On Wed, Sep 4, 2019 at 10:06 PM Valent Turkovic <valent@otvorenamreza.org>
wrote:

> Finally got netperf and flent working on Raspberry Pi, thanks Toke to
> pushing me in the right direction of manual compilation.
>
> Here are the steps to get netperf and flent working of latest clean
> Rasbian install:
>
>    $ sudo apt install autotools-dev automake
>    $ git clone https://github.com/HewlettPackard/netperf.git
>    $ cd netperf
>    $ ./autogen.sh
>    $ ./configure --enable-demo
>    $ make
>    $ sudo make install
>    $ sudo pip install flent
>
> And that is it :)
>

In order to get plots to work matplotlib needs to be installed, so:
    $ sudo pip install matplotlib

I also answered this question raised on Raspberry Pi StackExchange:
https://raspberrypi.stackexchange.com/questions/99695/netperf-command-doesnt-exist-on-raspbian/102218#102218