Another interesting paper with a power metric. Bob On Sat, Aug 4, 2018 at 5:10 PM, Bob McMahon wrote: > It's a metric to determine if network congestion is being optimized. > Here's just one of many papers that use. This paper says that flow > controlled, per network power, can't be optimized with local information > only. > > Bob > > On Sat, Aug 4, 2018 at 3:47 PM, Jeremy Harris wrote: > >> On 08/04/2018 06:55 PM, Bob McMahon wrote: >> > FYI, I've added a netpower metric to iperf 2. >> > >> > Below are two runs over wired GigE comparing Google's BBR >> > with cubic. Note, for the >> > network power the delay units are microseconds while the throughput are >> > seconds. >> >> Why is it useful? >> >> It appears to be calculated as bandwidth divided by latency, so the >> units are bits / time^2. The word "power" in the naming feels >> misleading. >> -- >> Cheers, >> Jeremy >> >> _______________________________________________ >> Make-wifi-fast mailing list >> Make-wifi-fast@lists.bufferbloat.net >> https://lists.bufferbloat.net/listinfo/make-wifi-fast > > >