From: Kalle Valo <kvalo@qca.qualcomm.com>
To: "Toke Høiland-Jørgensen" <toke@toke.dk>
Cc: make-wifi-fast@lists.bufferbloat.net,
linux-wireless@vger.kernel.org,
"Toke Høiland-Jørgensen" <toke@toke.dk>,
"Tim Shepard" <shep@alum.mit.edu>, "Felix Fietkau" <nbd@nbd.name>
Subject: Re: [Make-wifi-fast] [v6] ath9k: Switch to using mac80211 intermediate software queues.
Date: Wed, 09 Nov 2016 22:42:56 -0000 [thread overview]
Message-ID: <689eea51fa77432cbe4c70c6c2fe7b13@euamsexm01a.eu.qualcomm.com> (raw)
In-Reply-To: <20161109113149.5724-1-toke@toke.dk>
Toke Høiland-Jørgensen wrote:
> This switches ath9k over to using the mac80211 intermediate software
> queueing mechanism for data packets. It removes the queueing inside the
> driver, except for the retry queue, and instead pulls from mac80211 when
> a packet is needed. The retry queue is used to store a packet that was
> pulled but can't be sent immediately.
>
> The old code path in ath_tx_start that would queue packets has been
> removed completely, as has the qlen limit tunables (since there's no
> longer a queue in the driver to limit).
>
> The mac80211 intermediate software queues offer significant latency
> reductions, and this patch allows ath9k to realise them. The exact gains
> from this varies with the test scenario, but in an access point scenario
> we have seen latency reductions ranging from 1/3 to as much as an order
> of magnitude. We also achieve slightly better aggregation.
>
> Median latency (ping) figures with this patch applied at the access point,
> with two high-rate stations and one low-rate station (HT20 5Ghz), running
> a Flent rtt_fair_var_up test with one TCP flow and one ping flow going to
> each station:
>
> Fast station Slow station
> Default pfifo_fast qdisc: 430.4 ms 638.7 ms
> fq_codel qdisc on iface: 35.5 ms 211.8 ms
> This patch set: 22.4 ms 38.2 ms
>
> Median aggregation sizes over the same test:
>
> Default pfifo_fast qdisc: 9.5 pkts 1.9 pkts
> fq_codel qdisc on iface: 11.2 pkts 1.9 pkts
> This patch set: 13.9 pkts 1.9 pkts
>
> This patch is based on Tim's original patch set, but reworked quite
> thoroughly.
>
> Cc: Tim Shepard <shep@alum.mit.edu>
> Cc: Felix Fietkau <nbd@nbd.name>
> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Perfect, just what I was hoping to see :) Unless something really
surprising comes up I should apply this within the next few days.
--
https://patchwork.kernel.org/patch/9419029/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
next prev parent reply other threads:[~2016-11-09 22:42 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20160617090929.31606-1-toke@toke.dk>
[not found] ` <20160617090929.31606-2-toke@toke.dk>
2016-06-17 13:28 ` [Make-wifi-fast] [PATCH 1/2] ath9k: use " Felix Fietkau
2016-06-17 13:43 ` Toke Høiland-Jørgensen
2016-06-17 13:48 ` Felix Fietkau
2016-06-17 16:33 ` Felix Fietkau
2016-06-17 14:10 ` [Make-wifi-fast] [ath9k-devel] " Dave Taht
2016-06-18 19:05 ` [Make-wifi-fast] [PATCH] ath9k: Switch to using " Toke Høiland-Jørgensen
2016-07-06 16:16 ` [Make-wifi-fast] [PATCH v2] " Toke Høiland-Jørgensen
2016-07-06 17:58 ` Sebastian Gottschall
2016-07-06 18:13 ` Felix Fietkau
2016-07-06 18:52 ` Toke Høiland-Jørgensen
2016-07-06 19:00 ` Felix Fietkau
2016-07-06 19:08 ` Toke Høiland-Jørgensen
2016-07-06 19:34 ` [Make-wifi-fast] [PATCH v3] " Toke Høiland-Jørgensen
2016-07-08 14:27 ` [Make-wifi-fast] [v3] " Kalle Valo
2016-07-08 15:53 ` Toke Høiland-Jørgensen
2016-07-08 16:10 ` Felix Fietkau
2016-07-08 16:28 ` Toke Høiland-Jørgensen
2016-07-08 16:31 ` Felix Fietkau
2016-07-08 16:38 ` Toke Høiland-Jørgensen
2016-07-08 18:24 ` Sebastian Gottschall
2016-07-09 12:00 ` Toke Høiland-Jørgensen
2016-08-05 16:03 ` [Make-wifi-fast] [PATCH v4] " Toke Høiland-Jørgensen
2016-08-22 15:44 ` Kalle Valo
2016-08-22 16:16 ` Toke Høiland-Jørgensen
2016-08-22 17:02 ` Kalle Valo
2016-08-22 17:13 ` Toke Høiland-Jørgensen
2016-08-23 6:59 ` Kalle Valo
2016-08-23 8:52 ` Arend van Spriel
2016-10-05 14:02 ` Toke Høiland-Jørgensen
2016-10-05 15:50 ` Kalle Valo
2016-10-05 16:55 ` Toke Høiland-Jørgensen
2016-10-05 17:54 ` Kalle Valo
2016-10-05 19:56 ` Toke Høiland-Jørgensen
2016-09-02 14:00 ` [Make-wifi-fast] [PATCH v5] " Toke Høiland-Jørgensen
2016-09-03 10:16 ` Felix Fietkau
2016-10-07 11:43 ` [Make-wifi-fast] [v5] " Kalle Valo
2016-11-09 2:22 ` Kalle Valo
2016-11-09 11:31 ` [Make-wifi-fast] [PATCH v6] " Toke Høiland-Jørgensen
2016-11-09 22:42 ` Kalle Valo [this message]
2016-11-09 23:10 ` [Make-wifi-fast] [v6] " Toke Høiland-Jørgensen
2016-11-15 15:00 ` Kalle Valo
2016-11-24 13:54 ` [Make-wifi-fast] [PATCH v2] ath9k: Introduce airtime fairness scheduling between stations Toke Høiland-Jørgensen
2016-11-28 10:12 ` [Make-wifi-fast] [PATCH v3] " Toke Høiland-Jørgensen
2016-12-15 8:43 ` [Make-wifi-fast] [v3] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/make-wifi-fast.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=689eea51fa77432cbe4c70c6c2fe7b13@euamsexm01a.eu.qualcomm.com \
--to=kvalo@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
--cc=make-wifi-fast@lists.bufferbloat.net \
--cc=nbd@nbd.name \
--cc=shep@alum.mit.edu \
--cc=toke@toke.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox