I started evaluating the ubnt ac lite as a new platform to use for testing - they have good antennas and do gigE POE (which makes it easier to lay out a distance test) - installing lede was a snap and I got 450+mbits throughput out of them on vht80. Looking *nice*... ... But my mission was to look at latencies at lower rates, so I tried out mcs1,4,minstrel at ht20 on the ath9k component of this AP. Looks like progress. My *guess* from looking at this plot (40ms median latency), (misnamed, just look at bandwidth groupings) - was * ath9k ath9 intermediate queues are enabled codel is still set to target 20ms rather than 5ms fq is still disabled (and quantum 300, rather than 1514) no toke airtime fairness * ath10k intermediate queues disabled, no fq_codel at all Please note, I'm not complaining, just confirming... I needed a baseline!! I've been mostly leveraging toke's builds, from felix's staging tree, which are much closer to the whole enchalada... But what's next for staging or head? Are all the relevant ath10k bits in there? -- Dave Täht Let's go make home routers and wifi faster! With better software! http://blog.cerowrt.org