From: Dave Taht <dave.taht@gmail.com>
To: "Toke Høiland-Jørgensen" <toke@toke.dk>
Cc: make-wifi-fast@lists.bufferbloat.net
Subject: Re: [Make-wifi-fast] Updated LEDE build with airtime patches
Date: Thu, 24 Nov 2016 09:57:13 -0800 [thread overview]
Message-ID: <CAA93jw4bFhgHz0EOmMqpkboJL=HFHSd=Bt29HL7eXruN=FAkVA@mail.gmail.com> (raw)
In-Reply-To: <CAA93jw67=8E_NtLokeHtZR5pijBoYhuQMGcgS=ZaRb03J42pTQ@mail.gmail.com>
on the rrul test, the BK queue got no connection, and I lost the
connection several times during it. While I was testing
the ath9k, a new message showed up in the ath10k log.
It would not surprise me if a shorter codel target made the hardware
queues work better.
Otherwise the short test runs I just did (tcp_nup, tcp_ndown) were fine.
0x00001000
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.777307] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.784831] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.792409] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.799962] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.807518] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.815016] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.822565] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.830113] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.837657] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
Thu Nov 24 17:50:58 2016 kern.warn kernel: [ 2760.845181] ath10k_pci
0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
On Thu, Nov 24, 2016 at 9:35 AM, Dave Taht <dave.taht@gmail.com> wrote:
> It's more the quantum than the target that is an issue on *wrt, IMHO.
>
> (I got no problem with testing each of these in isolation)
>
> I am starting a test run now. So far no crashes on the ath9k side on the archer.
>
> Two things I am not testing on this platform are HT40 and crypto. (I
> was using the x86 versions for that). Nor was I monitoring cpu usage
> on the previous archer test runs (sigh), and for some value of
> consistency, am not doing it on these either. I'd *really* like more
> ht40.....
>
> I will finish bootstrapping up my "c.h.i.p." nodes to do better
> airtime fairness testing soon via the rtt_var tests.
>
> Ideally I'd like more to join in on this hopefully last push to get
> the core patches upstream.
>
> Note that in the US...
>
> it's the thanksgiving holiday which can be interpreted as either
> people spending more time with family - or being free enough from work
> to dig in and test the heck out of this stuff (or in my case, fire off
> a big automated test, while spending time with family). :)
>
>
> On Thu, Nov 24, 2016 at 9:14 AM, Toke Høiland-Jørgensen <toke@toke.dk> wrote:
>> Yup. Planning to look into the codel tuning issue next. Until then I figured I'd keep the patch set small...
>>
>> On 24 November 2016 18:01:32 CET, Dave Taht <dave.taht@gmail.com> wrote:
>>>It looks like you dropped the quantum 1514/codel 5ms from the patchset?
>>>
>>>On Thu, Nov 24, 2016 at 7:01 AM, Toke Høiland-Jørgensen <toke@toke.dk>
>>>wrote:
>>>> Toke Høiland-Jørgensen <toke@toke.dk> writes:
>>>>
>>>>> I created an updated build of current LEDE head with added airtime
>>>>> fairness patches, and the patch to re-enable the intermediate queues
>>>for
>>>>> ath10k. I.e., the contents of my repo here:
>>>>>
>>>>> https://kau.toke.dk/git/lede/
>>>>>
>>>>> Builds for some common ar71xx devices are here:
>>>>>
>>>>> https://kau.toke.dk/lede/airtime-fairness-builds/ar71xx/generic/
>>>>
>>>>
>>>> These builds have now been updated to a new version of the airtime
>>>> fairness patch (that was also posted to the list a few hours ago).
>>>> Please take them for a spin. Once I have confirmation that they don't
>>>> blow up catastrophically, I'll submit the patch for inclusion in LEDE
>>>:)
>>>>
>>>> -Toke
>>>> _______________________________________________
>>>> Make-wifi-fast mailing list
>>>> Make-wifi-fast@lists.bufferbloat.net
>>>> https://lists.bufferbloat.net/listinfo/make-wifi-fast
>>
>
>
>
> --
> Dave Täht
> Let's go make home routers and wifi faster! With better software!
> http://blog.cerowrt.org
--
Dave Täht
Let's go make home routers and wifi faster! With better software!
http://blog.cerowrt.org
next prev parent reply other threads:[~2016-11-24 17:57 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 16:30 Toke Høiland-Jørgensen
2016-11-17 16:32 ` Dave Taht
2016-11-18 15:30 ` Toke Høiland-Jørgensen
2016-11-18 16:44 ` Noah Causin
2016-11-18 16:50 ` Toke Høiland-Jørgensen
2016-11-19 3:00 ` Noah Causin
2016-11-19 17:18 ` Dave Taht
2016-11-19 17:42 ` Noah Causin
2016-11-17 19:08 ` Dave Taht
2016-11-17 19:22 ` Dave Taht
2016-11-17 19:36 ` Kevin Darbyshire-Bryant
2016-11-17 19:45 ` Dave Taht
2016-11-17 19:54 ` Dave Taht
2016-11-18 15:28 ` Toke Høiland-Jørgensen
2016-11-19 18:59 ` Jonathan Morton
2016-11-24 15:01 ` Toke Høiland-Jørgensen
2016-11-24 17:01 ` Dave Taht
2016-11-24 17:14 ` Toke Høiland-Jørgensen
2016-11-24 17:35 ` Dave Taht
2016-11-24 17:57 ` Dave Taht [this message]
2016-11-25 5:40 ` Dave Taht
2016-11-25 14:53 ` Toke Høiland-Jørgensen
2016-11-25 10:21 ` Loganaden Velvindron
2016-11-25 14:51 ` Toke Høiland-Jørgensen
2016-12-09 17:00 ` Loganaden Velvindron
2016-12-10 22:28 ` Toke Høiland-Jørgensen
2016-12-13 16:18 ` Loganaden Velvindron
2016-12-13 17:42 ` Toke Høiland-Jørgensen
2016-12-13 17:50 ` Leonidas Spyropoulos
2016-12-13 17:52 ` Loganaden Velvindron
2016-12-13 17:57 ` Leonidas Spyropoulos
2016-12-13 18:03 ` Loganaden Velvindron
2016-12-13 19:26 ` Toke Høiland-Jørgensen
[not found] <CALukJKQMs3KyHJYzQ47p8hYM+MCpCfVjcWagr=_JHe_zhwarSA@mail.gmail.com>
[not found] ` <CALukJKSMiyyFNRST6uHggYqLqeDy4RnzLofhtoDuEEd5RpC+sw@mail.gmail.com>
[not found] ` <CALukJKSoP_X6_+AMsFLr=obkmn554jHwfc3=aAVEs8GNcdC1Qw@mail.gmail.com>
[not found] ` <CALukJKRoa4fWJvXCyS+qzH3QAAmeA+5iQjQRCiRSXQxaj5A+iA@mail.gmail.com>
2016-11-19 19:49 ` Jon Pike
[not found] ` <CAA93jw7s0Fsu4PFn=7SoJx8HCzMX=FX6soh=j_XiTeEHCrxf6A@mail.gmail.com>
[not found] ` <CALukJKTr9EeTCiyHoQLan1NRp4d+gmeG8Hh3FMWD0ochxM1DhA@mail.gmail.com>
2016-11-20 3:05 ` Jon Pike
[not found] <d5fb6961-b788-8e33-2293-9e4831385510@cox.net>
[not found] ` <4f96dab7-3785-88b8-ed20-4cdd68ff26ee@cox.net>
[not found] ` <CALukJKR7y82kxve7+QsLD6fQ9+cBfLii37_19R=4EJwSBQQM-A@mail.gmail.com>
2016-11-20 3:24 ` Jon Pike
2016-11-20 3:32 ` Noah Causin
2016-11-20 3:52 ` Jon Pike
2016-11-20 4:03 ` Noah Causin
[not found] <CALukJKTgFBfF7LAa-OZC3MM-pZO+HbECLC-87K5D2zcAbqja4w@mail.gmail.com>
[not found] ` <CALukJKROBUPNsR++i_7fDnbJYB+-_9_WBgStaeaQRRA5d-dd5A@mail.gmail.com>
[not found] ` <CALukJKReKpgwwmM22qjrAa27TEh3KA2srQci8+VMC0J6czomcw@mail.gmail.com>
[not found] ` <CALukJKQpO4VNgJ85-0L6ku4zBcx4nmQD8-0XWH1kSObMysFDag@mail.gmail.com>
[not found] ` <CALukJKQOCu7Z=bxTuLBG2YPC=1XYM2bWgbsOVq6NN2XkSARpQw@mail.gmail.com>
[not found] ` <CALukJKR1zMLdOxHALu7Jr_wTPpBc4+QLi8pFk3txVqdGz945yA@mail.gmail.com>
[not found] ` <CALukJKRSpPq112HX5vdm01mHey+HU5Qz-73jYk42uyrQWer1GQ@mail.gmail.com>
[not found] ` <CALukJKT-gP-Qof4avJWtwqHhzQcuFT28D7GDhaHOdNmhyVjOkQ@mail.gmail.com>
[not found] ` <CALukJKQ6oyL+Nw7whxOJFmUyMZ2Y0MFdCQ7cf+viKbY22hwyzQ@mail.gmail.com>
[not found] ` <CALukJKR7+XHp84n3pb_Q9KAfMuTahLEQBJMyt=CtutW37H-ViQ@mail.gmail.com>
[not found] ` <CALukJKRdS8GYNvLzCQZLPE2tYeNhyN7GDYpDgq8Vbyn-UPdxqQ@mail.gmail.com>
[not found] ` <CALukJKQUVi+WiHb6Wqa=U-tkpxBje=P15VyQji0jiy5NU18BwQ@mail.gmail.com>
[not found] ` <CALukJKT3YEn-qEL9No+THLtmksCp-drfeBw9avdr7P406JXDvg@mail.gmail.com>
[not found] ` <CALukJKQHgLGuAXQOgTbuiT0GGzT1H5yOjvcA-itRsuj6W_PqUw@mail.gmail.com>
[not found] ` <CALukJKQzgBnJuW=PcOFpyX28bJ-NNAXMYHv-JNJqQhymwkV60A@mail.gmail.com>
[not found] ` <CALukJKTNM4oeTgkmfvrrcC5VwTtYGr9UH7NU2RHyB28gPKK+Cw@mail.gmail.com>
2016-11-26 5:58 ` Jon Pike
2016-12-02 18:14 Jon Pike
2016-12-02 18:41 ` Noah Causin
2016-12-04 9:39 Jon Pike
2016-12-04 10:11 Jon Pike
2016-12-04 16:33 ` Noah Causin
2016-12-06 20:54 ` Loganaden Velvindron
2016-12-06 20:58 ` Dave Taht
2016-12-06 20:59 ` Dave Taht
2016-12-06 21:02 ` Loganaden Velvindron
2016-12-06 21:08 ` Loganaden Velvindron
2016-12-06 21:12 ` Dave Taht
2016-12-09 8:23 Leonidas Spyropoulos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/make-wifi-fast.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAA93jw4bFhgHz0EOmMqpkboJL=HFHSd=Bt29HL7eXruN=FAkVA@mail.gmail.com' \
--to=dave.taht@gmail.com \
--cc=make-wifi-fast@lists.bufferbloat.net \
--cc=toke@toke.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox