
As an FYI, iperf 2 supports both source specific and standard multicast joins. I think this one of the few open source traffic tools that supports multicast testing.
Bob
On Sat, Oct 30, 2021 at 7:24 AM Dave Taht <dave.taht@gmail.com<mailto:dave.taht@gmail.com>> wrote:
This should be "fun".
---------- Forwarded message ---------
From: Taehee Yoo <ap420073@gmail.com<mailto:ap420073@gmail.com>>
Date: Sat, Oct 30, 2021 at 5:42 AM
Subject: [PATCH net-next v5 0/5] amt: add initial driver for Automatic
Multicast Tunneling (AMT)
To: <davem@davemloft.net<mailto:davem@davemloft.net>>, <kuba@kernel.org<mailto:kuba@kernel.org>>, <dsahern@kernel.org<mailto:dsahern@kernel.org>>,
<netdev@vger.kernel.org<mailto:netdev@vger.kernel.org>>
Cc: <dkirjanov@suse.de<mailto:dkirjanov@suse.de>>, <ap420073@gmail.com<mailto:ap420073@gmail.com>>
This is an implementation of AMT(Automatic Multicast Tunneling), RFC 7450.
https://datatracker.ietf.org/doc/html/rfc7450<https://urldefense.com/v3/__https:/datatracker.ietf.org/doc/html/rfc7450__;!!GjvTz_vk!A3ij1BC95UcJhHaWLSgiIdef_RePfYenud3dJANXLSHbiJJgd44psjItrAOc6Og$>
This implementation supports IGMPv2, IGMPv3, MLDv1, MLDv2, and IPv4
underlay.
Summary of RFC 7450
The purpose of this protocol is to provide multicast tunneling.
The main use-case of this protocol is to provide delivery multicast
traffic from a multicast-enabled network to sites that lack multicast
connectivity to the source network.
There are two roles in AMT protocol, Gateway, and Relay.
The main purpose of Gateway mode is to forward multicast listening
information(IGMP, MLD) to the source.
The main purpose of Relay mode is to forward multicast data to listeners.
These multicast traffics(IGMP, MLD, multicast data packets) are tunneled.
Listeners are located behind Gateway endpoint.
But gateway itself can be a listener too.
Senders are located behind Relay endpoint.
___________ _________ _______ ________
| | | | | | | |
| Listeners <-----> Gateway <-----> Relay <-----> Source |
|___________| |_________| |_______| |________|
IGMP/MLD---------(encap)----------->
<-------------(decap)--------(encap)------Multicast Data
Usage of AMT interface
1. Create gateway interface
ip link add amtg type amt mode gateway local 10.0.0.1 discovery 10.0.0.2 \
dev gw1_rt gateway_port 2268 relay_port 2268
2. Create Relay interface
ip link add amtr type amt mode relay local 10.0.0.2 dev relay_rt \
relay_port 2268 max_tunnels 4
v1 -> v2:
- Eliminate sparse warnings.
- Use bool type instead of __be16 for identifying v4/v6 protocol.
v2 -> v3:
- Fix compile warning due to unsed variable.
- Add missing spinlock comment.
- Update help message of amt in Kconfig.
v3 -> v4:
- Split patch.
- Use CHECKSUM_NONE instead of CHECKSUM_UNNECESSARY.
- Fix compile error.
v4 -> v5:
- Remove unnecessary rcu_read_lock().
- Remove unnecessary amt_change_mtu().
- Change netlink error message.
- Add validation for IFLA_AMT_LOCAL_IP and IFLA_AMT_DISCOVERY_IP.
- Add comments in amt.h.
- Add missing dev_put() in error path of amt_newlink().
- Fix typo.
- Add BUILD_BUG_ON() in amt_smb_cb().
- Use macro instead of magic values.
- Use kzalloc() instead of kmalloc().
- Add selftest script.
Taehee Yoo (5):
amt: add control plane of amt interface
amt: add data plane of amt interface
amt: add multicast(IGMP) report message handler
amt: add mld report message handler
selftests: add amt interface selftest script
MAINTAINERS | 8 +
drivers/net/Kconfig | 16 +
drivers/net/Makefile | 1 +
drivers/net/amt.c | 3290 ++++++++++++++++++++++++++
include/net/amt.h | 386 +++
include/uapi/linux/amt.h | 62 +
tools/testing/selftests/net/Makefile | 1 +
tools/testing/selftests/net/amt.sh | 284 +++
tools/testing/selftests/net/config | 1 +
9 files changed, 4049 insertions(+)
create mode 100644 drivers/net/amt.c
create mode 100644 include/net/amt.h
create mode 100644 include/uapi/linux/amt.h
create mode 100644 tools/testing/selftests/net/amt.sh
--
2.17.1
--
Fixing Starlink's Latencies: https://www.youtube.com/watch?v=c9gLo6Xrwgw<https://urldefense.com/v3/__https:/www.youtube.com/watch?v=c9gLo6Xrwgw__;!!GjvTz_vk!A3ij1BC95UcJhHaWLSgiIdef_RePfYenud3dJANXLSHbiJJgd44psjItJ65P8PM$>
Dave Täht CEO, TekLibre, LLC
_______________________________________________
Make-wifi-fast mailing list
Make-wifi-fast@lists.bufferbloat.net<mailto:Make-wifi-fast@lists.bufferbloat.net>
https://lists.bufferbloat.net/listinfo/make-wifi-fast<https://urldefense.com/v3/__https:/lists.bufferbloat.net/listinfo/make-wifi-fast__;!!GjvTz_vk!A3ij1BC95UcJhHaWLSgiIdef_RePfYenud3dJANXLSHbiJJgd44psjIteu0IZA4$>
This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.
[-- Attachment #2: Type: text/html, Size: 10727 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread